document.write('\'Powered'); document.write('
ThomasNet News® - Electronic Components & Devices
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Automotive Varistors protect electronics against ESD.
'); document.write('
'); document.write('Featuring multilayered varistor technology, ChipGuard® Automotive MLA Series protects automotive electronics from threat of ESD up to IEC 61000-4-2 Level 4. Bidirectional devices with insulating overcoat provide overvoltage protection and stable low leakage performance over operating temperature of -55 to +125°C. With response time of less than 0.5 ns, varistor clamp protectors meet ESD protection needs of HDMI, CANbus, Ethernet, sensor, and touchscreen interfaces as well as GPS and camera links.'); document.write('
'); document.write('
LED Light turns night into day for growers.
'); document.write('
'); document.write('Producing light at 3,200 K, which closely matches sun, HP4S LED Grow Light creates spectrum for maximum growing. Alta Blue Dies are combined with Alta phoquan discharge array liquid materials cured to Alta Copper Substrate Chip on Board package. Blue dies are coated in 4-stage process; each layer of raw elements are then extracted from various Alta LED ingredients. Full spectrum PDA occurs when dies react with each layer of coating, exciting and creating photons to create full spectrum light.'); document.write('
'); document.write('
Three-Phase Inverter fosters effective solar integration.
'); document.write('
'); document.write('Able to be configured to specific requirements, PROLEC-GE transforms energy coming from solar inverter and generated by photovoltaic (PV) cells in solar farms from low voltage to medium voltage. This 3-phase solar pad-mounted transformer can be engineered with 2 low-voltage windings. Promoting reliable operation, electrostatic shield helps isolate low voltage windings from high-frequency pulses present in medium voltage system. This protects solid-state components of inverters.'); document.write('
'); document.write('
Integrated Synchronous Buck Regulator enables design simplicity.
'); document.write('
'); document.write('Offering fixed 650 kHz switching frequency and 4.5–15 V input range, SiP12116 combines high- and low-side n-channel MOSFETs with current-mode, constant on-time (CM-COT) control in 3 x 3 mm DFN10 package with thermal pad. This 3 A device, along with integrated compensation, provides adjustable output voltage down to 0.6 V with ±2% accuracy. MOSFETs offer peak efficiency of up to 95%, and other features include 1 msec soft start, support for all MLCC capacitors, and full protection feature set.'); document.write('
'); document.write('
Class-D Audio Amp is suited for eCall, telematics applications.
'); document.write('
'); document.write('Supplied in 16-pin HTSSOP with PowerPAD package, TAS5421-Q1 automotive Class-D audio amplifier integrates 40 V load-dump and over-temperature protection and diagnostics in one device for emergency call (eCall) and instrument cluster systems. Mono-channel, analog differential input product integrates I²C diagnostics and offers quiescent current that eliminates need to use additional battery cells. Integration helps simplify automotive-grade diagnostic design and extend battery back-up power.'); document.write('
'); document.write('
ETL Wet-Listed LED Lamp suits outdoor signage applications.
'); document.write('
'); document.write('Helping hospitality market reduce power consumption and conserve energy, Wet-Listed Marquee LED Lamp replaces incandescent and CCFL lamps in outdoor signage applications. Construction optimizes thermal management, enabling L70-rated 50,000 hr lifetime. Consuming 2.5 W, warm white LED lamp comes in clear or frosted styles, switches on instantly to full brightness, and is designed with collimator that projects omnidirectional lighting pattern (including backwards).<br />'); document.write(''); document.write('
'); document.write('
LED Lamps provide emergency lighting in nuclear power plants.
'); document.write('
'); document.write('Designed to replace 60 W A19 style incandescent bulbs in nuclear power facilities, DDP LA-11-4/130ACDC Series offers over 1,000 lumens of output while drawing 11 W. Units deliver full brightness on 40–130 Vac/Vdc input and will illuminate seamlessly when power switches from AC to DC. Incorporating high light-extraction LED technology, lamps provide upwards of 100,000 hours of operating life.'); document.write('
'); document.write('
Klystron Modulator provides pulse fidelity and repeatability.
'); document.write('
'); document.write('Featuring >0.1% pulse fidelity and repeatability, with 100,000 hr MTBF, DTI PowerMod™ Solid-State Klystron Transmitter is suited for particle accelerators and mission-critical radars. Unit includes PLC-based controller, pulse transformer, high voltage solid-state switch, and required protection circuitry to run Klystron. With peak RF power to 100 mW, amplifier offers pulse widths from 1 µs to 5 mS, repetition rate to 1 KHz, voltage flatness of <1%, and 0.1% reproducibility.'); document.write('
'); document.write('
GaN PA in Die Form combines power, linearity, and efficiency.
'); document.write('
'); document.write('Suited for Ku-band communications systems, CMD216 delivers 16 dB of flat gain across entire 14–18 GHz bandwidth, output 1 dB compression point of +37 dBm, and saturated output power of +38 dBm. This power amplifier with fully matched 50 ohm matched design requires bias of Vdd = 28 V, 550 mA, and Vgg = -3.4 V. Power added efficiency is 32% or greater, and external bypass capacitors are only required to complete bias circuitry. Die is passivated for reliability and moisture protection.'); document.write('
'); document.write('
Thin Film Chip Resistors offer tight tolerances.
'); document.write('
'); document.write('Part of RNCF Series, 2010 and 2512 sizes feature resistance values from 24.9 Ω to 100 KΩ with 0.01% tolerances and ±5 ppm TCR. Size 0603, offering values from 24.9 Ω up to 15 KΩ, provides same tolerance and TCR. Typical applications include precision voltage dividers, test and measurement, precision controls, medical monitoring and diagnostic equipment, and audio amplifiers.'); document.write('
'); document.write('
Design Kit enables effective SLIC protection.
'); document.write('
'); document.write('Combining TISP9110MDMR-S high-surge programmable thyristor with ceramic PTC resettable fuses, PN-DESIGNKIT-47 provides effective protection of Subscriber Line Interface Circuits that must operate under 4 kV 10/700 µs surge conditions. Each kit contains sufficient Bourns® components to prototype 5 boards. Telecom applications that need overvoltage protection for this type of interface include wireless local loop, access and regenerated POTS equipment, as well as VOIP applications.'); document.write('
'); document.write('
N-FET Pre-Driver IC suits automotive DC motor applications.
'); document.write('
'); document.write('Offered in 28-pin package with 4 digital inputs, Model MLX83100 can simultaneously drive four 500 nC-rated N-FETS at up to 28 V operating voltage with minimal self-heating. Device supports 45 V automotive load dump conditions and 100% pulse width modulated operation. Integrated bootstrap function and charge pump allow for support of supply voltages down to 4.5 V, ensuring continuous operation under automotive crank conditions. Operating from -40 to +150°C, IC is fully automotive qualified.'); document.write('
'); document.write('
Splitters/Attenuators handle up to 1 in. dia, 500 W laser beams.
'); document.write('
'); document.write('Featuring set of adjustable filters for intensity reduction, LBS-400 laser beam samplers are dual-wedge attenuators that control and adjust beam output power that reaches Pyrocam™ pyroelectric beam profiling camera. Compact and portable products measure UV, NIR, or IR wavelength beams with diameters up to 1 in. and power levels from 10 mW to 500 W. Mid-IR and Far-IR wavelength lasers with focused spots down to approximately 1.5 mm can be characterized as well.'); document.write('
'); document.write('
PIN Diode Switches offer 1-12 GHz range and 90 dB isolation.
'); document.write('
'); document.write('Designed with CMOS transistor-transistor logic (TTL) drivers, 3 PIN diode switch modules are fully matched internally for 50 Ω input and output. This eliminates need for additional sensitive RF tuning components. Port-to-port isolation is >90 dB at 1–2 GHz, 80 dB at 2–4 GHz, and 75 dB at 6–12 GHz, and insertion loss varies from 1.0–2.5 dB depending on frequency and switching speed performance ranges (35 and 75 nsec). SMA-connectorized casings withstand operating range of -54 to +85°C.'); document.write('
'); document.write('
DIN Rail Mount Current Transducer monitors large loads.
'); document.write('
'); document.write('Combining current transformer and signal conditioner, AT/ATR-LS Current Transducer features split-core design that can be installed over existing conductors without disconnecting load, even in applications with multiple conductors per phase. Unit is suitable for monitoring large machines as it measures current use to detect over or under current conditions. Featuring industry standard output, loop-power, and factory calibration, transducer uses 2 wires to connect to power supply and load.'); document.write('
'); document.write('
Windowless Photodiode features circular active area.
'); document.write('
'); document.write('Housed in TO-39, 3-pin windowless package that delivers responsivity down to 1 nm, Model SXUV features active area of ∅2.5 mm and minimum shunt resistance of 20 MΩ at ±10 mV. Additional device parameters include reverse breakdown voltage of 20 V, with capacitance of 1 nF and response time of 1–2 ns. Operating from -10 to 40°C ambient, photodiode is suited for high power laser monitoring at wavelengths from 1–200 nm, or other tasks that require stable photodiode after EUV exposure.'); document.write('
'); document.write('
Multiphase Vcore ICs include PMBus(TM) interface, smart power stage.
'); document.write('
'); document.write('Compliant with Intel® VR12.5 and VR12 voltage regulation specifications, DC/DC controllers TPS53661 (6-phase), TPS53641 (4-phase), and TPS53631 (3-phase) as well as synchronous buck NexFET smart power stages CSD95372B and CSD95373B provide digital multiphase solutions for powering Intel Xeon® processors. Complete multiphase core voltage (Vcore) power management system solution for enterprise servers, storage, and high-end desktop applications features up to 95% efficiency.'); document.write('
'); document.write('
NEMA 4X Enclosures include data-ready light.
'); document.write('
'); document.write('Corrosion-resistant and IP66-rated, VibraLink® Enclosures feature LED that indicates when sensor bias output voltage levels have stabilized and data can be collected. Switchboxes provide termination for up to 48 cables and include RFI filtering, differential switching, and grounding lug. MIL-C-5015 and BNC output connectors provide quick connectivity to portable data collectors. For route-based or online monitoring, online connectivity output is available.'); document.write('
'); document.write('
Ultrafast Recovery Rectifiers come in low-profile SMF package.
'); document.write('
'); document.write('AEC-Q101-qualified, 1 A FRED Pt® rectifiers reduce switching losses and power dissipation in automotive and telecom applications. Planar structure and platinum doped lifetime control promote performance and reliability, while SMF (DO-219AB) eSMP® series package, with <1 mm profiles, increases power density. Reverse voltages are 100 V for VS-1EFH01WHM3 and VS-1EFH01W-M3 and 200 V for VS-1EFH02W-M3 and VS-1EFH02WHM3. Reverse recovery time is 25 ns, and forward voltage drop is 0.93 V.'); document.write('
'); document.write('
PSE Controller, Module, and Design accelerate PoE development.
'); document.write('
'); document.write('Dual-layer PoE power sourcing equipment (PSE) evaluation module and TI Design based on TPS23861 quad-port PoE controller reduce development time when creating PoE-enabled network video recorders, IP phone switches, and wireless base stations. Minimizing material and build expense, TPS23861 evaluation board features 2 controllers with associated circuitry on 2-layer PCB. Plug-and-play evaluation module is also offered in auto mode, which eliminates need for host control.'); document.write('
');