ThomasNet Industrial Newsroom -

Recycled Fabric HVAC Duct meets green buildings initiatives.

info@productnews.com (ThomasNet News) — Thu, 11 Jun 2009 08:33:57 -0500

Constructed of 55% recycled fabric (80% post-industrial/20% post-consumer), 8-product air dispersion line includes 2 models: Sedona Xm(TM) permeable, premium fabric with anti-microbial treatment and Coronado permeable, designer fabric in 4 patterns of cork, harvest, galvanized, or camo. Another recycled air dispersion product, Rx(TM) permeable premium fabric, uses 50% recycled fabric face and metal back pan with 60-80% recycled metal for emphasis on laboratory applications.

This story is related to the following:
HVAC
Green & Clean

Search for suppliers of: HVAC Ducts | Fabric Ducts

Sliding Panel simplifies access to ductwork.

info@productnews.com (ThomasNet News) — Fri, 20 Mar 2009 08:34:11 -0500

Sliding Access Panel (SAP) features sleeve which enables access to laser-cut opening in ducting. Two clamps hold panel tightly in place. By opening clamps, panel can slide open for easy access for inspection or maintenance tasks. Panel opening does not contain any bolts to snag debris.

This story is related to the following:
HVAC

Search for suppliers of: HVAC Ducts | Duct Accessories

Fabric Air Ducts combat thermal decay in under floor HVAC.

info@productnews.com (ThomasNet News) — Wed, 31 Dec 2008 08:27:56 -0500

UnderFloorSox(TM) 12-18 in. dia round fabric air ducts distribute even air dispersion and temperature to perimeter, remote, and other high heat load zone areas. No condensation forms on duct surfaces, minimizing mold, mildew, and other microbial dangers. Lightweight modular length sections are easily zippered together on-site during installation, and labels are provided every 2 feet to indicate airflow direction and data cabling clearance considerations.

This story is related to the following:
HVAC

Search for suppliers of: Air Diffusers | Fabric Ducts | HVAC Ducts

Duct and Innerduct Blowing Accessories aid cable placement.

info@productnews.com (ThomasNet News) — Wed, 03 Dec 2008 07:46:37 -0500

Available in variety of sizes that accommodate 1-5 in. dia ducts, Duct and Innerduct Blowing Accessories eliminate air pressure leaks, air-flow control issues, inconsistent rope diameters, difficult equipment handling, over-crowded ducts, and other cable blowing problems. They include safety-locking control valve, 3/16, ¼, and 3/8 rope adapters, innerduct and conduit seal-offs, duct projectiles, and low-friction missile line carriers. Products aid in fiber optic cable placement.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
HVAC
Optics and Photonics

Search for suppliers of: Cable Accessories | Duct Accessories | Fiber Optic Accessories

Rack Cooling Solution eliminates hot spots in datacenters.

info@productnews.com (ThomasNet News) — Mon, 01 Dec 2008 07:50:02 -0500

HP 10K G2 Air Duct channels hot exhaust air from rear of racks directly into top plenum to eliminate hot spots and air mixing in datacenter, increasing cooling efficiency by returning hotter air to computer room air handler units. Solution suits racks using 5-14 kW power, and air duct is adjustable for different ceiling heights. With no fans or moving parts, units operate silently, can be retrofitted to existing problem racks, and can work with single or multiple racks.

This story is related to the following:
Plant Furnishings and Accessories
HVAC

Search for suppliers of: Computer Room Equipment & Supplies | Air Handling Systems | Air Ducts

Flexible Insulated Hose operates from -65 to 550°F.

info@productnews.com (ThomasNet News) — Fri, 11 Jan 2008 07:30:42 -0500

Designed to keep extreme temperatures inside, Flex-Vest® Insulated Hose features 1 in. fiberglass R-value=4 insulation sandwiched between double-ply silicone-coated fiberglass fabric inside layer, reinforced with spring steel wire helix. Outer layer is single-ply neoprene-coated polyester fabric, also reinforced with spring steel wire helix. Suited for industrial air movement and fume extraction, hose conforms to UL-94 and comes in 1-6 in. ID sizes and 12 ft lengths.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Flexible Ducting Hose | Industrial Hose | Air Hose | Insulated Ducts

Tool simplifies HVAC/R duct connection and installation.

info@productnews.com (ThomasNet News) — Wed, 28 Nov 2007 07:45:34 -0500

Duct Tightener tool allows one person to connect duct runs by tapping tool into place while V-notch pulls and holds duct together for drive cleat insertion. Manufactured with 16 ga SS, tool features rust-resistant zinc coating. Compact unit fits into tool belt and V-notch accommodates varying duct run gaps and end tabs.

This story is related to the following:
HVAC

Search for suppliers of: HVAC Tools | HVAC Tools & Supplies

Spot Cooling Duct stays in place once it is bent.

info@productnews.com (ThomasNet News) — Mon, 19 Nov 2007 07:46:55 -0500

Pliaduct® is 100% rigid, self-supporting PVC duct with ribbon-lock construction that lets users expand diameter up to 25% by twisting it to fit nozzles, funnels, or fittings. Able to be reshaped and spliced together without tools, wireless and flame-retardant duct is offered with plain ends in 2-6 in. dia sizes in standard 25 ft lengths and 8-12 in. dia sizes in 10 in. lengths. Chemical-resistant product has -10 to +150°F operating temperature range.

This story is related to the following:
HVAC

Search for suppliers of: PVC Ducts

Clamped Duct carries mists, fumes, dust, and trim scrap.

info@productnews.com (ThomasNet News) — Wed, 14 Feb 2007 06:38:45 -0500

Designed to hasten installation and facilitate system modification, Clamp-Together Duct is available in 24-10 gauge thick galvanized or stainless steel in 1 in. dia increments from 3-24 in. It is assembled with lifetime-guaranteed Forever Clamp and suited for any negative-pressure ventilation system up to 40 in. wg with entrained dust, sand, fumes, mist, smoke, chips, or trim scrap. Adjustable sleeves and components enable field fitting to any length.

This story is related to the following:
HVAC
Mounting and Attaching Products

Search for suppliers of: Galvanized Steel Ducts | Stainless Steel Ducts | Ducting

Duct Gaskets offer gap-free seal for HVAC applications.

info@productnews.com (ThomasNet News) — Fri, 08 Sep 2006 07:26:35 -0500

One-piece pre-cut duct gaskets feature high tack adhesive coated directly on polyethylene foam backing to eliminate risk of delamination. Adhesive coating is available on 1 or 2 sides and paper release liner reduces tearing and is crack resistant. Square and rectangular scissor gaskets can be custom made to fit any specified size opening, and circle gaskets are available from 4-24 in. ID.

This story is related to the following:
HVAC
Mounting and Attaching Products

Search for suppliers of: Duct Accessories | Gaskets

Cleanroom Plenum Sections offer application flexibility.

info@productnews.com (ThomasNet News) — Tue, 15 Aug 2006 08:08:24 -0500

Available in various configurations, Series 150 Vertical Flow Plenum Sections create modular systems that meet cleanroom application needs. Full ceiling, HEPA filter plenum sections provide filtered laminar flow air to clean areas. Series 151 have blowers on end and freestanding 551 series have legs added. Both can be building suspended with or without curtains. Units with blowers on top are Series 152, or freestanding Series 552 with legs added.

This story is related to the following:
HVAC
Plant Furnishings and Accessories
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laminar Flow Workstations | Laminar Flow Cleanroom Equipment | Plenums

Duct Liner includes recycled content.

info@productnews.com (ThomasNet News) — Wed, 26 Jul 2006 08:19:29 -0500

Featuring fortified glass mat airstream surface, LinaTex(TM) Textile Fiber Duct Liner resists fiber erosion when exposed to airstream in commercial duct systems. Flexible, high-density mat will also resist pull-through when pinning, minimizing need for repairs. To satisfy demand for products that support green building programs, LinaTex(TM) contains up to 75% of pre-consumer and post-industrial content.

This story is related to the following:
HVAC
Green & Clean

Search for suppliers of: Duct Liners

Radiation Dampers connect to ductwork at various angles.

info@productnews.com (ThomasNet News) — Wed, 19 Jul 2006 08:06:15 -0500

Fiberglass plenum box with ceiling radiation damper is designed as 1 and 1.5 in. thick rigid ductboard with registers/grilles or drop duct applications. Available in I, J, and K models with standard sizes ranging from 8 x 4 to 16 x 16. J and K models are offered in either R4.2 or R6.0 insulation thickness. All ceiling radiation dampers hold ARL approval for 1 hr fire resistance rating for use in UL Fire Resistance Rated Wood Truss Assemblies.

This story is related to the following:
HVAC
Safety and Security Equipment

Search for suppliers of: Plenums | Duct Dampers | Ceiling Dampers | Radiation Shielding Equipment

Support System holds working loads up to 44 lb.

info@productnews.com (ThomasNet News) — Thu, 23 Mar 2006 07:03:46 -0500

Available in 6.6, 16.4, and 32.8 ft lengths, galvanized steel CADDY® SPEED LINK LD suspends static loads, even at angle, and offers alternative to jack chain and threaded rods in lighting, ductwork, and other installation projects. Wire rope measures 0.059 in. with crimped-on hook that holds working loads up to 44 lb with 5:1 safety factor. Stainless steel locking device ensures stability and allows additional adjustment after wire insertion.

This story is related to the following:
HVAC

Search for suppliers of: Duct Supports

Silicone Fiberglass Duct provides air/fume extraction.

info@productnews.com (ThomasNet News) — Mon, 13 Mar 2006 07:10:46 -0500

Designed for vehicular exhaust extraction and high-temperature air transfer, single-ply U-Lok 440 features flexible Mechanical Lock Construction(TM), which provides tear and tensile strength, eliminating wire movements. Available in diameters from 2-20 in. and length of 25 ft, U-Lok 440 is rated for temperatures from -60 to +500°F. Applications include high temperature air supply, exhaust hose reels, garage fume control, and combustion by-product transfer.

This story is related to the following:
HVAC

Search for suppliers of: High Temperature Ducts | Flexible Ducts | Fiberglass Ducts | Exhaust Ducts

Air Filter/Plenum is offered in custom, 1-piece design.

info@productnews.com (ThomasNet News) — Tue, 27 Sep 2005 07:05:24 -0500

Targeted for industrial machinery applications, custom-designed air filters with matched plenums can be manufactured to any shape or size. Decorative finishes, such as epoxy powder coating, can be specified, and chromate or irridite finishes are available for corrosion protection. Available filter media includes Quadrafoam and Quadrafoam II, rated UL 94 HF-1, cleanable and reusable, and offered in black, gray, or green. Custom prototype can be produced in 5 working days.

This story is related to the following:
Electronic Components and Devices
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Electronic Enclosure Filters | Plenums

HVAC Duct Liner is composed of rotary-type glass fibers.

info@productnews.com (ThomasNet News) — Fri, 11 Mar 2005 07:38:18 -0500

Primarily used as acoustical liner, ToughGardâ"¢ R also helps improve energy-efficiency of heating and cooling systems. Air stream surface contains antimicrobial agent and resists tearing, puncturing, and surface wear during installation and cleaning. It also serves as barrier against ingress of dust and dirt into insulation. Protected against moisture, liner suits systems operating at velocities up to 6,000 fpm and temperatures up to 250°F.

This story is related to the following:
HVAC
Safety and Security Equipment

Search for suppliers of: Duct Liners | Fiberglass Insulation

Rigid Liner Board suits large ducts and plenums.

info@productnews.com (ThomasNet News) — Fri, 11 Mar 2005 07:38:17 -0500

ToughGardâ"¢ Board serves as acoustical liner for systems operating at velocities up to 6,000 fpm and temperatures to 250°F. It is composed of rotary-glass fibers bonded with thermosetting resin. Black non-woven mat, bonded to airstream surface, serves as barrier against infiltration of dust and dirt. Air stream surface features coating that repels moisture, and EPA-registered antimicrobial agent to minimize potential of microbial growth that may affect product.

This story is related to the following:
HVAC

Search for suppliers of: Duct Liners

Duct Liner offers optimal acoustic and thermal performance.

info@productnews.com (ThomasNet News) — Fri, 11 Mar 2005 07:38:16 -0500

ToughGard2 Textile Duct Liner is designed for heating and cooling systems operating at velocities up to 6,000 fpm and temperatures to 250°F. It is composed of textile-type glass fibers firmly bonded together with thermosetting resin and overlaid with fire-resistant, black air stream surface containing EPA-registered antimicrobial agent. Liner offers resistance to tearing, puncturing, and surface wear, and includes Certa*Edgeâ"¢ Coat to seal edge fibers.

This story is related to the following:
HVAC

Search for suppliers of: Duct Liners

Fume Control Duct is suited for welding environments.

info@productnews.com (ThomasNet News) — Mon, 07 Mar 2005 07:47:42 -0500

Used to solve fume control issues in hazardous environments where high heat, sparks, and slag are commonplace, Flame Retardant Fume Control Duct (SF-TPR-FR) features TPR construction for flexibility and use in cramped, limited spaces with tight corners. Product, made with UL 94VO-approved material, has operating temperature range of -40 to +300°F and is available with or without encapsulated wire. Sizes range from ¾â�"24 in. with lengths of 25 and 50 ft.

This story is related to the following:
HVAC

Search for suppliers of: Hose Ducting