document.write('\'Powered'); document.write('
ThomasNet News® - Welding Equipment & Supplies
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Welding Helmet features fixed-shade design.
'); document.write('
'); document.write('Designed to meet ANSI Z87.1 and CSA Z94.3 standards, Industrial Passive™ Helmet provides basic, consistent face and eye protection for fabricators at all levels operating in any industry. Helmet comes in matte black finish with fixed Shade-11 lens, ratchet headgear, and decal sheet for customizing shell to fit personal style.'); document.write('
'); document.write('
Stick Electrode resists moisture in humid conditions.
'); document.write('
'); document.write('Consisting of mild-steel, low-hydrogen stick welding consumable, Millennium Arc™ 7018 is designed for applications in power generation, petrochemical, pressure vessels, and pressure piping. Product has no intentional addition of zinc in its composition, which minimizes zinc in welding fumes. Providing effortless slag removal, electrode delivers flat bead profile and clear weld puddle without slag interference.'); document.write('
'); document.write('
Cutting Fuel is made from renewable waste.
'); document.write('
'); document.write('Consisting of rich mix of gases, MagneGas® 2 can be used for brazing and welding, providing complete replacement for flame applications of acetylene and propane. According to tests performed on track-based cutting systems, MagneGas® 2 had 38% faster cutting speeds on 2 in. carbon steel and about 34% reduction in oxygen consumption compared to acetylene. MagneGas® 2 showed even better results when compared to propane.'); document.write('
'); document.write('
Ultrasonic Spot Welders work with foils as thin as 7 microns.
'); document.write('
'); document.write('Able to weld multiple layers and/or delicate foils to tabs or terminals, SonoWeld® 1600 and Dual Head Spot Welders also accommodate battery pouch assembly and HV termination welding. Durable bonds are created in one operation that takes seconds; does not employ any heat, current, fluxes, or filler; and does not produce any arcs, sparks, or fumes. Dual Head Spot Welder can join up to 100 layers of copper or aluminum foil in one pulse. Systems offer outputs of 1,500 and 2,500 W.'); document.write('
'); document.write('
Power Sources and Controllers provide arc stability.
'); document.write('
'); document.write('Combining digital process control technology with power regulation, SubArc Digital Series includes SubArc DC 650/800 Digital, SubArc DC 1000/1250 Digital, and SubArc AC/DC 1000/1250 Digital. Units can handle Submerged Arc and Electroslag applications, from DC single-arc to multi-wire tandem welding. Series also offers analog and digital interface controls and range of wire drive motors and accessories, including single- and twin-wire torches, narrow gap torches, and internal/external cladding heads.'); document.write('
'); document.write('
Custom Fuel Tanks serve stationary applications.
'); document.write('
'); document.write('Used to hold combustible fuel, UL 142-listed tanks, certified for USA and Canada, are typically placed under standby power generator enclosures. Design options include multiple lifting options and either I-beam structural support or flat-top design with internal support for generator. Along with 110% secondary containment, mechanical or electronic fuel gauge, and 2 in. lockable fill port and vent, features include rupture basin alarm, supply and return ports, and float switch.'); document.write('
'); document.write('
Nickel-Based Wire targets MIG and TIG welding applications.
'); document.write('
'); document.write('Made from nickel alloy, Techalloy® X delivers oxidation resistance in TIG and MIG welding of nickel-chromium-molybdenum alloys. Wire is suited for petrochemical applications where it provides optimized stress corrosion cracking, and for aerospace applications that are subject to high operating temperatures. In addition, Techalloy® X meets AMS 5798G chemical and tolerance requirements.'); document.write('
'); document.write('
Compact Lightweight Welding Gun reduces fumes and smoke.
'); document.write('
'); document.write('Intended for medium- to heavy-duty solid or flux-cored welding applications, Clean Air™ Fume Extraction Gun optimizes weld fume capture, gas flow, and weld access via sliding nozzle shroud that adjusts to one of 4 fixed positions. Vacuum chamber size promotes operator comfort and control by providing joint access and visibility, while 360° vacuum hose swivel on rear of handle promotes flexibility and reduces wrist fatigue. Gun comes in 400, 500, and 600 A models with 45° or 60° neck bend.<br />'); document.write(''); document.write('
'); document.write('
Seamless Wires resist moisture pickup.
'); document.write('
'); document.write('Available in flux-cored and metal-cored versions, Hobart® MEGAFIL® Wires have less than 4 mL of diffusible hydrogen per 100 g of weldment, which helps mitigate cracking risks. Copper coating optimizes current carrying capabilities as well as weld quality. Proprietary manufacturing process adds to consistency of wires by ensuring uniform flux filling, while uniform shape helps minimize contact tip wear, making wires suitable for semi-automatic and robotic welding applications.'); document.write('
'); document.write('
Clips and Clamps meet high-amperage requirements.
'); document.write('
'); document.write('Available in black or red with heavy-duty, glass-filled polyamide handle and glass-filled nylon body, High-Amperage Clips include 300 A battery Model BU102B and kelvinized Model BU102BK as well as 400 A Model BU102W for grounding of welding equipment during operation. BU-102B clips feature serrated jaws, created from stamped 100% copperplate, while BU-102W jaws are machined from 100% copper slugs with serrated teeth. Each bus bar within clips ensures effective heat dissipation.'); document.write('
'); document.write('
Rugged Welder/Generator employs Tier 4i-compliant engine.
'); document.write('
'); document.write('Along with 600–700 A welding output, Air Vantage® 650 (K2961-1) provides 20 kW of continuous, 3-phase, 240 Vac power and 12 kW of single-phase AC power for auxiliary use. Chopper Technology® promotes maximum DC arc welding performance for stick/TIG/MIG welding, flux-cored wire, downhill pipe, and arc gouging. Users can gouge using up to ½ in. carbons with built-in air compressor and weld using up to 0.120 in. Innershield® cored wires and 3/32 in. Lincore® hardfacing cored wires.'); document.write('
'); document.write('
Welding Electrode exhibits smooth arc transfer.
'); document.write('
'); document.write('Available in .045, .052, and 1/16 in. diameters, Select 707 E71T-1 Flux Cored Gas-Shielded Electrode provides optimized weldability at low or high current settings while exhibiting arc stability. All-position wire also delivers robust mechanical properties at temperatures as low as -20°F. Applications include general fabrication, structural steel, construction equipment, railcar fabrication, and shipbuilding.'); document.write('
'); document.write('
MIG Push-Pull Welding Systems target specific industries.
'); document.write('
'); document.write('In addition to Magnum® PRO AL air-cooled push-pull gun and aluminum drive roll kits, multi-process POWER MIG® 350MP Trailer Manufacturing One-Pak™ includes SuperGlaze 5356 TM™ 3/64 in. diameter MIG wire specifically developed for aluminum trailer manufacturing industry. Another One-Pak® package, specifically targeted toward aluminum automotive collision repair and fabrication, has same components but includes SuperGlaze 5554 3/64 in. diameter MIG wire instead.'); document.write('
'); document.write('
MIG Welding Guns suit light- and heavy-duty applications.
'); document.write('
'); document.write('Designed specifically for use with aluminum wire and other soft alloys where wire feeding consistency is critical, Spoolmatic Pro 15A and 30A come with 15 ft and 30 ft cable, respectively. Motor provides smooth feeding, while brass-to-brass connections help ensure optimal electrical contact for steady arc performance. Threaded quick-change 360° rotatable barrels, available in different bends and lengths, fit numerous applications and welding operator preferences.'); document.write('
'); document.write('
Odd Form Component Feeder does not require any downtime.
'); document.write('
'); document.write('Stack Stick Feeder is suited for feeding odd-form components to Sigma Series modular mounters. Able to concurrently accommodate up to 6 sticks, each with max length of 23.6 in., feeder incorporates auto change feature that replaces empty sticks with full ones automatically. Design eliminates need to stop production, and changeover time is 2 sec.'); document.write('
'); document.write('
Wireless Pedal supports TIG welding applications.
'); document.write('
'); document.write('By eliminating cords that can lead to tripping hazards, K3127-1 Wireless Pedal minimizes clutter and optimizes workplace safety. System includes K3350-1 foot pedal and K3351-1 receiver, which operate on variety of Lincoln power sources. Receiver features power cable adapter requiring 115 V service, and LED display that indicates status of foot pedal battery life, welding output, and signal integrity. Extension legs adapt pedal for use at angle or on irregular surfaces.'); document.write('
'); document.write('
Welding Training System features reality-based operation.
'); document.write('
'); document.write('Featuring touchscreen monitor and advanced motion-tracking technology, LiveArc™ recruits, screens, trains, and manages welding trainee performance via live welding arc. System\'s 400 A SmartGun has built-in LEDs that camera tracks to provide feedback on technique parameters, including work and travel angles, contact tip-to-work-distance, travel speed, and aim. Promoting trainee independence and learning, quantitative feedback helps users gain proficiency needed for skilled welding opportunities.'); document.write('
'); document.write('
Metal-Cored Wire offers optimized impact, cracking properties.
'); document.write('
'); document.write('Available in .045, .052, and 1/16 in. dia, Hobart® FabCOR® CVN wire is formulated to maximize impact properties at temperatures as low as -50°F to reduce risk of cracking in severe applications. Diffusible hydrogen levels under 3 ml per 100 g of weldment also increase cracking resistance. Operating with 75%–95% argon/CO2 balance, wire provides 77,000–86,000 psi tensile strength and can be used for single- or multi-pass welding in manual, mechanized, or automated applications.'); document.write('
'); document.write('
Ground Clamps are designed to meet electrical industry demands.
'); document.write('
'); document.write('Accommodating electrical industry needs, UL-Listed and CSA-Certified Type GPL U-Bolt Ground Clamps are available for pipe, rod, rebar, and fence posts. Spacer is designed to optimize available positive contact area, and clamps rotate 90° for installation flexibility. Products are suitable for direct burial in earth or concrete.'); document.write('
'); document.write('
Abrasive Belt Coping Machine has compact footprint.
'); document.write('
'); document.write('Used to cope square, rectangular, and irregularly shaped tubing and pipe for seamless fit, LCV 3000 is designed to take up minimal shop space and fit into mobile welding truck. This 300 lb machine, measuring 48 x 30 x 14 in., can be equipped with ¾–5 in. spindles and is manufactured from steel and aluminum for strength and service life. Adjustable vise allows for precise angles from 30° to 90°.<br />'); document.write(''); document.write('
');