ThomasNet Industrial Newsroom -

Blown Film Air Coolers are available in 600-7,500 cfm sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Oct 2008 07:33:35 -0500

Facilitating accurate air ring process control, BFC Series Blown Film Air Coolers eliminate production variables in air ring supply, including air temperature, pressure, and volume. They feature powder coated, heavy gauge steel cabinet designed for 35 in. static pressure, non-corrosive wetted surfaces, permanent cleanable filter, bolt-on adjustable legs, and condensate trap. Units are suited for use in warmer climates or other environments where ambient air temperatures rise during summer.

This story is related to the following:
HVAC

Search for suppliers of: Air Coolers | Air Cooled Chillers | Cooling Systems

Cooling System addresses needs of server rooms.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Sep 2008 07:36:35 -0500

Designed for installation within row of racks, 300 mm direct expansion APC InRow RD provides scalable solution to add cooling as demand increases, up to 10 kW. Including variable speed fans, it captures hot exhaust air directly from aisle and distributes cool air through front of unit to ensure that temperatures are held at setpoint conditions. System is controlled by micropocessor through 4-line alphanumeric display and managed centrally through APC InfraStruXure Manager.

This story is related to the following:
HVAC

Search for suppliers of: Cooling Systems | Computer Room Air Conditioners

Server Cooling System offers flexible climate control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Sep 2008 07:44:33 -0500

Able to be retrofitted into mixed server architectures without modifying server racks, LCP Inline delivers cooling output of 30 kW and is suitable for configurations without raised floor. Monitoring functions, included, enable complete integration within data center monitoring environment. At 300 mm wide, unit can be installed inside server rack rows and offers max air flow rate of 4,600 m3/h with even air distribution. Network-capable system controller ensures optimal cool air flow.

This story is related to the following:
HVAC

Search for suppliers of: Electronics Air Conditioning | Electronics Cabinet Cooling Air Conditioners | Electronic Equipment Coolers

Auxiliary Air Conditioner is designed for day cabs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:20 -0500

Based on split-system HVAC technology, 7,000 Btu day-cab air conditioning system consists of compressor/evaporator/blower unit that fits between seats and ruggedized external condensing unit that mounts on back of cab or under the truck, and provides 2 hr of cooling without running truck's engine. It uses bank of Group 31 absorbed glass mat (AGM) batteries, which replaces truck's existing batteries. System emits no exhaust and fully complies with CARB regulations.

This story is related to the following:
HVAC

Search for suppliers of: Automotive Air Conditioners

Airline Cooling System is lightweight and portable.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:38 -0500

Weighing only 28 lb without ice and featuring rugged 70 quart MaxCold Igloo Cooler with durable wheels and locking telescope pull handle, AllegroAir (LP) Airline Cooling System is capable of reducing air temperature from 180°F to as low as 50°F. Suitable for jobs in the field, compact unit can be used with 1-, 2-, or 3-worker Ambient Air Pump. Inlet air is connected to cooling system from Ambient Air Pump through 5 ft long inlet supply airline.

This story is related to the following:
HVAC

Search for suppliers of: Portable Cooling Systems | Air Coolers

CPCI Cooling Card features 12 fan installation positions.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:39:46 -0500

Meeting cPCI cooling needs, Model cPCI-6U-COOL allows up to 12 fans to be installed, helps add spot cooling to cPCI system, eliminates overheating components, and accommodates upgraded systems without enough airflow. Each fan can be pointed forward, or to rear to provide direct cooling of components, and low profile fans fit within 1 cPCI slot. Features include 5 and 12 V options, 3.7 or 8 cfm per fan, and 3.7 cfm with low profile zero slot fans.

This story is related to the following:
Computer Hardware and Peripherals
HVAC

Search for suppliers of: Cooling Systems | Compact Peripheral Component Interconnect (CPCI) Chassis

Central Cooling Plants have pre-engineered, modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:49 -0500

Pre-assembled to facilitate installation, modular central plants are suited for new construction and expansion projects where fast-track completion schedules or minimal interruption to cooling are priorities. Solutions combine water-cooled chiller with pumps, cooling tower, and interconnected piping. Chiller models include screw, scroll, centrifugal, or magnetic bearing compressor, depending on requirements, while cooling tower includes VFD as standard. Sizes range from 100-600 tons.

This story is related to the following:
HVAC

Search for suppliers of: Cooling Towers | Cooling Systems | Water Cooled Chillers

Modular Cooling System helps organize samples in labs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:11:31 -0500

Ensuring that each sample is kept at precise, controlled, and constant temperature all day, CoolSystem(TM) helps organize sample tubes during heating or cooling procedures in labs and clinics. Portable cooling system works with any temperature media including ice, dry ice, and liquid nitrogen. ThermalTray gives temperature-constant platform for variety of tube and plate modules that never sink into ice or water bath, eliminating floating, lost, or contaminated sample tubes.

This story is related to the following:
HVAC
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Cooling Systems | Laboratory Equipment & Supplies

Chillers provide up to 2,900 W/9.889 Btu/hr of heat removal.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:57 -0500

Designed for laser etching, engraving, and marking systems , PolyScience 5000 and 6000 Series recirculating chillers maintain process temperatures from -10 to up to +70°C with ±0.1°C stability. Available with ¼ to 1 hp compressors, they feature temperature and pressure/flow rate digital readouts, one-touch temperature control, ambient temperature tracking, and integral temperature, pressure, and flow alarms. Units can be equipped with centrifugal, positive displacement, or turbine pumps.

This story is related to the following:
HVAC
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Laser Chillers | Portable Chillers | Recirculating Chillers | Laser Cooling Systems

Cooling Element protects pressure gauges.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:32 -0500

Under laboratory test conditions, Sta-Kool(TM) 316L SS Cooling Element can reduce 400°F liquid process temperatures to 100°F at active portion of Bourdon tube. Unit has max operating temperature of 750°F at 3,500 psi and max operating pressure of 5,000 psi at 100°F. Element can be threaded or welded to any pressure gauge with ½ in. NPT male connection made from compatible material. It can also be attached in between pressure gauge and diaphragm seal for most comprehensive protection.

This story is related to the following:
HVAC

Search for suppliers of: Electronic Component Cooling Systems

Web Cooling Process System minimizes cleaning maintenance.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:38 -0500

Designed for web offset presses, Ironman(TM) Integral Web Cooling Process System eliminates condensate on chill rolls, marking on downstream rollers, and smoke in pressroom. System is available in web widths for 16-96 page presses in single and double-web configurations for printing speeds up to 3,550 fpm. Replacing tilt-box design web guides downstream, L-wrap roller turns horizontal web downwards by 90° angle. Silicone application unit seals both sides of web and increases web moisture.

This story is related to the following:
HVAC
Printing and Duplicating Equipment

Search for suppliers of: Printing Presses | Electronic Component Cooling Systems

Commercial A/C Series minimizes energy consumption, noise.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:45:05 -0500

MULTI V(TM) air conditioners uses Variable Refrigerant Flow heat recovery system that makes it possible to operate cooling and heating simultaneously using one outdoor unit. Instead of shutting off once desired temperature is reached, inverter compressor continues to operate at low speed to maintain that temperature; constant speed compressor is utilized only when overall capacity of system needs to be increased. Indoor and outdoor units offer BTU levels from 38,000-192,000.

This story is related to the following:
HVAC

Search for suppliers of: Air Conditioners

Enclosure Cooling System delivers 2-stage protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Jun 2008 07:27:37 -0500

Only requiring compressed air supply for operation, Vortex A/C(TM) installs on electrical control panels in environments up to 175°F to maintain enclosure temperatures within 80 to 90°F range. UL-listed cooling system, rated at 5,000 BTUH, features dual vortex tube cooling units that each have mechanical thermostat. First stage offers 2,500 BTUH cooling capacity and, if needed, second stage activates to double supply of refrigerated air to enclosure.

This story is related to the following:
HVAC

Search for suppliers of: Electronic Equipment Coolers | Compressed Air Coolers | Electronics Cabinet Cooling Air Conditioners

Air Conditioners suit space-limited applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Apr 2008 07:44:06 -0500

Built to address hazardous industrial environments with limited wall space, STALLION Series air conditioner units come in general-purpose and classified models with or without purge. Ultra-compact units are offered in 2-10 ton cooling capacities, are stackable, rackable, and redundant.

This story is related to the following:
HVAC

Search for suppliers of: Air Conditioning Units | Air Conditioner Units | Hazardous Duty Air Conditioners | Air Conditioners

Auxillary Air Conditioning System is designed for day cabs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:24 -0500

Developed as solution to reduce idling while waiting to load and unload at terminals, CARB-compliant, 7,000 BTU auxiliary air conditioning system provides 2 hr of cooling on battery power. It utilizes bank of Group 31 absorbed glass mat batteries and emits no exhaust. System consists of compressor/evaporator/blower unit that fits between seats, external condensing unit that mounts on back of cab or under truck, and inside unit with molded composite cover for protection and noise control.

This story is related to the following:
HVAC

Search for suppliers of: HVAC Systems

Panel Mount Air Conditioners are NEMA 4/4X-rated.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Mar 2008 07:36:54 -0500

Profile Guardian Series DP33, DP43, and DP47 Panel Mounted Air Conditioners are designed to cool interior of electronic cabinets. With capacities ranging from 5,000-9,000 BTU/H, they are suited for indoor and outdoor applications. Products feature epoxy-coated condenser coils and painted galvanized sheet metal and can be used in Food and Beverage processing plants, where Government Clean-in-Place (CIP) procedures require routine high-pressure washdowns.

This story is related to the following:
HVAC

Search for suppliers of: Electronics Cabinet Cooling Air Conditioners

Spot Cooling System provides 60,000 ETL-Verified BTU/hr.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Mar 2008 07:35:44 -0500

Designed to cool large spaces, Office Pro 63 3-Phase system is suited for heat-sensitive servers and telecom equipment rooms. It features programmable digital controller for automatic operation after-hours and on weekends, and condensate pump kit that supports continuous operation. Equipped with 2-speed fan to control airflow, system offers 208, 230, and 460 V for 5 ton cooling units.

This story is related to the following:
HVAC

Search for suppliers of: Spot Cooling Systems

Cooling System offers capacities up to 105 kW.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jan 2008 07:08:44 -0500

Available in nominal ratings of 53, 70, 77, and 105 kW, upflow Liebert DS supports applications that require cooling from top of unit in data centers or telecommunications environments that do not have raised floor. Digital scroll compressors allow unit capacities to adapt to changing room conditions as small as ±1°F and ±1% RH. Providing diagnostic and maintenance support, Liebert iCOM(TM) control system enables multiple units to communicate and work together.

This story is related to the following:
Computer Hardware and Peripherals
HVAC

Search for suppliers of: Cooling Systems | Electronic Component Cooling Devices

High-Pressure Coolant System optimizes chip control.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jan 2008 07:08:14 -0500

CoroTurn® HP combines with Coromant Capto® to harness capability of up to 1,100 psi in turning centers, vertical turning lathes, and multitask machines. Via turret or spindle, Capto coupling channels high-pressure coolant jet through small nozzles mounted close to insert cutting edge. Resulting velocity of coolant jet produces hydraulic wedge that lifts chip from material, reducing temperature and providing chip control.

This story is related to the following:
HVAC

Compressor Chiller is available from 30-180 tons.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Oct 2007 07:35:38 -0500

McQuay air-cooled scroll compressor chiller is available with R-410A refrigerant that is chlorine-free and has no ozone depletion potential. With up to 10.3 EER at full load and up to 14.7 EER at part load, chiller meets or exceeds ASHRAE Standard 90.1 for energy efficiency. McQuay Open Choices(TM) feature allows MicroTech II® controls to integrate into building automation systems using open, standard protocols such as LonTalk®, BACnet® or Modbus®.

This story is related to the following:
HVAC

Search for suppliers of: Air Cooled Chillers | Cooling Systems