ThomasNet Industrial Newsroom -

Mobile Plunger Pumps handle sludge material where needed.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Dec 2008 07:46:42 -0600

Capable of transferring up to 18% solids at 500 gpm, HPX plunger pumps feature 160,000 psi tensile strength shafts, biodiesel-capable Yanmar diesel engines, and plunger-pac leak prevention packing system. They are available in simplex (one plunger) or duplex (dual plunger), as well as skid mounted or trailer mounted models. Plungers can be coated with abrasion resistant compounds for pumping select corrosive fluids.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Transfer Pumps | Sewage Pumps | Portable Pumps | Plunger Pumps

Sump Pumps incorporate interchangeable parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Nov 2008 07:41:24 -0600

Model VRS vertical rubber-lined sump pumps feature interchangeable wet end parts with SRL pumps, including liners, impellers, and casing halves. User can replace liners without changing pump casings. Large-diameter, open impellers pass solids and resist air binding, while heavy-duty power ends and shafts limit impeller deflection. Available in 4 different diameters and 4 or 6 ft lengths, pumps handle duties with up to 120 ft head, solids up to ¼ in., and pressure up to 75 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Vertical Pumps | Sump Pumps | Rubber Lined Pumps

Piston Pumps feature pneumatic top-head drive motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Nov 2008 07:53:57 -0600

Offering weather-resistant design, Vector Piston Pumps include speed control mufflers located on driver's side frame, making maintenance safe for field personnel. Design eliminates fugitive exhaust emission and associated odor problems since driver air never contacts liquid being pumped. Installed at any angle from 0-90°, pumps include fluidic switch that controls pump speed, so liquid is pumped at controlled rate, minimizing risk of overpumping, silting, and clogging.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Piston Pumps

Waterjet Pump can produce pressures in excess of 90,000 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Nov 2008 07:14:44 -0600

With support for 75,000 psi continuous operating pressure, 100 hp X-Stream xP90-100 waterjet intensifier pump is capable of producing flow rates of 1.45 gpm. Pump reduces taper by up to 0.001 in., and supports up to .017 in. orifice. Its fittings and tubing are rated for 100 KSI.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: High Pressure Pumps | Hydraulic Pumps | Water Pumps

Diaphragm Process Pump is optimized for flow rate.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Nov 2008 07:14:14 -0600

Offering oil-free operation without risk of medium contamination, Type N0150 electrically operated diaphragm pumps achieve flow rates to 300 Lpm, max vacuums to 29.3 in. Hg, and max pressure to 30 psig. They can be equipped with double diaphragm system for increased safety and customized to meet application requirements. Standard features include cast aluminum compressor housing, heavy-duty motor with sealed ball bearings, and leak rates from 6 x 10-3 to 6 x 10-6 mbar l/s.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Process Pumps | Diaphragm Pumps

Vacuum Pump promotes material handling efficiency.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Nov 2008 07:42:04 -0600

Able to optimize and enhance automated product handling processes in secondary manufacturing in packaging line of consumer goods, P5010 features COAX® 3-stage cartridge technology, 2 base pumps, and aluminum interfaces. Modular design minimizes changeover time while promoting customization and optimization opportunities for vacuum performance, function, and interface. Optional air-saving function minimizes compressed air usage in handling of non-porous products.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps

Dispensing System transfers multiple liquids simultaneously.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Nov 2008 07:43:16 -0600

Designed for spill-free, environmentally safe transfer of virtually any chemical or liquid, GT Multi-Pump Dispensing System allows simultaneous multiple-liquid transfer stations of GoatThroat pumps to operate from single shop line with 2-4 psi. Since pumps pose no sparking hazard, they are suited to environments where electric pumps cannot be used but multiple liquids are needed. Pumps meet RoHS and US FDA food safe requirements.

This story is related to the following:
Material Handling and Storage Sponsored by: Asymtek - Newsletter Ad
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Dispensing Systems | Liquid Dispensers | Drum Dispensers | Chemical Dispensers | Liquid Pumps | Drum Pumps | Chemical Transfer Pumps

Compact Centrifugal Pumps feature built in drive circuit.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Oct 2008 07:47:00 -0600

Available in hose barb and threaded connections, Models RD-12 and RD-12Z provide external flow adjustment feature via 1-5 Vdc third wire input. Classified as safety voltage (50 V or under), they allow users to comply with CSA, UL, CE, and GS standards. With sound levels as low as 40 dB, pumps are suited for OEM applications, including small chiller/circulator systems, as well as for electronics cooling, servers, power supplies, fuel cell recirculation, and laboratory equipment.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Centrifugal Pumps | OEM Pumps

DC Pump targets automotive applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Oct 2008 07:44:47 -0600

Weighing 5.1 lb, 309 Series WOB-L DC Pump and Compressor is manufactured with corrosion-resistant materials on inside and corrosion-resistant treatment on external components. Unit features oil-less operation, die-cast aluminum components, steel mounting brackets and isolators, all wetted aluminum parts, and stainless steel inlet valve. Providing up to 26.75 in. Hg and 160 psi of maximum intermittent pressure, 309 Series meets radiated emission requirements and is RoHS compliant.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Automotive Pumps | Corrosion Resistant Pumps | DC Electric Pumps

Sump Pumps feature energy-efficient design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Oct 2008 07:43:55 -0600

Comprised of ½ hp BWT050 and ¾ hp BWT075, respectively capable of pumping up to 2,770 and 3,630 gph, Green Line series of Basement Watchdog sump pumps has Dual Float Switch featuring 2 floats mounted in protective cage. Should one float fail to operate, second float automatically activates pump. Standard Dual Float Controller, also included, activates pump when water lifts float switch. Once float returns to original position, pump runs for 10 sec to completely empty sump pit.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Sump Pumps | Submersible Pumps

Oil-Free Vacuum Pump has compact and lightweight design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 03 Oct 2008 07:40:04 -0600

Providing vacuum and pressure in one unit, Rocker 400 features aluminum die-cast construction, has directly motor driven design, and rubber feet that keep noise level at 50 dB. Maximum pressure and vacuum ratings are 80 psi and 25 in. Hg, respectively, and flow rates are supported from 0.17-1.31 cfm. Designed for use with flask filtration and vacuum manifold applications, this 1/6 hp piston powered vacuum pump can also be used for positive pressure filtration.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Oil-Free Pumps

Bar Pump handles waterjet pressure up to 90,000 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Oct 2008 07:36:21 -0600

Produced with just one intensifier, Streamline(TM) PRO UHP pump features threaded, stud design that utilizes hydraulic tension for ease of maintenance, and is also downward compatible to 60,000 psi operational pressure when less waterjet force is needed to complete any project. Unit has multiple language controls, dual pressure compensator, and remote access software. Meeting ISO 9001:2000 standards, it is suited for just-in-time production schedules.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Jet Pumps | Waterjet Intensifier Pumps | Hydraulic Pumps | OEM Pumps | Ultra High Pressure Pumps

Dosing Pump features self-priming height of 1.5 m.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Sep 2008 07:42:55 -0600

With 4 versions and large variety of liquid ends available, Roytronic® is mechanically actuated diaphragm electromagnetic pumping system for chemical products, fluorinated products, and amines. IP65 resistant product offers thick wall IXEF reinforced thermoplastic construction and integrated metal-plastic structural and magnetic components. Features include 12.1 Lph maximum output, 17.3 bar maximum pressure, 50°C maximum temperature of pumped chemical, and accuracy ±2% of adjusted output.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Diaphragm Pumps | Dosing Pumps

Peristaltic Pumps optimize flow per compression.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Sep 2008 07:42:38 -0600

Able to handle abrasive, corrosive, viscous, or crystallizing media and slurries with high solid content, LPP-T32 and LPP-T50 feature rolling design that eliminates friction, maximizes hose life, and lowers energy consumption. Roller is mounted on crankshaft, creating eccentric rotation during 360° operating cycle. Pumps are also equipped with in-line pipe connections, optional hose leak detection unit, and adjustment mechanism that senses hose wear when compression is readjusted.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Peristaltic Pumps

Cooling Units, Heat Pumps create comfortable environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Sep 2008 07:39:48 -0600

Available in MSY/MUY cooling only and MSZ/MUZ heat pump systems, Mr. Slim® M-Series D30/36NA provide optimal horizontal air distribution with capacities from 30,000-36,000 Btu/h. Heat pump systems feature hot-start technology for instantaneous warmth, while indoor cooling units use multi-part filter system to remove contaminants during circulation. Operating at noise levels down to 32 db(A), systems have auto restart feature, wireless remote control, and self-check function.

This story is related to the following:
HVAC
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Heat Pumps | Cooling System Pumps

Shear Pumps can be cleaned and sanitized in place.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Sep 2008 07:25:29 -0600

Targeting food and beverage industry, ShearFX Series features 4 different models ranging from 10-75 hp with capacities up to 250 gpm. Multiple tooling styles are available, allowing balance between shear energy and pumping efficiency. Design of pump and tooling offer ease of installation and maintenance while meeting stringent hygienic standards for being CIP-able and SIP-able. Various other options are available including selection of motors, controls, and portable bases.

This story is related to the following:
Food Processing and Preparation
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Homogenizers | Shear Pumps

Vacuum Generators are available in various configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Sep 2008 08:09:06 -0600

Designed for pick and place, clamping, lifting, chucking, and surface mounting applications, E-Vac(TM) series of compressed air powered vacuum generators have single stage design that provides consistent, steady vacuum without fluctuations. Low vacuum units up to 21 in. Hg generate more airflow to overcome porosity and leakage when used with porous materials, such as cardboard, while high vacuum units up to 27 in. Hg suit non-porous materials such as glass, steel sheet, and plastic.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Vacuum Pumps | Vacuum Generators

Precision Handheld Pumps come in 4 models.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:31 -0600

Featuring dual O-rings on all pistons for smooth operation with zero leakage, HPP-100 and HPP-VAC are designed for 0-100 psi or 0-028 in Hg vacuum. Model HPP-600 pneumatic pump can generate both vacuum and pressure and covers range from 28 in.Hg vacuum to 600 psi pressure. Compatible with most hydraulic fluids, oils, and water, HPP-10K hydraulic pump can generate pressure from 0-10,000 psi. Units are suited for automotive, chemical, and petroleum industries.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Automotive Pumps | Chemical Pumps | Leakproof Pumps | Calibration Pumps | Hand Pumps | Hydraulic Pumps | Pneumatic Pumps | Precision Pumps

Digital Metering Pumps feature IP67 construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:20 -0600

Able to withstand harsh environments, solenoid-driven EK Series offers capacities up to 6.7 gph and max pressure of 150 psi. At 360 strokes/min, diaphragm metering pumps provide 1,800:1 turndown ratio. One-piece molded housing and sealing gaskets on cover and liquid end keep moisture out, while stop function and external control function provide proportional control. Pumps are suited for indoor/outdoor applications where they are frequently washed down.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Solenoid Pumps | Metering Pumps | Diaphragm Pumps

Low Pressure Mixing Pumps are compact and modular.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Aug 2008 07:33:52 -0600

Including quaternary and binary low pressure mixing pumps, Q-Adept HPLC systems can accommodate different low drift detectors such as variable wavelength UV/Visible, WaveQuest UV/Visible, electrochemical, refractive index, conductivity, and fluorescence, depending on analytical requirements. Space saving plug and play units incorporate PowerStream software that ensures 21 CFR part 11 compliance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Materials and Material Processing
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment

Search for suppliers of: Pressure Pumps | Modular Pumps | Meter/Mix Pumps | HPLC Instruments | Laboratory Mixers | Laboratory Equipment & Supplies