ThomasNet Industrial Newsroom -

Outdoor Filter Fans feature NEMA 3R rating.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Oct 2008 07:36:12 -0500

Constructed of painted steel, Advantage Sentry Series offers cooling solution where filtered, ambient air can be used to cool components that can tolerate temperatures slightly higher than ambient. Units offer integral finger protection and have synthetic filter media. Available in 8 models ranging from 32-988 cfm, fans feature standard voltages of 115 and 230 Vac, and are also available in optional dc voltages.

This story is related to the following:
HVAC

Search for suppliers of: Electronic Equipment Cooling Fans | Electric Equipment Cooling Fans

Dry Dust Mitigation Filter targets ethanol plants.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Sep 2008 07:39:50 -0500

Featuring self-contained cleaning system that does not require compressed air, one-piece Big Round Filter is equipped with rotating arm, 2 sealed bearings, direct-drive gear box, and 2 inlet options. Tangential inlet is amenable for heavier loading applications such as plant's receiving and grinding areas, while high entry inlet is suited for lighter loading applications such as distillers dried grains load-out areas.

This story is related to the following:
HVAC

Search for suppliers of: Dust Filters

Exhaust Fans suit roof or wall mount applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Sep 2008 07:36:31 -0500

Constructed with weather-resistant spun aluminum housing, CDB Belt Drive Downblast Exhaust Fans remove heat and humidity while allowing clean air in from outdoors. Units include backward inclined, non-overloading wheels; fully ventilated motor cooling compartment; and variable pitch motor pulley that allows for field adjustment and system balancing. Available in single and 3-phase voltages, fans feature belt drive capacities to 17,650 cfm and max temperature rating of 110°F.

This story is related to the following:
HVAC

Search for suppliers of: Belt Driven Fans | Ventilating Exhaust Fans | Backward Inclined Fans

Filter Fans have functional design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Sep 2008 07:25:39 -0500

Series FF018 CE compliant filter fans feature filter material that is temperature resistant to 100°C and moisture resistant to 100% RH, and can be cleaned by washing or vacuuming for reuse. Self-adhesive seal on mounting frame prevents dust and water from entering cabinet, and functional design of intake and exhaust fan hoods prevents direct infiltration of falling water and dust. Design also provides air channeling, which allows quiet operation.

This story is related to the following:
HVAC

Search for suppliers of: Filter Fans | Low Noise Fans

Non-Conductive Filter Frames offer quick-mount assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Sep 2008 07:45:16 -0500

Expanding one-piece assembly unit - filter, mounting bracket, fan guard, and air flow plenum - eliminates need to specify multiple parts to serve same function. Air filter media can be installed without complex kits and procedures, and design can be made to match existing hole pattern or provide captive fasteners and adhesive tapes. While metal finishes provide corrosion protection, filters with Quadrafoam media provide protection against flammability, UV light, and fungus.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Custom Air Filters | Filter Components

Dual Voltage Fan Trays provide thermal protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Sep 2008 07:36:10 -0500

Available in 3-, 6-, and 9-fan configurations with 115/230 V power cords and max airflows of 330, 660, and 990 cfm, respectively, Dual Voltage Fan Trays are suited for industrial and electronics cooling applications. Units feature heavy-duty steel construction with extruded aluminum side rails for protection in harsh environments. Offered in low-noise and high-speed versions, fans offer add-a-module feature that allows customer to increase or decrease airflow.

This story is related to the following:
HVAC

Search for suppliers of: Fan Trays | Electronic Equipment Cooling Fans

Baghouse Dust Collectors feature PowerCore filter packs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Sep 2008 07:34:19 -0500

Available in stand-alone and bin vent configurations, Torit PowerCore® dust collectors can capture both large and small dust particles in wood, grain, cement, and plastics manufacturing operations. Measuring 7 in. long and combining Ultra-Web® surface-loading technology with fluted-media design, single PowerCore filter pack can replace 6 traditional 8 ft long fabric filter bags and can be removed from clean side of collector with one hand in minutes without using tools.

This story is related to the following:
HVAC
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Dust Collectors | Dust Filtering Systems | Dust Collecting Filters | Dust Collecting Systems

Ductless Fume Hoods come in 36 in. deep models.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Sep 2008 07:34:08 -0500

Available in 3, 4, 5, and 6 ft wide folding-sash models, Ductless Fume Hoods utilize gas phase bonded carbon filter, which eliminates filter dusting and dead zones associated with granular carbon filters. Each unit uses microprocessor-based automatic safety controller, keeping constant check on airflow and filter quality, and alerting operator in event of filter saturation. Designed to meet and exceed OSHA and ANSI Z9.5 standards, polypropylene hoods house up to 7 in. of filtration.

This story is related to the following:
Laboratory and Research Supplies and Equipment
HVAC

Search for suppliers of: Laboratory Equipment & Supplies | Fume Hoods | Ductless Fume Hoods

Centrifugal Blowers feature dual inlet.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Sep 2008 07:40:36 -0500

Available in 11 sizes with drive outputs between 85 W to 3 kW, EC Centrifugal Blowers are suited for wide range of application, including compact air handling units, air curtains for doors and gates, fan coils, air heaters for factory buildings or as cooling fan for forced cooling of power converters, generators, or telecommunication systems. With integrated motor electronics, EC fans allow up to 3 airflow stages to be programmed in Constant Flow mode.

This story is related to the following:
HVAC

Search for suppliers of: Centrifugal Blowers | Air Curtain Fans | Air Handling Unit Fans | Centrifugal Fans | Cooling Fans | Custom Fans | Ventilating Exhaust Fans | Low Noise Fans

Centrifugal Fans feature 6 kW motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:19 -0500

Available in 7 different sizes, EC Series K3G310-K3G630 deliver airflows of 1,100-7,000 cfm with voltage input of 200/240 V or 380/480 V at 50/60 Hz. Units feature modular design consisting of noise-optimized motorized impeller and mounted square inlet nozzle with integrated pressure extraction point. Applications include commercial air conditioning, air handling units, packaged and split air conditioning systems, and fan coil units.

This story is related to the following:
HVAC

Search for suppliers of: Centrifugal Fans

HVAC Pumping System is fully integrated and self-contained.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:17 -0500

Supplied in thermally and acoustically insulated, weatherproof enclosure, Pumpbox incorporates pumps, IVS variable speed drives with sensorless in-built inverters, suction guides, triple duty valves, and controls. Positioning of components in enclosure minimizes footprint, while routine maintenance and major replacements are respectively made through side doors and roof. Self-contained, automatic control of pump speed ensures building demands are met with minimum energy requirement.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Pumping Systems | Industrial HVAC Equipment

Fan/Heatsink Assembly comes with 3 embedded heatpipes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:36 -0500

Combining forging and heatpipe technology, Model HS-008 fan/heatsink combo delivers 0.08ºC/W in compact 160 x 160 mm footprint. It has segmented high density fins that break down laminar flow layers periodically along flow path to increase turbulence. Suited for high power IGBTs, power converter modules, and high power laser sources, unit is available with 2 high power 60 mm fans, one fan duct, and one terminal block for connection to power supplies.

This story is related to the following:
Computer Hardware and Peripherals
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Fan Component Parts | Heatsink Assemblies

Panel Fan features direct drive capacities up to 57,000 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:20 -0500

Available in sizes ranging from 12-60 in., ADP Direct Drive Panel Fan features spark resistant cast aluminum airfoil axial impeller, aerodynamically efficient performance, factory set adjustable pitch blades, and heavy duty construction. Unit also features welded steel motor base and panel, TEFC industrial duty motor, and broad range of static pressures.

This story is related to the following:
HVAC

Search for suppliers of: Panel Fans | Direct Drive Fans

Fume Arms come in 1.5, 2.5, and 4.5 m lengths.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2008 08:07:45 -0500

Comprising of standard Speedlock components to facilitate quick replacement or addition of parts and assembly, industrial fume arms include built-in valve to allow users to adjust airflow for any application. It also features duct throttle valve, reducing cone, standard and modular ducting Lock Rings, and some Flex ducting. All brackets are external for unimpeded airflow through fume arm. Suited for vapor and fine powders, arms click into normal Eximo ducting ranging from 80-250 mm.

This story is related to the following:
HVAC
Mechanical Components and Assemblies

Search for suppliers of: Fume Collectors | Arms | Fume Extraction Systems

Hydraulic Dampers feature single or double acting design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:05 -0500

Offering 250,000+ cycle life, self-contained hydraulic dampers feature body diameters ranging from 15-40 mm, stroke lengths of up to 800 mm, and adjustable travel speed that remains constant throughout stroke. Variety of end fittings and mounting brackets are available for installation. Units are suited for medical, defense, packaging, bottling, printing, fitness equipment, transportation, lawn equipment, furniture, RV, and amusement industries.

This story is related to the following:
HVAC

Search for suppliers of: Hydraulic Recoil Dampers

Blower and Frequency Converter promote efficient operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:24 -0500

At 10.2 in. long x 3.8 in. dia, MONO compact blower supplies up to 32 cfm and generates static pressure of 0.72 psi. It fits tight spaces and operates at ambient temperatures up to 140°F. With brushless motor, system is maintenance-free and suited for continuous operation. Separately available, FC 550 frequency converter conserves energy by restricting blower to lower frequency and maintaining minimal air volume. Air volume can be adjusted with preset frequencies or remote control.

This story is related to the following:
HVAC
Test and Measuring Instruments

Search for suppliers of: Frequency Converters | Air Blowers

Air Purification Product reduces fan energy.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:31 -0500

Able to kill over 99% of airborne pathogens and capture allergens such as pollen, dander, and dust, StrionAir System A130 achieves LEED-qualifying MERV 13 efficiency at initial pressure drop of 0.2 in. water gauge. Electrically enhanced filtration technology keeps pressure drop lower through life of filter and also helps extend filter media life. Used for filtration in HVAC systems, product has modular design that can be configured to fit most air handlers.

This story is related to the following:
HVAC

Search for suppliers of: Air Purification Systems

Oil Mist Accumulator has no moving parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:46 -0500

Using expanded metal mesh in cone shape to catch excessive effluent and reduce amount of mist in air stream that reaches the collector, In-line Oil Mist Accumulator catches oils, coolants, and water mists from high-speed machine tools and parts washers. It fits into duct system directly, and has 2-piece construction that allows for easy disassembly and cleaning. Accumulator operates in vertical position, draining collected material back into machine sump.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Oil Mist Collectors | Air & Oil Accumulators

Plenum Fan features 12-bladed airfoil wheel.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:19 -0500

Available in both belt and direct drive versions, Model QEM is suitable for lower pressure supply or return air handling applications. Unit can be specified with wide range of accessories including inlet guards, protective cages, and isolators. Belt-drive Model QEM is licensed to bear AMCA Seal for sound and air performance.

This story is related to the following:
HVAC

Search for suppliers of: Airfoil Fans

Venting System offers lightweight and leak-proof connections.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:46:37 -0500

Suited for industrial building construction projects, NovaVent(TM) Sealed venting system features fully-sealed, gasket connection combined with precision-engineered, close-tolerance construction. Eliminating need for field-welded joints, Double Fail Safe(TM) gaskets offer installers safe way to build venting system on-site. Available in 3-24 in. dia, system also features single-wall version that is only metallic venting system that can be cut to length in field.

This story is related to the following:
HVAC

Search for suppliers of: Air Vents | Wall Vents