document.write('\'Powered'); document.write('
ThomasNet News® - Construction Equipment & Supplies
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Rotary Cutter Attachments transform undergrowth into mulch.
'); document.write('
'); document.write('Designed to help compact equipment operators cut overgrown grass, brush, and small trees, Brushcat™ Attachments feature standard 3 in. cutting height. Series includes standard flow or high-flow options in 66 and 72 in. widths, and 80 in. model with high-flow capability. Oscillating deck enables attachment to follow ground surface, while 2 direct-drive, offset motors featuring dual-blade design reduce weight and shorten deck size. For safety, front safety chains help contain debris within deck.'); document.write('
'); document.write('
Hybrid Insulation targets deck to sky roofing assemblies.
'); document.write('
'); document.write('Measuring 48 in. x 50 ft x 3/8 in., Duro-Guard XPS Hybrid Fan Fold is made with rigid extruded polystyrene core and wrapped with facers for resistance to heat flow and moisture. Each fold is cut to allow board to lay flat and contains section that is crushed for installation in windy applications. With no CFCs, HCFCs, formaldehyde, or VOCs, product is used as recover board over granulated or smooth cap sheets, aggregate surfaced built up roofs, aged coal tar pitch roofs, and single-ply membranes.'); document.write('
'); document.write('
Foundation Drilling Tools feature quick change holders.
'); document.write('
'); document.write('In addition to quick-change tool holders and tools, KF Series includes duo-cut and single-cut wall cutters, welding bar tools and teeth, modular pilot drills, and modular pilot drill holders. Series covers majority of core barrel applications and is suitable for all foundation drilling conditions, especially deep foundation of large-diameter bore holes. Also, tapered seating design provides strong seating area and enables easy removal of tool.'); document.write('
'); document.write('
Block-Bit System optimizes trenching and foundation drilling.
'); document.write('
'); document.write('Featuring internal groove in block bore, RockRazor™ Block and Bit System accommodates 3 retainer styles and 6 rotating or non-rotating bits. Not only can rotating bits be quickly swapped out with non-rotating bits when applications or conditions change, non-rotating flat-spade bits can be indexed in up to 4 positions for maximum productivity. At tip end, proprietary point designs combine with advanced carbide grades, resulting in minimized cracking and extended performance in abrasive conditions.'); document.write('
'); document.write('
Quick-Change Block System maximizes uptime.
'); document.write('
'); document.write('For surface mining and trenching machines, no-weld QC42 Quick Change Block System cuts time needed to change block from machine base from 60–90 min down to 10–15 min. System features 1070 spring steel retainer that provides added safety feature to keep unit together when not fully engaged from tapered press fit. Rubber bumper stops keep block from over-locking, while hardfaced block face ensures optimal conical rotation and minimizes wear.'); document.write('
'); document.write('
Block System optimizes road milling efficiency.
'); document.write('
'); document.write('Consisting of taper-press retention system that requires only single spare part for backup, KPL/KPR302 System offers long gauge length, which minimizes power requirements for road milling. Longer wear length translates into extended milling before maintenance is required. Tools and holders are designed for all road milling applications and cutting conditions, particularly for profile milling with cuts greater than 6 in.'); document.write('
'); document.write('
Road Milling Tool offers added wear protection.
'); document.write('
'); document.write('In addition to proprietary point design and optimized hardness throughout head area, RoadRazor II™ features carbide ring segments below tip, which add wear protection for steel tool body and extend performance in abrasive cutting conditions. At retainer end, thicker material ensures optimized fit and rotation throughout life of tool. Also, wide collar provides holder protection.'); document.write('
'); document.write('
Fleet and Asset Management Software integrates with scales.
'); document.write('
'); document.write('Integrating with LOADRITE® X2350 excavator scales and L2180 wheel loader scales equipped with Trimble® SNM940 Connected Site® Gateway, VisionLink® v2.10 gives machine operators and managers instant access to excavator and wheel loader payload information such as total bucket loads, trucks loaded, and running totals in near real-time. Combining payload weight information with fleet dynamics and cycle time tracking provides metrics for monitoring and optimizing machine and project performance.'); document.write('
'); document.write('
Height Adjustable Work Platform helps prevent injury.
'); document.write('
'); document.write('Available in customized lengths and widths, Height Adjustable Work Platform lifts personnel to ergonomically suitable height for safe working position. Unit is available in heavy-duty steel as well as food-grade stainless steel. In addition to static version on heavy duty legs, platform can be configured with locking wheels. Lift/lower system can be mechanical device or include electric motor with controls. Applications include food processing, manufacturing, warehousing, painting, and cleaning.'); document.write('
'); document.write('
Planetary Drive Augers feature high-torque gearbox.
'); document.write('
'); document.write('Measuring 11.5 in. W x 39.6 in. L, Bobcat® 35PH and 50PH can dig to depths of 73 in. without extension. Model 35PH provides 4,177 lb-ft of torque at 3,500 psi, while Model 50HP delivers 5,291 lb-ft. Drive housing, measuring 12 in. long, allows augers to follow bit into hole to achieve maximum depth. Compatible with Bobcat skid-steer loaders, compact track loaders, all-wheel steer loaders, and compact excavators, augers are suitable for working in rock, clay, coral, and frost.'); document.write('
'); document.write('
Vibratory Tampers offer max travel speed of 66 fpm.
'); document.write('
'); document.write('Weighing 128 lb, Model BT60 delivers up to 3,372 lb of impact force and is suited for time-intensive use in confined spaces. Model BT65, weighing 150 lb, produces 3,822 lb of impact force and is suitable for jobs with highest compaction demands. For occasional use in typical applications, Model BVT65 weighs 143 lb and delivers 3,597 lb of impact force. Each is powered by 4-cycle Honda engine with recoil starter. BT60 offers operating width of 9 in., while BT65 and BVT65 each have 11 in. width.'); document.write('
'); document.write('
Crawler Dozers offer fully automatic blade control.
'); document.write('
'); document.write('Meeting EPA Tier 4 Interim regulations using smart engine technology, Models D37EXi/PXi-23 and D39EXi/PXi-23 can perform finish grading as well as rough dozing. At 2,200 rpm, dozers push with net 89 hp and 105 hp, respectively. Machines include factory-installed cab top GNSS antenna, optimized inertial measuring unit, and stroke sensing hydraulic cylinders. Komatsu Diesel Oxidation Catalyst system removes soot using 100% passive regeneration without need for Diesel Particulate Filter.'); document.write('
'); document.write('
Mini LED Light Pole features pneumatic operation.
'); document.write('
'); document.write('With Model PLM-13.5-NAC-2XLEDP3W-3-1227, dual light heads can be elevated to max height of 13.5 ft. Aluminum mounting plate on top of pneumatic mast holds two LEDP3W-3 lights that produce total of 1,368 lm while drawing 18 W. Each light bar contains 3 CREE XLamp XR-E 3 W LEDs that produce 228 lm. They are paired with high-purity optics to produce tightly focused 10° spot beam approximately 375 ft long. IP68-rated waterproof, lamps can be adjusted independently for max coverage.'); document.write('
'); document.write('
Compact Excavator features digital operator interface.
'); document.write('
'); document.write('Built around 37.7 hp Yanmar Tier IV certified diesel engine, 4.5 metric ton Z45 GEN:2 includes digital operator interface that provides real-time information, service reminders, and 90 days of operating history. Standard auxiliary proportional hydraulics give operator infinitely variable control of hydraulic flow, while ECO Mode reduces engine speed by 10%, cutting fuel consumption. When hydraulic movement has not occurred for more than 4 sec, Auto Deceleration lowers noise and emissions levels.'); document.write('
'); document.write('
Compact Excavator features zero tail swing design.
'); document.write('
'); document.write('Built around 37.7 hp Yanmar Tier IV certified diesel engine, 4.5 metric ton Model 450Z NXT2 includes digital operator interface that provides real-time information, service reminders, and 90 days of operating history. Auxiliary proportional hydraulics give operator infinitely variable control of hydraulic flow, while ECO Mode reduces engine speed by 10%, cutting fuel consumption. When hydraulic movement has not occurred for more than 4 sec, Auto Deceleration lowers noise and emissions levels.'); document.write('
'); document.write('
Concrete Plastic Wall Forms feature stay-in-place design.
'); document.write('
'); document.write('Measuring 24 in. wide x 6 in. thick, Extrutech FORM System snaps together with double-spline, E-Locking System. Forms can be insulated with 2 in. of foam board for R-14, and brick or stone masonry may be added to exterior to optimize building appearance. Featuring high gloss, non-porous surface that resists damage, waterproof concrete forms will never rust, rot, corrode, or discolor and are suitable for high moisture areas where daily cleaning and room sanitation is critical to business.'); document.write('
'); document.write('
Crawler Dozer incorporates intelligent machine control.
'); document.write('
'); document.write('With fully automatic blade control capabilities, D51i-22 performs automated rough dozing and finish grading. Longer track-on ground standard (EX) and low ground pressure (PX) models offer flotation and weight distribution options to match application needs. Operating weights range from 27,381–29,057 lb, depending on configuration, and net 130 hp occurs at 2,200 rpm. Other features include cab top GNSS antenna, enhanced inertial measurement unit, and stroke sensing hydraulic cylinders.'); document.write('
'); document.write('
Crawler Dozers feature automatic blade control.
'); document.write('
'); document.write('In automatic mode, iMC Crawler Dozers perform rough dozing as well as finish grading. When rough dozing, automatic blade control monitors blade load and adjusts blade elevation to minimize track slip. As work progresses, blade control adjusts accordingly to provide precision finish grade performance. Add-on machine control components mounted on blade have been replaced with factory-installed cab top GNSS antenna, inertial measurement unit, and stroke sensing hydraulic cylinders.'); document.write('
'); document.write('
Stay-in-Place Concrete Form creates 6 in. poured walls.
'); document.write('
'); document.write('Offering easy-to-clean sanitary surface on both sides, FORM System creates structural wall system that is builder and customer friendly, and is suited for use in dairy, car wash, and food facilities. System consists of 24 x 6 in. panel that is pre-cut to project specifications and snaps together with double-spline E-Locking System.'); document.write('
'); document.write('
Tier 4 Compliant Excavators employ Non-DPF emissions solution.
'); document.write('
'); document.write('Medium-sized M-Series machines – conventional tail swing E42, Zero Tail Swing E45, minimal tail swing E50, and conventional tail swing E55 – include non-DPF (diesel particulate filter) engine solution and forward-mount instrumentation system. Ultra-low particulate combustion (ULPC) engine, featuring combustion chamber that minimizes amount of particulate matter created during combustion, accomplishes Tier 4 emissions compliance. All models offer clamp-ready, extendable-arm configuration.'); document.write('
');