document.write('\'Powered'); document.write('
ThomasNet News® - Plant Furnishings & Accessories
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
In-Ground Door Operator supports stack pressure monitoring.
'); document.write('
'); document.write('Designed for heavy-duty applications, NB-500-LE-OPCON in-floor, springless, power open/power close door operator is rated for doors weighing up to 2,500 lb or operating torque of 1,000 lb-in. UL50 TYPE 4, In-Floor Underground Conversion is also UL 325 Listed. Product provides flexibility for heavier doors to resist stack pressure or wind loads, yet remain compliant with ANSI 156.19 when required. Stack Pressure Monitoring (SPM) is optional on all low energy models.'); document.write('
'); document.write('
Workstation Covers protect products from ESD.
'); document.write('
'); document.write('Made of polyester fabric with minimum 9% carbon conductive nylon fibers, ESD Workstation Covers protect products from ESD, dust, and other contaminants. Surface resistance is 1 x 105 < 1 x 107 Ω RTT to attenuate electrostatic fields and electrostatic discharges. Available in 18 x 24, 36 x 48, and 48 x 48 in. sizes, covers feature built-in continuous and consistent charge dissipation. Attached 3/8 in. snap allows covers to be grounded to workstation's ground point.'); document.write('
'); document.write('
Wind Load Garage Doors help protect coastal homes, businesses.
'); document.write('
'); document.write('Constructed of steel and polyurethane insulation, impact-resistant wind load garage doors offer thermal efficiency and storm protection. Wind load ratings, depending on door size, reach up to +64.00/-72.00 psf. WindStorm™ doors protect against damage from high wind. Commercial doors (Thermacore® models 515/525) and residential doors (Thermacore series 5745/5765, Courtyard Collection® series 7565) come in range of panel styles. Calculated R-value, depending on model, is 12.12 or 16.22.'); document.write('
'); document.write('
Protective Covers fit half size bakery racks.
'); document.write('
'); document.write('Protecto® SUPRO-14-EC-1/2 covers half sized bakery racks, which stand 38 in. tall. Constructed from clear, .010 in. thick, phthalate-free, tin-free, lead-free, and heavy metal-free PVC, cover separates contents from adverse environmental factors and helps prevent food spoilage.'); document.write('
'); document.write('
Enclosure Vent facilitates heat and moisture dissipation.
'); document.write('
'); document.write('Suited for outdoor use, IPV Series PC/PC Wide Opening External Vent allows circulation of air while protecting againt rain water and falling debris. Both 2.91 x 2.91 x 1.1 in. and 3.95 x 3.95 x 1.25 in. models, constructed of gray polycarbonate plastic and 10% fiberglass, withstand exposure to UV light and water in accordance with UL 746C. Also able to be used indoors, product features continuous gasket between enclosure and vent and is designed to provide IP32 protection.<br />'); document.write(''); document.write('
'); document.write('
Storage Systems complement professional, residential requirements.
'); document.write('
'); document.write('Comprising residential and professional storage and workbench products for any professional or residential garage setting, Collector's Edition Garage System includes heavy-duty, 14 and 16 gauge steel, all-welded cabinets that range up to 48 in. wide and 84 in. high. Features include 3-point locking mechanisms, optional drawers, bins, and shelves. Workbenches come in 24 or 48 in. widths and with multiple configurations of drawers, doors, and tops as well as with or without wheels.'); document.write('
'); document.write('
Polycarbonate Enclosure withstands outdoor environments.
'); document.write('
'); document.write('Suited for outdoor applications, 5.50 x 4.13 x 2.44 in. ML-45F is molded of light gray UV-stabilized polycarbonate and UL Listed to 508A as well as NEMA Type 1/2/4/4X/12/13 specifications. Opaque and clear covers are available, and form-fitted gasket makes enclosure suited for use in diverse environmental conditions. Along with silicone gasket seal and UL94V-0 flame rating, features include molded on surface-mounting flanges, plastic PCB mounting bosses, and stainless steel screws.'); document.write('
'); document.write('
Storefront System offers hurricane impact resistance.
'); document.write('
'); document.write('Engineered for hurricane resistance on low- to mid-rise commercial buildings, 34000 Series has been tested to Florida Building Code TAS 201, 202, and 203 standards and is compliant with ASTM E 1886/1996 Wind Zone 4 impact/cyclic criteria. Series features 2½ x 5 in. flush-glazed system and impact-resistant screw-spline framing, glazed with 1 5/16 in. laminated glass positioned in center of frame. Non-thermal E34000 Series and T34000 Series with poured-and-debridged thermal option are available.'); document.write('
'); document.write('
Electronic Enclosures combine plastic and aluminum.
'); document.write('
'); document.write('Available in 36 models, SYNERGY Electronic Enclosures are suitable for handheld, desktop, and wall mounted equipment. Glass reinforced polyamide pillars snap into recessed top panel, locate assembly extrusion, and are fixed to bottom part with 4 stainless steel Torx T10 anti-tamper screws. Top and base sections are manufactured from UV-resistant ASA+PC-FR, while main body section is extruded from AlMgSi 0.5 aluminum, blasted with glass beads, and anodized in silver for optimized surface finish.'); document.write('
'); document.write('
Ergonomic Workstation offers electronic height adjustment.
'); document.write('
'); document.write('With Ergo Tier ARC, users can set focal length of monitors and swing them left or right for viewing in different ergonomic sit-stand or collaboration positions. Workstation is height-adjustable from 28–47 in. from floor and has independent electronic adjustment of monitor platform height. Monitors are mounted in arc shape to enable viewing within visual reach envelope of user and are adjusted with handlebars. Offering table widths from 48–96 in., workstation has five 4 in. casters for mobility.'); document.write('
'); document.write('
Scissor Lift and Rotate System offers 2,000 lb capacity.
'); document.write('
'); document.write('With Scissor Lift and Rotate System, users can raise cart containing pallet to proper height while placing product onto pallet and turning cart 360°. System is built with rotate bearing attached to platform below lift, with 4 mounting holes for securing to floor. Heavy-duty bearing can withstand load slamming from forklift trucks. For safety, system offers bolt-on bellows skirt to protect from pinch points, maintenance safety stop, and captured roller wheels to prevent table from tipping.'); document.write('
'); document.write('
Heavy-Duty Curtain Fabrics withstand industrial environments.
'); document.write('
'); document.write('Supplied in 61 ft wide rolls, Duravider and Duravider RS meet flame test standards of California Fire Marshal and NFPA701 Method 2. Duravider RS, RipStop-reinforced fabric, allows repair due to Tri-laminate, which features sequentially-staggered, heavyweight polyester yarns that capture puncture points and prevent them from spreading. Also, composition promotes durability without significantly adding to overall fabric weight. This adds resistance to abrasion and impact.'); document.write('
'); document.write('
Surface Mount Lock Box stores wireless APs.
'); document.write('
'); document.write('Measuring 18 x 12 in x 5 in., Model 1016 features RF-transparent polycarbonate cover, which is virtually transparent to wireless signals. Wall-mountable enclosure has adjustable shelf for components and wire tie-downs to manage data and power wiring. With locking enclosure, network components can be secured away from signal-blocking furniture, dusty shelves, and unauthorized personnel. Unit is suited for modems, wireless routers, small network switches, and network storage.'); document.write('
'); document.write('
DIN Rail Enclosures feature low-profile design.
'); document.write('
'); document.write('Designed to fit TH35 x 7.5 mm rails, RAILTEC B DIN Rail Enclosures come in 2, 4, 6, and 9 module sizes. Each enclosure is molded from PPO (UL 94 V-0) for base and PC (UL 94 V-1) for top section. Fully insulated and protected according to VBG4 and IEC 529/DIN VDE 0470-1, enclosures are suitable for machine building and automotive industry. Customization options include CNC milling and drilling, RFI shielding, silk-screen and tampo printing of legends and logos.'); document.write('
'); document.write('
Polycarbonate Cover protects small electrical units.
'); document.write('
'); document.write('With cover, mounting frame, and piano-style hinge molded of clear polycarbonate material, STI-6519 Single-Gang Cover can protect pushbuttons, electrical switches, digital keypads, electrical outlets, pull stations, biometrics, and volume/lighting controls against vandalism and accidental damage. Frame eliminates need to use appliance mounting plate and mounts directly through product mounting plate to electrical box.'); document.write('
'); document.write('
Wiper Mats feature sustainable design.
'); document.write('
'); document.write('Made from 100% recycled polyethylene terephthalate, EcoPlus Wiper Mats feature non-skid backing that makes them suitable for use in heavily trafficked areas. Crush-resistant mats have raised rubber edging and are effective at removing moisture, soil, and contaminants from shoe bottoms.'); document.write('
'); document.write('
Air Curtain Emulator ensures proper fresh food placement.
'); document.write('
'); document.write('By determining air curtain limits, A.C.E. Reel helps ensure proper fresh food placement in order to reduce spoilage and enhance safety. Users simply attach magnetized end to load line indicator, bunker cooler, or air intake grid at bottom of multi-deck case or frozen cooler and pull reel to air exhaust or honeycomb for measurement. Enabling at-a-glance identification, any displayed product extending past wire is loaded too high and out of cold curtain.'); document.write('
'); document.write('
NEMA 4X Plastic Enclosures suit indoor/outdoor applications.
'); document.write('
'); document.write('Available in 4 additional sizes featuring molded on surface mounting flanges, Series WA, WC, and WP are UL listed to UL508-4X specifications. Electrical enclosures include brass inserts for cover on/off convenience, stainless steel screws, and silicone rubber gasket to protect electronics from harsh environmental factors such as dust, dirt, and water. WC and WP Series are molded in flame-retardant UV stabilized Polycarbonate, while WA Series is molded in flame-retardant ABS plastic.'); document.write('
'); document.write('
Modular Workstation combines multiple assembly operations.
'); document.write('
'); document.write('Eliminating unnecessary steps for assemblers, mobile workstation combines multiple assembly operations into single units. Construction, consisting of Creform plastic coated steel pipe and metal joints, facilitates customization and modification. With 700 lb capacity and average dimensions of 83 x 48 x 61 in., workstation features plastic work surface; skatewheel conveyors; 2-level, L-shaped slide pipe flow rack; 2 return levels; computer monitor; florescent light; and tool balancer.'); document.write('
'); document.write('
Connector Kits suit heavy-duty heat trace installations.
'); document.write('
'); document.write('Designed to fulfill safety standards of NEC hazardous location codes, AX Connection Kits allow oil and gas pipelines, petrochemical plants, food/beverage manufacturers, and power generation facilities to prevent fluids from freezing in pipes, valves, and tanks. Non-metallic, impact-resistant polyester enclosures are rated IP66 and NEMA 4X for corrosive environments. Designed to fit all wattages of Nelson Self-Regulating heating cables, enclosures have reinforced standoffs to prevent cracking.'); document.write('
');