document.write('\'Powered'); document.write('
ThomasNet News® - Paints & Coatings
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Aqueous Liquid Coating System is optimized for usability.
'); document.write('
'); document.write('Targeting those who desire liquid lamination without hand application, EliteCoater™ applies water-based liquid coating to inkjet canvas and fine art paper up to 44 in. wide. Design facilitates installation on any tabletop surface and ensures even finish on any graphic print. Along with process speed of up to 2 fpm, features include drip pan that collects excess coating and ability to coat other media with optional Mayer bar. For operation, users feed cut sheets through coating head.'); document.write('
'); document.write('
Water Resistant Coating withstands elements.
'); document.write('
'); document.write('By imparting water repellency, HydraBan® 430 helps maintain structural integrity of paper and corrugated shipping boxes while they are in service or in transit. This, in turn, helps protect container contents. FDA-compliant, water-based coating, effective for applications where exposure to environmental conditions – cold, heat, humidity, moisture – is unavoidable, is repulpable, printable, and gluable. It can be run with or without dilution and applied off-line, in-line, or via flexo.'); document.write('
'); document.write('
Heat Resistant White Paint resists yellowing up to 1,200°F.
'); document.write('
'); document.write('While not intended for direct contact with flames, Thurmalox® 290-00 Heat Resistant White Paint is designed for vent pipes and other parts exposed to elevated temperatures. Formulation prevents yellowing at up to 1,200°F and will not chip, crack, or peel. Ready-to-use product, suited for various industrial, commercial, and consumer product applications, comes in 5 gal pails, gallons, quarts, and aerosol spray cans and can be used as clear gloss top coat to achieve porcelain-like finish.'); document.write('
'); document.write('
Floor Finish is optimized for accelerated drying and curing time.
'); document.write('
'); document.write('Betco Express® with Scuff Resistant Technology™ (SRT) is formulated with Max-Cure™ Technology, which utilizes durable, internally cross-linked polymer blended to minimize dry and cure times. Also providing black heel mark resistance, this low-odor floor finish can be re-coated in as little as 10–15 min. As many as 6 coats can be applied within 1 hr.'); document.write('
'); document.write('
Formable Texturing Lacquer targets automotive interior components.
'); document.write('
'); document.write('Intended for use by automotive component designers, Fototex 3D enables manufacture of fully formed 3D parts with customizable surface textures. This texturing lacquer, applied as part of normal screen printing process using hybrid (solvent and UV) cure, exhibits abrasion resistance, does not require 2-component hardening, and enables high gloss finishes with textures and textured effects. Versatility and fine line print capability enable intricate texturing patterns to be created.'); document.write('
'); document.write('
Acrylic Modified Polyester Resin is used for coating surfboards.
'); document.write('
'); document.write('Silmar® SIL66BE-2880 has undergone QUV tests is suitable for surfboard laminating. Formulated to be tough, resin minimizes occurrence of compression dimples and exhibits impact resistance that helps reduce stress and deck cracks. Product cures water clear and also exhibits accelerated wet out of glass.'); document.write('
'); document.write('
Silicone Curative optimizes epoxy polysiloxane topcoats.
'); document.write('
'); document.write('Designed to optimize durable flexibility of epoxy polysiloxane protective topcoats in marine applications, without sacrificing weatherability, SiVance® C1008 Curative solves problems of brittleness and cracking that can develop over time as coating cures. Product is fully miscible with hydrogenated bisphenol-A epoxy resins. In addition to marine applications, C1008 is suited for coatings used on piping, bridges, wind turbines, offshore platforms, structural steel, and heavy equipment.'); document.write('
'); document.write('
Optically Clear Hard Coating increases lens durability, film life.
'); document.write('
'); document.write('Engineered for resistance to scratches, abrasion, and chemicals, OC-4122 UV-curable, optically clear, hard coating for polycarbonate lenses is suited for use with such film substrates as PC, PET, TAC, and PMMA. Surface energy prevents materials from readily adhering to cured coating, resulting in non-stick or self-cleaning surface, while transparency and low haze characteristics maintain optical clarity over time. This 100% solids hard coating cures tack free when exposed to UV light.'); document.write('
'); document.write('
Dendrictic Oligomers exhibit chemical, temperature resistance.
'); document.write('
'); document.write('Offering optimized mechanical and physical properties in hard protective coatings, Bomar™ dendritic oligomers exhibit acid and chemical resistance and suit high-temperature, low-viscosity ink applications. Products cure tack free at rate that accelerates processing without defects from early handling. Designed for low shrinkage, oligomers ensure complete, uniform coverage of substrates and adhere to ABS, acrylic, aluminum, glass, polycarbonate, PMMA, polyester, and stainless steel.'); document.write('
'); document.write('
Optically Clear Hard Coating targets PET and PMMA films.
'); document.write('
'); document.write('Engineered for scratch, abrasion, and chemical resistance, OC-3021 Hard Coating is typically used in manufacture of electronic touch panels, LCD polarized displays, and polarized sunglasses, safety glasses, and goggles. Low surface energy prevents materials from easily adhering to cured coating, resulting in non-stick or self-cleaning surface. Offering optimized transparency and low haze characteristics, 100% solids coating cures tack-free when exposed to UV light.'); document.write('
'); document.write('
Paint Finish mimics look and feel of natural terra cotta.
'); document.write('
'); document.write('Available on aluminum wall panels, Terra Cotta Paint Finish utilizes 70% PVDF resin-based coating to achieve optimal performance in exterior environments and texture additive to help replicate natural feel of terra cotta. Product comes in 4 color choices, meets requirements of AAMA 2605-13, and is tested to exhibit resistance to humidity, color change, chalk, gloss loss, and chemicals.'); document.write('
'); document.write('
White Reflective Coating suits LED lighting applications.
'); document.write('
'); document.write('Designed to spray onto almost any surface, CI-2001 White Reflective Silicone Coating forms tough layer with internal high reflectivity. Product delivers optimized mechanical, thermal, and optical stability at elevated temperatures, allowing LED lamp and luminaire components to maintain high reflectivity as well as consistent color and structural performance over lifetime.'); document.write('
'); document.write('
Electron Beam Metallization System suits 100 and 150 mm wafers.
'); document.write('
'); document.write('Designed for lift-off compound semiconductor applications, Temescal UEFC-4900 offers benefits of Auratus™ Deposition Process Enhancement Methodology, producing near-perfect uniformity while cutting material consumption. Conical shaped vacuum chamber maximizes wafer capacity, while High-Uniformity Lift-off Assembly design uses dual-axis motion to optimize collection efficiency. With pumping capacity of 39,000 L/sec, UEFC-4900 can process up to 25 150 mm wafers/batch.'); document.write('
'); document.write('
Paint Booth Wall Coating protects against overspray.
'); document.write('
'); document.write('Designed for spray-on application and peel-off removal, water-based DeVilbiss CLEAN™ Booth Wall Coat produces white coating that protects paint booth surfaces from overspray to ensure clean and bright walls. Product can be used on painted or galvanized metal surfaces and lasts 500 bake cycles or 6 months. To cover typical 30 ft spray booth, 3–4 gal will be required. Use with gravity- and pressure-fed spray equipment with respective 1.8 and 1.5 mm or larger fluid tip is recommended.'); document.write('
'); document.write('
Cylinder Rod Coating is set to replace hard chrome coatings.
'); document.write('
'); document.write('Consisting of Tungsten Chromium Carbide compound, COREX Coating provides hardness up to 1400 Hv and bond strength of less than 10,000 psi, optimizing duration and durability of cylinders and pistons. Product utilizes thermal spraying techniques to spray large surface areas with thick coating, cutting application time and providing continuous surface. COREX porosity is less than 1% with no micro-cracks associated with HCP that can lead to corrosion.'); document.write('
'); document.write('
Digital Press Primer improves Xeikon print quality.
'); document.write('
'); document.write('Formulated for use on Xeikon digital presses, DigiPrime® 4453 water-based, water-resistant primer promotes adhesion of Xeikon electrophotographic toners to diverse paper and film substrates. This 100% aqueous product, designed to improve ink receptivity, rub resistance, and image quality on printed materials, is approved for direct and indirect food contact in Europe and USA and does not yellow or lose its print receptivity over time.'); document.write('
'); document.write('
Oleophobic/Hydrophobic Coating enhances display glass durability.
'); document.write('
'); document.write('To enhance performance and longevity of anti-reflective (AR) coated cover glass for displays, CleanVue PRO™ protective coating repels dirt, dust, water, grease, and oil. Properties also provide protection against scratching and allow repeated removal of fingerprints while maintaining display\'s anti-reflective properties. Compliant with MIL-C-675C, coating\'s oleophobic and hydrophobic water repelling characteristics did not breakdown or degrade after abrasion testing.'); document.write('
'); document.write('
Safety Glasses Cleaning Solutions have anti-fog/-static formula.
'); document.write('
'); document.write('Available as spray solution packaged with soft, non-abrasive tissues or as single-use towelettes, Kleen View® lens cleaning products feature fast-drying, silicone-free formula that includes anti-fog, anti-static ingredient that helps extend life of safety glasses. Using these products to clean protective eyewear counteracts unintentional wiping off of original anti-scratch and anti-fog coatings applied to lens surface. Also, anti-static properties promote dust and dirt resistance.'); document.write('
'); document.write('
Extrusion Coating System meets AAMA 2605-13 specifications.
'); document.write('
'); document.write('Consisting of color coat and clear coat, Acropon® 2605 Extrusion Coating System is spray-applied to extruded aluminum products, such as storefronts, entrances, windows, and handrails. System offers wide color palette and gloss levels ranging from 30–70 for both interior and exterior applications. Coating meets or exceeds AAMA 2605-13 specifications for 10-year South Florida exposure weathering conditions and resistance to salt spray, chalking, and fading.'); document.write('
'); document.write('
Multi-Surface Primer and Sealer promotes adhesion.
'); document.write('
'); document.write('Available in project size 2-gal bucket, KILZ® HIDE-ALL™ helps prepare surfaces for painting and evens permeability. High-hiding latex primer sealer helps minimize issues caused by dark colors and minor surface stains to create consistent canvas for desired finish. Able to be top-coated after 1 hr with latex or oil-based paint, product is suited for use on interior surfaces, including drywall, cured plaster, woodwork, masonry, concrete block, brick, and previously painted areas.'); document.write('
');