Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jul 20, 2012 Metalshield® MC®-90 and MC®-110 produce strong, tough, and H4 diffusible hydrogen weld deposits required in applications such as heavy equipment and crane fabrication. Along with arc stability and minimal spatter, wires exhibit low temperature impact properties that include ability to exceed 30 ft·lbf @ -60°F according to Charpy V-Notch test results. Deoxidizing agents minimize pre- and post-weld clean up, while silicon island management minimizes slag and facilitates slag removal.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
Jun 22, 2012 Measuring oxygen levels down to 100 ppm, PurgEye® 100 is adequate for most stainless steels. PurgEye® 300 measures oxygen down to 10 ppm and has integral software to record oxygen levels throughout purging cycle. PurgEye® 500 has all features of PurgEye® 300, plus integral pump that continuously extracts samples of gas from volume being purged for analysis. PurgEye® 600, measuring from Atmosphere to 10 ppm, integrates measuring system with touchscreen and internal recording of data.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jun 11, 2012 Delivering flat bead face when used in all positions, UltraCore® HD-M is 75% Argon/25% CO2 gas-shielded flux-cored wire that features fast freezing slag and provides deposition rates of more than 10 lb/hr. Wire is available in 15, 33, and 50 lb packages and in standard diameters of .045, .052, and 1/16 in. UltraCore® HD-M conforms to AWS A5.20/A5.20M: E71T-1M/9M-H8 classification and is ABS approved to 3YSA H10.

Hobart Brothers Co.    Troy, OH 45373-2900
Apr 27, 2012 Offered in .045, .052, and 1/16 in. dia, Hobart® FabCOR® Edge MC wire features silicon control technology that helps minimize silicon island deposits and reduces need for post-weld cleaning. Deposition rates can increase productivity up to 30% in constant voltage (CV) applications, and higher rates can be achieved when used with power source offering pulsing capabilities. Wetting characteristics help create smooth, flat weld beads with uniform fusion and smooth, stable arc.

Sumner Mfg. Co.    Houston, TX 77088 4036
Apr 17, 2012 With positive ground and firm hold, Rotary Internal Ground Clamp keeps ground wire stationary as pipe rotates in welding applications. Brass product, able to be used horizontally or vertically with manual, semi-automatic, or fully automatic welding applications, has 3 mandrels that provide contact to pipe ID. C-type rotary ground incorporates stationary and movable contact plate that rotates 360°, positive anti-arc bearings take loads up to 500 A.

Hobart Brothers Co.    Troy, OH 45373-2900
Apr 09, 2012 Designed for optimal weld quality on offshore drilling rig applications and jack-up rig fabrication, FabCO® 712M welding wire has less than 4 ml diffusible hydrogen per 100 g of weldment. This decreases chance of underbead cracking and can lessen requisite preheating, while degree of moisture pickup minimizes chance of hydrogen entering weld after exposure to atmosphere. Supplied in 0.045 and 0.052 in. dia, wire has tensile strength of 83 ksi in as-welded condition and 80 ksi after PWHT.

Weldcraft    Appleton, WI 54911
Mar 20, 2012 Compatible with 13N front-end consumables, Model WP-280 includes Super Cool(TM) Technology, anti-rotation feature to prevent handle movement during welding, and Tri-Flex(TM) hose and cable assembly that remains flexible in cold weather. Copper components maximize current capacity, while high-temperature silicone rubber insulation protects against high-frequency voltage leaks. To facilitate torch installation, ColorSmart(TM) hose and cable sets differentiate input water, water/power cable, and gas hoses.

Weldcraft    Appleton, WI 54911
Feb 13, 2012 Available in 7 in. lengths and 5 diameters of 0.040, 1/16, 3/32, 1/8, and 5/32 in., Tungsten Electrodes come in 2% lanthanated and zirconiated versions. Two percent lanthanated electrodes, providing substitute for 2% thoriated tungsten electrodes, offer minimized tip erosion. Zirconiated tungsten electrodes resist spitting in high current applications, minimizing opportunity for contamination. Units also ball up in AC applications, ensuring smooth arc.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Dec 15, 2011 Available in 5 models, FILTAIR Industrial Centralized Weld Fume Extraction Series is customizable to variety of welding cells and applications. Units combine TruLock(TM) Filter technology with MERV 15 nanofiber filter pack to capture up to 95% of particles ranging from 0.2 to 1 micron. TruLock technology uses surface webbing of small fibers to capture weld fumes on surface. To extend filter pack life, systems include online and offline Linear Jet Automatic Cleaning System.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Dec 02, 2011 Designed for welding in narrow TKY joints and poor fit-up conditions, Innershield® NR-440Ni2 features optimal toe wash-in and is capable of delivering flat bead face when used in vertical-up or vertical-down welding applications. Wire meets H8 diffusible hydrogen requirements over range of humidity levels. Available in 5/64 in. diameter on 14 lb coils, product is hermetically sealed in ProTech® packaging for moisture resistance.

Sumner Mfg. Co.    Houston, TX 77088 4036
Nov 29, 2011 Designed to secure ¾-6 in. diameter pipe to standard vee head pipe stands, Hold-E steel frame pipe clamp is equipped with quick release button that allows welder to open and close gripping arms in seconds. After positioning ram, few turns of feed screw secures pipe or tubing to jack stand. Measuring 10.31 x 2.12 x 15.75 in. in stored position, clamp is suitable for holding pipe during flange fit-up or when fabricating pipe with branches.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Nov 11, 2011 Delivering flat, well washed beads with minimal weaving, Select 410-AP all position wire welds straight 410 SS while providing corrosion and oxidation resistance up to 1,200°F. Select 410NiMo, featuring nominal weld metal composition of 12% chromium, 4.5% nickel, 0.6% molybdenum, and max carbon content of 0.06%, delivers smooth stable arc with low spatter residue and well washed beads. Both gas-shielded, flux cored electrodes are available in .045 in. and 1/16 in. diameters.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Oct 10, 2011 Available in .045 and 1/16 in. diameters, SelectAlloy 16-8-2 Electrodes are composed of 15.5% chromium, 8.5% nickel, and 1.5% molybdenum. Flux cored SelectAlloy 16-8-2-AP, designed to weld in all positions, delivers flat, well washed beads, while metal cored SelectAlloy 16-8-2-C wire provides smooth, spray arc transfer and produces little or no slag. Both gas-shielded electrodes are suitable for welding 16-8-2, 316, and 347 grades of stainless steel in high-temperature piping systems.

ABB Robotics, Inc.    Auburn Hills, MI 48326
Oct 06, 2011 Fully configured ArcPack(TM) Lean 1410 includes IRB 1410 robot, IRC5 Compact controller, Fronius TransSteel 3500 power supply and wire feeder, and Tregaskiss 500 Amp air-cooled welding torch. Six-axis robot, specially designed for arc welding, features 5 kg handling capacity with supplementary 18 kg load capacity on upper arm for application equipment. With positional repeatability of ±0.025 mm, IRB 1410 delivers optimal welds in tight, restricted locations.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Oct 04, 2011 With adjustable, locking handle and marked detents every 45° for accuracy, Pivoting Welding Angle lets welders set up and hold steel in angles from 22° to 270°. Magswitch® On/Off technology eliminates effects of magnetic field during setup while also promoting placement precision and non-marring hold on workpiece. Tool offers work holding capability on 3 sides of each magnet, with 200 lb holding value, and accommodates flat or round steel.

Reis Robotics    Elgin, IL 60123
Sep 30, 2011 Allowing robotic welding even for short production runs, completely enclosed and movable welding cell consists of 6-axis RV10-6 vertical articulated arm robot, high-capacity RobotStarV control, and 2 freely programmable additional axes. Welding robot, which may be arranged upright or suspended overhead, has payload capacity of 13.23 lb and repeatability of 0.002 in. All supply, exhaust, and safety requirements are integrated within cell, which occupies 32.8 feet² floor space.

Hobart Brothers Co.    Troy, OH 45373-2900
Sep 14, 2011 Designed for welding in flat and horizontal positions, Metalloy® 71 SG features high deoxidizer levels capable of welding through mill scale. Optimized wetting characteristics ensure smooth weld beads with uniform tie-in and help minimize weld defects and associated rework. By generating low hydrogen weld deposit of 3.3 mL per 100 g of weldment, gas shielded metal-cored wire helps mitigate cracking. Metalloy® 71 SG comes in .045 in. diameter and provides tensile strength from 70-87 ksi.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 30, 2011 Offering alternative to push-pull system, Circulator(TM) helps maintain clean work environment by reducing dust and dirt in operator and surrounding work areas. It is intended to supplement existing source extraction system or natural and/or forced ventilation systems. Green-Drive(TM) control system features pressure sensor that continually monitors system operation and adjusts airflow to maintain required performance levels, which saves energy when compared with on/off systems.

Hypertherm, Inc.    Hanover, NH 03755 0010
Aug 10, 2011 Approved for Powermax1650®, Powermax1000®, and Powermax1250® systems, Duramax(TM) retrofit torches include HRTs straight torch that is suited for handheld cutting and can be used in hard-to-reach areas. Designed for 40-100 A cutting/gouging with 25 and 50 ft torch lead options, torches come with impact-resistant, fiber-reinforced handles. Conical Flow(TM) nozzle and spring electrode technology help extended consumable life. Convertible machine torch and 75° torch are also available.

Hobart Brothers Co.    Troy, OH 45373-2900
Jul 28, 2011 Available in both 1/16 and 5/64 in. diameters, self-shielded Fabshield® 79T8(TM) and 79T8 Ni2(TM) provide out-of-position welding capabilities and generate fast-freezing, self-peeling slag to minimize clean-up time. Low temperature impact values keep welds ductile and prevent cracking. Fabshield 79T8 provides Charpy V-Notch (CVN) property of 135 lb-ft at -40°F/°C for 5/64 in. diameter, while Fabshield 79T8 Ni2 offers 96 lb-ft CVN for same diameter at same temperatures.