document.write('\'Powered'); document.write('
ThomasNet News® - HVAC
'); document.write('
ThomasNet News® is a service of ThomasNet.com
'); document.write('
Dual Tower CPU Cooler provides quiet operation.
'); document.write('
'); document.write('Featuring 150 mm wide fin-stack and widely spaced heatpipes, Model NH-D15 enables uniform heat distribution for optimal efficiency. Recessed lower fins enable NH-D15 to provide 64 mm clearance for tall memory heatsinks in single fan mode. Cooler also features pro-grade SecuFirm2™ multi-socket mounting system and NF-A15 fans that support PWM for automatic speed control through mainboard. Using supplied Low-Noise Adapter, max fan speed can be reduced to 1,200 rpm for quieter operation.'); document.write('
'); document.write('
Electrical Cabinet Coolers are resistant to heat and dirt.
'); document.write('
'); document.write('By circulating 20°F air throughout electrical enclosures in hot, remote, and/or dirty environments, NEMA 12 Cabinet Cooler® Systems prevent high temperature malfunctions. Cooling capacity of up to 275 Btu/hr suits small electrical enclosures with problematic overheating, and models with 550 Btu/hr capacities are also available. Mounting through standard electrical knockout while maintaining NEMA 12/4/4X rating of enclosure, maintenance-free systems do not have any moving parts.'); document.write('
'); document.write('
Vibration Sensors are designed for high-temperature operation.
'); document.write('
'); document.write('Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating, series features rugged housing and hermetic sealing that protect against ground loops and RFI.<br />'); document.write(''); document.write('
'); document.write('
Inline Flow Sensors suit lubrication and pneumatic systems.
'); document.write('
'); document.write('Made of brass or all SST, Model 1600 detects factory set points from .1–1.5 gpm in water. Model 1700 has set points as low as 1 cc/min in water. Both models handle various liquids to ensure adequate flow of coolant, lubrication, or injections of chemicals. Designed to also operate in pneumatic systems, set points of 2–8 scfm help ensure adequate air or gas flow is present. Along with standard ¼ in. FNPT process connections, features include max operating ranges up to 1,000 psig and 301°F.'); document.write('
'); document.write('
Brushless Blowers include full-wave electronic controller.
'); document.write('
'); document.write('Powered by 1.7 in. brushless 12 or 24 Vdc motor, MICROjammer® Series is available in sizes from 3.0–5.1 in., each providing unique aerodynamic operating characteristics for custom fit. Variable-speed blowers deliver up to 50 in. w.c. of static pressure and achieve airflow levels of 26 cfm. Allowing virtually 0-100% total speed variation, full-wave commutating electronics optimize blowers by providing protection features, functional options such as tachometer input, and customization potential.'); document.write('
'); document.write('
Isolation Room and Fume Hood Controllers are BTL listed.
'); document.write('
'); document.write('Awarded BACnet Testing Laboratories Mark from BACnet International, FMS Isolation Room Controllers and HMS Fume Hood Controllers feature intuitive touchscreens and are used in labs and hospitals. Models FMS-1655 and HMS-1655 utilize Safety Halo™, providing both visual and audible alarms, and edge lighting allows users to instantaneously monitor status of multiple rooms and fume hoods.'); document.write('
'); document.write('
Rooftop HVAC Units target light commercial applications.
'); document.write('
'); document.write('Available in gas/electric and electric/electric models ranging from 3–12.5 tons, Raider® Rooftop Units are built to fit most curb sizes, virtually eliminating need for adapter curb on many replacement jobs. Units offer efficiency levels up to 13 SEER, 11.5 EER, and 13.2 IEER. Optional MSAV® supply fan optimizes energy efficiency by matching fan speed with compressor demand, while field- or factory-installed BACnet® option offers seamless integration with building automation systems.'); document.write('
'); document.write('
Thermal Conditioning System controls bed temperature.
'); document.write('
'); document.write('Installed in mattresses, Heat Vent Sleep System uses active heating and passive ventilation cooling to create micro-climate for each side of bed via individual remotes. This saves energy by conditioning bed rather than entire room. For home furniture, Climate Control System allows for 3 levels of active heating and active cooling via wired remote and is available for single or dual surfaces.'); document.write('
'); document.write('
Under-Cabinet Ventilation Systems offer 3-step installation.
'); document.write('
'); document.write('Under-cabinet hoods include 3-step Flex Install System (FIT System), which eliminates need for measuring and cutting, and can be installed by one person in ~10 min. Available in white, black, and stainless finishes, hoods integrate into new and existing kitchens and come in 30 and 36 in. models that can be installed vented or unvented.'); document.write('
'); document.write('
Modular Cooling Systems offer 5,000-50,000 W capacity.
'); document.write('
'); document.write('Using cooling efficiency of water, HP MCS 100 and 200 provide front-to back cooling of fully populated high-density racks, keeping them hot-spot free and minimizing overall heat load on data center. As servers expel warm exhaust air out rear of rack, fan modules re-direct warm air into heat exchanger module. Air is re-cooled and then re-circulated to front of rack. HP MCS 100 offers 5,000–35,000 W of capacity, while HP MCS 200 offers 10,000–50,000 W. Each is capable of cooling 1 or 2 racks.'); document.write('
'); document.write('
RTD Temperature Sensors feature -58 to +248°F range.
'); document.write('
'); document.write('Featuring molded IP67 4-pin connector with M12 male thread, RTDM12 Series offers response time of less than 5 sec. RTD plug sensors are suited for pressure vessels, pressurized containers, and applications requiring temperature sensor with NPT mounting fitting. Single element design has 1/8 in. diameter, 316 stainless steel probe that extends 0.51 or 0.94 in. from 1/8 NPT mounting thread. Sensors are typically used in chemical, water, and automotive industries.'); document.write('
'); document.write('
Magnetic Inductive Flow Sensor provides ±1% accuracy.
'); document.write('
'); document.write('Unlike sensors with moving parts, Series MFS2 can measure contaminated media in ½, ¾, 1, or 1 ¼ in. diameter pipes. Electromagnetic PVDF flowmeter is available for flow ranges from 0.02–66 gpm. Any change in temperature, density, viscosity, concentration, or electrical conductivity does not affect output signal. Providing obstruction-free pipe cross section, Series MFS2 is suitable for accurate reversible gauging of volume flow of conductive liquids in closed piping.'); document.write('
'); document.write('
RFID Temperature Sensor Tag features battery-free design.
'); document.write('
'); document.write('Capable of transmitting unique identifier and associated temperature measurement data to commercial EPC C1G2 reader without battery on sensor tag, Pyros-TGT2-DWB features 103GT-2 NTC thermistor from Semitec with measurement range from -10 to +120°C and accuracy of ±0.5°C. Unit also offers extended temperature range from -30 to +300°C with accuracy of ±3°C. Offering reading distance of 5 ft, tag comes in variety of antenna designs to adapt performance to application in 860-960 MHz band.'); document.write('
'); document.write('
Retrofit Packages prevent engine under- and over-cooling.
'); document.write('
'); document.write('Effective in all climates, Modulator® Fully Variable Retrofit Packages deliver optimized engine cooling. Packages replace on/off fan drives for heavy-duty, line-haul and severe-duty, vocational trucks where pneumatically actuated fan clutches over-cycle or do not provide optimum performance. Functionality promotes accelerated cab warm-up, efficient air-conditioning, and quiet operation while maximizing engine power to vehicle drive wheels and improving fuel conservation.'); document.write('
'); document.write('
Hot Fume/Gas Extractor Ducting has flexible, lightweight design.
'); document.write('
'); document.write('Used for ducting of hot fumes and gases, HotFlex is made from silicon-coated glass fabric and handles temperatures from -60 to +300°C while remaining flexible and strong. Flame-retardant product, featuring abrasion-resistant outer helix and axial compressibility, comes in silver grey color and in 10 m rolls or cut to length. Weighing from 400 g/m to 3.1 kg/m, ducting offers bend radii from 30–280 mm, max work pressure of 0.85–0.03 bar, and max vacuum from 0.32 to 0.01 bar.'); document.write('
'); document.write('
Fume Extractor features mobile design for occasional use.
'); document.write('
'); document.write('Specifically designed for low amounts of dust, Smart Master features rotatable and swiveling exhaust hood that enables use in 360° radius. W3 approval make welding fume filter system suitable for welding chrome, nickel, and steel. Instead of exhaust arm, SmartMaster can also be connected by hose below welding table, so that suction of smoke particles is carried out directly at source. Three-stage disposable filter ensures clean air when welding with maximum suction capacity of 950 m³/h.'); document.write('
'); document.write('
Explosion Proof Air Heaters range from 5-30 kW.
'); document.write('
'); document.write('Certified to ATEX and IECEx requirements, AEU1 Series Electric Air Heaters provide primary or supplementary heating for comfort or freeze protection in hazardous locations. Units include ExCaliber™ liquid-to-air heat exchanger cores, which are available in fourteen 400 V, 50 Hz models and fourteen 480 V, 60 Hz models. Housed in 14-gauge steel cabinet with epoxy/polyester powder coating, AEU1 Series incorporates immersion heater, IEC motor, cable glands, and O-rings to minimize moisture ingress.'); document.write('
'); document.write('
Fabric Duct provides low clearance HVAC ventilation.
'); document.write('
'); document.write('Measuring 47–93 in. wide and 11–22 in. high, oval-shaped OvalSox™ Fabric Duct retains inflated shape even during idle air handling periods with polyester ropes and supportive fiberglass rods for structural integrity. Six 3/16 in. diameter ropes are sewn into fabric interior at 9–14 in. increments, which provides pleated effect. Additionally, 3/8 in. diameter corrosion-proof white fiberglass rods are attached via sewn-in clips atop fabric surface to accentuate inflated appearance.'); document.write('
'); document.write('
Hydration Packs help combat worker heat stress.
'); document.write('
'); document.write('Offering 600D water-resistant polyester shell with 2 L bladder, Chill-Its® Hydration Series provides on-the-go hydration solution for workers in extreme environments. Closed cell insulation keeps water cool for hours while TPE polymer bladder maintains taste of water. Shoulder straps are vented for breathability and have 8 mm EVA foam padding for comfort. For workers who need added protection of staying seen on the job, 5155HV model is available in hi-vis orange as well as lime.'); document.write('
'); document.write('
Liquid Cold Plates cool power electronics.
'); document.write('
'); document.write('Able to fit most standard IGBT modules, XtremeChill™ Cold Plates utilize advanced oblique fin patented technology, which offers thermal cooling and heating with no pressure drop. Disruptive technology introduces continuous interruption of thermal boundary layer, which promotes enhanced fluid mixture. In addition to maximizing cooling in very compact package, plates enable spot cooling and maintain uniform module temperature.'); document.write('
');