ThomasNet Industrial Newsroom -

Switching Ball Valves operate up to 6,000 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Dec 2008 07:46:45 -0600

Housed in bottom-ported, 3.20 x 1.25 x 2.5 in. package, 3-way Compact Switching Ball Valves feature 3/16 in. port size, 1/8 or ¼ in. FNPT connections, and panel mounting via 13/16-7/8 in. diameter hole. Units deliver bi-directional flow and have blow-out proof stem for safety. Rated per MSS SP-99 and marked per MSS SP-25, units can be constructed to satisfy NACE requirements for corrosion resistance. Body and adapters are 316 stainless steel, and all seats and seals are replaceable.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Stainless Steel Ball Valves

Ball Valves feature blow-out proof stem.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Nov 2008 07:14:32 -0600

With floating ball design that facilitates low-torque operation, API 3000 and 6000 Class Ball Valves have max working pressure of 6,000 psi (per API 598) with 0.38-1.50 in. port sizes. Units come in selection of tube, pipe, and flanged end connections, and can be constructed to satisfy NACE MR-01-75 specifications for corrosion protection. Body and end flanges are available in stainless steel and duplex steel, while seals come with PEEK seats for chemical, heat, and wear resistance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Floating Ball Valves | High Pressure Ball Valves | Instrumentation Ball Valves | Stainless Steel Ball Valves

Valves suit chemical, water, and wastewater applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Oct 2008 07:36:28 -0600

Featuring rugged, all-plastic design, and 150 psi pressure rating, QVC and QTA Series of industrial compact ball valves are designed for OEM applications. Model QVC Series comes in ½-4 in. sizes in gray or white PVC. Including socket and threaded True Union end connections, QTA Series valves are available in ½-2 in. sizes in gray or white PVC.

This story is related to the following:
Waste Handling Equipment
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Plastic Ball Valves | Water Valves | Wastewater Valves

Compact Ball Valves feature all-plastic design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Oct 2008 07:54:32 -0600

Suited for heavy-duty chemical, water, and wastewater applications, QVC and QTA Series feature socket or threaded pipe connectors, Santoprene (TPV) seats, full porting, and 150 psi pressure rating. QVC Series is offered in ½-4 in. sizes in gray or white PVC, while QTA Series comes in ½-2 in. sizes in gray or white PVC and includes socket and threaded True Union end connections. Both series, designed to fit into space-restricted areas, offer quarter-turn operation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Plastic Ball Valves

Double Block and Bleed Valves offer low-torque operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 03 Oct 2008 07:40:10 -0600

Rated for use with working pressures from 10,000 or 15,000 psi, IPT Double Block and Bleed Valves feature Trunnion Ball design, are available with clamp-hub type ends to meet API 17D specifications, and can be constructed to satisfy NACE MR-01-75 for corrosion protection. Units have body and end flanges made from SS, duplex steel, and super duplex, while seals feature PEEK seats and Viton O-rings to enable reliable operation in temperatures ranging from 0-400°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Corrosion Resistant Valves | Double Block & Bleed Valves | High Pressure Valves | Stainless Steel Valves | High Pressure Ball Valves | Stainless Steel Ball Valves | Custom Valves

Ball Valve features stainless steel thumb grip T-handle.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:46 -0600

Available in sizes from ¼-1¼ in., Model 759TS offers working pressures of 50 psi WSP and 600 psi non-shock WOG. Valve is constructed with full port, forged brass, 2-piece body; Teflon seats; blow-out proof stem; and chrome-plated solid brass ball. Conforming to MSS-SP-110 and ANSI B2.1 for threaded ends, Model 759TS is suited for underground and close quarter commercial and light industrial applications with steam, water, oil, gas, or air.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Brass Ball Valves

Plastic Ball Valves suit medium-duty applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:35:11 -0600

Designed for medium-duty industrial and commercial applications, Series TBV Plastic Ball Valves feature true union design, allowing for removal from piping system without breaking down connections. Units have all plastic construction and do not rust or corrode. They are contained in PVC plastic bodies with EPDM seals and are available in 2½-4 in. sizes, featuring full-port design.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Plastic Ball Valves

Ball and Needle Valves offer high-pressure fluid control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2008 07:38:54 -0600

Suited for applications up to 20,000 psi, 20K Hi-Pro Ball Valve and 20K H-Series Needle Valve are fabricated from 316 SS and offered in NACE-compliant and Heat Code Traceable versions. Ball valve features 2-piece construction, minimizing potential leak paths. Unit is fully bi-directional and actuated by 90° turn. Offering multi-turn action, needle valve operates from -65 to +392°F. Both instrumentation valves are available with Phastite® tube connector ends, which minimize assembly time.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Flow Control Valves | Needle Valves | Stainless Steel Ball Valves | Instrumentation Ball Valves | High Pressure Ball Valves

True Union Ball Valve handles aggressive media.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Feb 2008 07:25:17 -0600

Operated as manual valve or paired with pneumatic or electric actuator, Halar® Ball Valve allows for flow and pressure in either direction and eliminates stress inherent to ball secured only at top. Corrosion-resistant thermoplastic material handles high concentration of sodium hypochlorite and 98+% sulfuric acid. It also has broad use temperature range from cryogenic to 300°F. Available in ½-1 in. sizes, valve features blow-out proof design.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Ball Valves | Plastic Ball Valves

Check Valves are available in 3, 4, and 6 in. sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:49 -0600

Designed for wastewater and storm water pump applications, Model 4082 Ductile Iron Ball Check Valve meets AWWA C508 check valve flanged to flanged lay lengths. It features 100% fusion bonded epoxy coating applied to body and access port. Available in sizes from 1-4 in., Ball Checks Valves 208, 408, and 508 are manufactured in Cast Iron, Ductile Iron, 316 Stainless Steel, and PVC. Valves are flow efficient and maintenance-free.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: American Water Works Association (AWWA) Specification Valves | Stainless Steel Ball Valves | Cast Iron Valves | Stainless Steel Check Valves | Ductile Iron Valves | Ball Type Check Valves | Water Valves

Ball Valves suit chemical and wastewater applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jan 2008 07:37:40 -0600

Designed for manual on/off service of process pipelines, Series TBV2 features PVC or CPVC plastic bodies with EPDM or FPM O-rings for wide range of chemical compatibility. True union valves have full port design and are available in sizes from ½-4 in. Units incorporate double O-ring seal and threaded seal retainer that allows for seat adjustment. Most sizes come with both NPT and socket end connections.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Plastic Ball Valves

Multiport Ball Valve can offer multiple flow paths.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Dec 2007 07:50:19 -0600

Offered in sizes from ½-2 in., 3-way Type 23 Multiport ball valve is available with Cross Port Ball. Molded flow corridor inside ball cavity allows for separate L-port flow pattern in valve that also has Straight Through flow pattern. Able to be configured to allow for L-Port, T-Port, and Straight Through flow patterns in one valve body, design lets operators switch between all 3 options by rotating valve handle.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Ball Valves

Ball Valves feature zero leakage design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Sep 2007 07:52:07 -0600

Available in ½-4 in. top entry sizes, Camseal® N-stamped, metal-seated ball valves feature pressure ratings from ASME Class 900 to 4500. Units are capable of meeting zero bubbles for 4 min at 50 psi and 1,000 psi nitrogen. Modular internals isolate critical seal surfaces from thermal effects, while Integral Gland Wrench concentrically loads stem packing without tools. Flame spray chrome carbide coating provides leak-free performance, even in high temperature drop applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Metal Seated Ball Valves

Ball Valves offer positive, quarter-turn shutoff.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Aug 2007 07:45:45 -0600

Featuring 316 SS construction, multipurpose SK Series is available in ¼ in., 3/8 in., 6 mm, and 8 mm sizes. Spring-loaded seats and floating ball provide leak-tight integrity in both low- and high-pressure systems while minimizing wear. In addition to manual actuation, valves are offered with standard Swagelok or ISO 5211-compliant rack-and-pinion pneumatic actuators. Valves are rated for working pressures to 6,000 psig and temperatures from -40 to 302°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Welding Equipment and Supplies

Search for suppliers of: Shut-Off Valves | Pneumatic Valves | Stainless Steel Ball Valves

V-Port Ball Valves deliver consistent flow control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Jun 2007 07:44:46 -0600

Available with 30, 60, or 90° notch, TRIAC V Series is available in ½-4 in. 3-piece threaded models, 1-6 in. 150 No. flanged versions, and 316 SS or WCB trim. Control ports are cast and machined into ball for optimized flow. All models feature seat made of 50% stainless steel powder in 50% PTFE matrix, and 45° pyramidal stem seal with Belleville washers and Chevron packing for protection against stem leaks.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Flow Control Valves | Ball Valves

Three Way Valves are offered in brass or stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 May 2007 08:46:54 -0600

Four seated, 3-way ball valves come in L and T port designs, offer 14 flow path options, and allow any port to be used as entry. Brass models have low torque design, are rated to 400 psi, and come in sizes from ¼-3 in. Stainless steel models are rated to 1,000 psi and come in sizes ¼-2 in., in standard and full port options. All L and T port 3-way valves are ISO direct mount style for compact automation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Stainless Steel Ball Valves | Brass Ball Valves | Ball Valves

Oil/Gas Valves feature explosionproof design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Apr 2007 07:46:30 -0600

Series A-T liquid and gas shut off valve assemblies are fitted with spring-return automated ball valve, explosionproof limit switch, and solenoid pilot valve. Quarter turn rack-and-pinion actuator design and stem seal system provide shut off capability for the FM class 7400, 7420, and 7422 approved valves. Valves are available 3-piece or flanged models with manual or auto shut-off, 316SS or WCB trim, in 1/4 to 6 in. sizes, with choice of threaded, socket, and butt weld connections.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Ball Valves | Explosion Proof Valves | Gas Shut-Off Valves | Automatic Safety Shut-Off Valves

Flanged Ball Valves feature fire-tested design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Mar 2007 07:55:18 -0600

Offered in full- or standard-port models, 4000 Series comes with carbon steel or stainless steel body, and 316 SS ball and stem. Units feature ISO 5211 direct mounting with adjustable packing, and can be equipped with manual handle or direct mount pneumatic or electric actuator. Fire-tested to API607 4th Edition and ISO 10497, valves meet stringent requirements of refinery, petrochemical, chemical process, process control, water and waste, and pipeline applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Ball Valves

Sanitary Ball Valves feature electric or pneumatic actuator.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Jan 2007 07:25:54 -0600

Designed to meet 3A sanitary standards, 3-piece automated Series BV3-3A features sanitary connection ends for line removal. Cavity filled and full bore designs minimize product entrapment and provide consistent flow. Powered by 115 Vac supply, electrically actuated models have weatherproof NEMA 4 enclosure and are available in 2-position or proportional control models. Pneumatic double-acting actuators have 2 air supply ports with 1 driving valve open and 1 driving valve closed.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Sanitary Ball Valves | Automated Ball Valves

Control Valves handle critical throttling conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Dec 2006 07:46:41 -0600

Featuring floating ball design, bi-directional Worcester CPT Series characterized seat control valves can be used in systems that control steam pressure or pH levels, operate in low temperature cryogenic conditions or up to 1,000°F, and meet EPA and OSHA specifications for containing toxic chemicals. Seat is self-lubricated, full-contact sintered stainless steel, impregnated with TFE or graphite. It provides positive shutoff and eliminates galling when paired with hard-coated ball.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Ball Valves | Control Pressure Valves | Control Valves