document.write('\'Powered'); document.write('
ThomasNet News® - Test & Measuring Instruments
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Handheld Device measures temperature and humidity.
'); document.write('
'); document.write('Equipped with 2-line color display, Model XC200 calculates dew point temperature of ambient air and provides accurate measurement of temperature and relative humidity. Unit displays Max, Min, Hold, Avg, and Act. Model XC250, combining precision of XC200 with laser-assisted pyrometer, provides continuous measurement and output of thermopile to LCD. Device offers adjustable emissivity and configurable condensation/dew alarm with contact-free measurement. Both include calibration certificate.'); document.write('
'); document.write('
Maneuverable Pipe Inspection Camera works in limited-access areas.
'); document.write('
'); document.write('Able to be used in pipelines with bends, curves, and corners, VIPER ADV features PVC-coated fiberglass probe and long spring joint that promote pushability and maneuverability. Probes are 6.5 mm in diameter and come in 131.2 and 196.8 ft lengths, while 1.0 in. dia camera head is equipped with HD CCD chip and super bright LED lights and is protected by Sapphire lens. Packed into waterproof case, control unit features 9 in. TFT color LCD, control buttons, SD memory card slot, and video output.'); document.write('
'); document.write('
Miniature Immersion Sensor accelerates fluid temperature reading.
'); document.write('
'); document.write('With 1.5 sec response time, thermal gradient of <0.02 K/K, and ±1.5°C base temperature accuracy, NTCAIMME3 consists of NTC thermistor chip mounted in its stainless steel housing with twin PVC-insulated AWG No. 30 lead wire connections. Tip with 2.0 mm dia accelerates accurate temperature sensing with minimal heat loss through connecting wires. Available with brass collar for sealed mounting or without collar for custom mounting, RoHS-compliant product operates over -25 to +105°C range.<br />'); document.write(''); document.write('
'); document.write('
Radar Level Meters feature modular design.
'); document.write('
'); document.write('Able to operate from tank roof or recessed space, 2-wire loop-powered DR 2000® Guided Wave Radar Level Meter performs accurate level measurement even when product surface is agitated or covered with layer of foam. Utilizing frequency modulated continuous wave technology, 2-wire DR 5200® Open Air Radar Level Meter provides highest accuracy in non-contact meter. Both modular units are SIL2 compliant to IEC 61508 for safety-related systems and suitable for storage tanks and process vessels.'); document.write('
'); document.write('
RTD Simulator with Climate Control has TCR down to ±1 ppm/°C.
'); document.write('
'); document.write('Bulk Metal® Foil RTD Simulator resistor simulates RTD PT-100 and PT-1000 outputs for calibration of RTD instruments. Along with nominal TCR of ±1 ppm/°C from -55 to +125°C, +25°C ref, and load-life stability of ±0.005% after 2,000 hr of rated power at +70°C, features include power ratings to 0.6 W at +70°C and max working voltage of 300 V. Resistance range is 10 Ω to 5 kΩ, with tight resistance tolerance to ±0.005% (50 ppm). Design is non-inductive (<0.08 µH) and non-capacitive.'); document.write('
'); document.write('
Refurbished/Replacement TCDs are available for legacy Varian GCs.
'); document.write('
'); document.write('Refurbished or replacement thermal conductivity detectors (TCDs) are available for Bruker (Varian) gas chromatographs (GCs). Each detector, made of stainless steel and supplied with rhenium-tungsten (WX) filaments as standard, meets original equipment specifications and comes ready to install in legacy Varian GC. Special filaments for reactive samples are available. Corrosion-resistant detectors utilizing nickel, Monel®, titanium or gold-plated thermal conductivity blocks are also offered.'); document.write('
'); document.write('
Condition Monitoring System reports shaft current issues.
'); document.write('
'); document.write('Smart CDR™ provides users with instant feedback on how CDR® (Current Diverter Ring®) is performing with regards to diverting shaft currents away from bearings to ground. By diverting harmful shaft currents to ground, solution help prevent fluting on bearings as well as premature bearing failure in variable frequency drive (VFD)-driven motors. Interface alerts users in real-time if there is not optimal contact between grounding brushes and shaft.'); document.write('
'); document.write('
Test Probe Cable Assemblies aid high-frequency circuit inspection.
'); document.write('
'); document.write('Suited for testing Hirose MS-156 and Murata MM8030 subminiature coaxial switch connectors, co-axial test probe cable assemblies offer respective mating test cycle durability of 500 and 2,000 operations. Probes can be used for testing RF circuits, from development to final production, as well as high frequency coaxial switches. Standard cable assemblies come with SMA jack connectors. Other coaxial interface connectors, test probe orientations, and cable lengths are also available.'); document.write('
'); document.write('
Flexible Analog Module has 8 independently configurable channels.
'); document.write('
'); document.write('Available for flight test instrumentation products and Acra KAM-500 modular DAQ unit, ADC/136 lets users interface to different analog sensors on same module without decreased accuracy. There are 8 channels that can be used with various sensor types, and configuration of each can be performed with DAS Studio software. Also, module supports programmable primary gain, input range, and balance for each channel with choice of IIR or FIR filter. Current or voltage excitation is also programmable.'); document.write('
'); document.write('
Profile Measurement Device uses non-contact process.
'); document.write('
'); document.write('Optimized with software release 6.0, CALIPRI delivers high-precision measurement for wide range of profiles, including rails, switches, wheels, or brakes. Three laser lines scan surface and intelligent image processing system records segments of object profile and combines them into entire profile. This profile is then measured by correspondingly defined algorithms, and all important quality values as well as wear values are displayed. Results are free of operator influence and are reproducible.'); document.write('
'); document.write('
Portable UHF RFID Readers track product temperature.
'); document.write('
'); document.write('Available in wearable and keyfob versions, both with Bluetooth interface, CAEN UHF RFID Readers collect data from Easy2log© temperature sensor RFID tags. Units can configure devices and download data through packaging and boxes with wireless link. Designed for indoor and outdoor use, readers are compliant with ISO 18000-6C/EPC C1G2 standards, and can integrate with traceability web portal for complete cold chain validation in food and pharmaceutical industries.'); document.write('
'); document.write('
Signal Conditioner supports electronic partitioning.
'); document.write('
'); document.write('Designed for operation with passive sensors remotely located up to 100+ ft, EAZY-CAL LVC 4000 Signal Conditioner is configurable with any type of LVDT, RVDT, VR half bridge, and even LVDT-based pressure sensors. Pushbutton programmable unit offers choice of 2,500, 5,000, 7,500, or 10,000 Hz drive frequency, as well as 4–20 mA (analog), 0–10 Vdc (analog), and RS485 (digital) outputs. For multiple-channel applications, up to 16 devices can be connected together in master/slave configuration.'); document.write('
'); document.write('
Test Lead Sets are marked with CAT ratings.
'); document.write('
'); document.write('Using silicone cable with 2 layers of insulation, Test Leads are designed so that white under-layer becomes visible if outer layer becomes damaged, providing visual alert of potential safety hazard. Test Leads are used by electrical test and safety PAT testers, electrical contractors, and test and repair houses. Products are fully rated for all aspects of IEC61010, particularly with regard to voltage and current ratings, creepage distances, and cable specification and insulation ratings.'); document.write('
'); document.write('
Humidity Calibrator provides 12 hr of battery-powered use.
'); document.write('
'); document.write('Designed for calibrating RH sensors, S503 Portable Humidity Calibrator includes optional battery pack for customers that need to conduct calibrations at sites without electricity. Unit can perform 3-point calibration in about 1 hr, and, when combined with chilled mirror hygrometer, offers transportable and traceable, total humidity calibration system. Providing 12 hr or more of continuous use from single charge, battery pack allows full day of calibrations to be completed on-site.'); document.write('
'); document.write('
Atom Probe Microscope delivers 3D sub-nanometer analysis.
'); document.write('
'); document.write('Housed in ergonomic platform, LEAP® 5000 offers 3-dimensional nano-scale surface, bulk, and interfacial materials analysis with atom-by-atom identification and accurate spatial positioning. System comes with redesigned detection system, advanced laser control, accelerated data collection, and real-time monitoring capabilities. Microscope provides analytical accuracy, sensitivity, and 3D spatial resolution across wide variety of metals, semiconductors, and insulators.'); document.write('
'); document.write('
SDR Rapid Prototyping Kit supports MIMO wireless transceivers.
'); document.write('
'); document.write('Featuring FPGA mezzanine card with dual 2 x 2 AD9361 RF transceivers, Model AD-FMCOMMS5-EBZ enables rapid prototyping of 4 x 4 multiple-input multiple-output wireless transceiver applications on Xilinx® Zynq®-7000 All Programmable SoC development platforms. Software-defined radio prototyping kit also includes reference designs, design and simulation tools for MathWorks, hardware description language code, and device drivers for Zynq-7000 All Programmable SoCs.'); document.write('
'); document.write('
RF Reference Sources calibrate spectrum analyzers.
'); document.write('
'); document.write('Designed specifically for RF calibration, Models 96270A and 96040A provide accurate signal delivery direct to UUT input. Units feature integrated frequency counter rated at 300 MHz and 50 MHz, respectively, while Model 96270A also includes dual power meter readout, eliminating need for additional instruments. Model 96270A covers more than 80% of test points required for calibrating spectrum analyzer models below 27 GHz, and nearly all spectrum analyzers of any frequency range.'); document.write('
'); document.write('
Programmable Power Supplies offer precision, speed, sensitivity.
'); document.write('
'); document.write('Respectively able to output up to 32 V at up to 6 A and up to 60 V at  up to 3.2 A, DC power supply models 2280S-32-6 and 2280S-60-3 also measure standby current loads and load current pulses produced by battery-powered wireless, medical, and industrial devices. Series 2280S outputs up to 192 W of linear regulated DC power, stores up to 2,500 measurement points, and features 4.3 in. TFT screen, choice of front or rear panel terminals, graphing function, and GPIB, USB, and LXI LAN interfaces.<br />'); document.write(''); document.write('
'); document.write('
Digital Radio Test Set supports Motorola APX radios.
'); document.write('
'); document.write('Providing automated test and alignment of Motorola APX radios without need for user interaction, Aeroflex 3920B Digital Radio Test Set ensures alignment to manufacturer-recommended specifications and to industry standards. System can perform Phase II Transmit and Receive tests even if radio is not currently being used for that application. This ensures that radio will work if system architecture changes in future and where Phase II operation may be required.'); document.write('
'); document.write('
Development Kit supports industrial spectral sensing.
'); document.write('
'); document.write('Measuring 42 x 42 x 24 mm, STS Developers Kit combines STS spectrometer, Raspberry Pi microcomputer, and customizable software with Ethernet and wireless capabilities, enabling spectroscopy to be deployed anywhere in plant for measurements like reflected color, irradiance, reaction endpoint control, or UV-Vis transmission. WiFi range is up to 150 m, and data is securely stored to onboard SD card. Kit offers choice of STS-UV (190-650 nm), STS-Vis (350-800 nm), or STS-NIR (650-1100 nm) models.'); document.write('
');