ThomasNet Industrial Newsroom -

Bellows Seal Globe Valve is designed for steam service.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Nov 2004 07:57:40 -0600

Compact BE3L features zero leak, triple seal construction, where bellows, gland packing, and stem seal act as impermeable barrier between fluid and environment. Forged steel construction and stainless steel bellows are tested to withstand 10,000 cycles, and tight shutoff is accomplished via stellite hardened surfaces on valve plug and seat. Available in ½-2 in. sizes in screwed, socket weld, and 300 lb RF, design is rated to 710 psig and 752°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Globe Valves | Bellows Seal Valves

Globe Control Valve features high capacity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Apr 2004 08:13:31 -0600

Mark 100 provides 15% higher average flow capacity over conventional valves in sizes 6-16 in. and pressure classes 150-600. Top-entry clamped seats and integral body stand allow easy maintenance and reduce critical downtime. Available with full range of noise and cavitation reduction severe-service trims, valve can be used in chemical manufacturing, oil and gas production, and power generation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Flow Control Valves | Globe Valves

Valve provides severe service flow control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Dec 2003 07:37:59 -0600

Multi-Z boiler feed-pump, recirculation control valve handles high-pressure drop applications where entrained solids and cavitation are a problem. Multistage trim design eliminates cavitation and provides extended trim life. Venturi outlet nozzle offer further trim and seat protection from high velocity, cavitation, and flashing, and linear multistage plug provides high throttling resolution.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Custom Valves suit chemical and nuclear industries.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2003 07:12:33 -0600

Valve types include slide, double slab gate, gate, ball, plug, glob, piston, tank bottom, sampling, injection, rinsing, and butterfly valves. They are offered as manual or automatic, pneumatic, electric, and hydraulic, in sizes ½â�"48 in., with pressure classes from ISO PN 10â�"420. Valves can be manufactured from carbon steel, austenitic and super austenitic stainless steel, duplex steel, nickel and nickel alloys, and alloys such as titanium, zirconium, and tantalum.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Pneumatic Valves | Nuclear Valves | Hydraulic Valves | Automated or Automatic Valves | Custom Valves | Nuclear Power Ball Valves | Butterfly Nuclear Power Valves | Nuclear Power Gate Valves | Nuclear Power Globe Valves

Thermoplastic Valve suits critical applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Feb 2003 07:40:02 -0600

Based on globe-style flow pattern with direct operation of valve shaft, air-actuated Series ASO can be operated pneumatically or hydraulically to provide positive, bubble-tight shut-off. Design incorporates clear, acrylic upper housing and heavy-duty spring and is available in 5 types of operation. Valve shaft, machined of solid Teflon®, eliminates sticking, while Fail-Dry® safety feature provides warning of primary seal failure while valve is still 100% operable.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Air Operated Valves | Globe Valves | Thermoplastic Valves

Globe Valve is actuated by heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Dec 2002 07:53:35 -0600

FIRE-CIDE® Valve is operated by external lever, which provides manual lifting action to piston through rotary shaft seal, ensuring fail-safe return. Valve is reset manually, held open by fusible link, and trips closed when link melts. It conforms to OSHA requirements for heat actuated valves on withdrawl lines of indoor tanks containing flammable or combustible fluids. Sizes range from ½-4 in. with threaded or flanged end connections.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Globe Valves

Globe Valve has zero-leakage design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Aug 2002 10:09:44 -0600

Series 5080 Manual Globe Valve offers pressure range of 0 to 6,000 psi and can be used in metering, throttling, or full open or closed operation. Encapsulated plastic seat protects against wire drawing. Teflon seat and 316 stainless steel body assure compatibility with most gases and liquids. Sizes are 3/4 and 1 in., with Cv of 3.79 and NPT or MS33649 tube connections. Ambient and cryogenic designs are offered for temperatures ranging from -420 to +450°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Globe Valves

Control Valves come in various configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Mar 2002 14:04:21 -0600

Mark 78 globe style valves are available with integral flanges in sizes from 1-1/2 in. up through 4 in. Cage-guided and sliding gate valves are also available. All can be used in wide range of operating conditions including process, steam and difficult service.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Control Valves | Globe Valves