Hobart Brothers Co.
Troy, OH 45373-2900
Jan 17, 2008 Measuring 35 in. tall with 23 in. dia, 900 lb X-Pak is made from 100% recyclable fiber and includes 23 in. chimeless cone. Wire offered with drum includes Tri-Mark® Metalloy® Vantage(TM) and Metalloy 76; Hobart® Fabcor® 86R; and Corex® Metal-Cor Maxim(TM) and Metal-Cor 6 in .045 and .052 in. dia. Optional overhead lifting device works on CAM action that stabilizes drum during transport and attaches to overhead hoist or fork on lift truck.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 26, 2007 Designed for those who perform occasional aluminum welding, Spoolmate 100 Series plugs directly into Millermatic® 140, Millermatic 140 with Auto-Set(TM), or Millermatic 180 MIG welder without requiring separate control box. Recessed contact tip and clear spool cover help reduce number of burnbacks, while dual V-knurled drive rolls ensure consistent feeding of aluminum. Unit comes with 12 ft gun cable and lets users adjust drive roll tension to match wire being used.

North Safety Products, Inc.
Cranston, RI 02920
Jul 11, 2007 Suited for use when welding alloys or exotic steel, Model 75FFP100NL is NIOSH approved flexible filter offering P100 protection and 3-in-1 nuisance-level odor relief from organic vapors, acid gases, and ozone. Designed to fit under welding helmets and faceshields, filter can be combined with 7700 half mask to provide low breathing resistance and to reduce worker fatigue.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Mar 26, 2007 Featuring 4-stage filtration process, Miniflex(TM) high-vacuum, low-volume system includes LongLife-H® and secondary HEPA filters that offer abundant capacity to handle common light and medium duty arc welding applications. Unit automatically switches on when arc is established with 15 sec delay upon completion of welding. Weighing 33 lb, unit is powered by two 1.34 hp motors, and comes with standard wheel set and optional wall-mounting bracket.

Western Enterprises
Westlake, OH 44145
Mar 13, 2007 Designed for use in oxy-fuel cutting or welding, Caliber(TM) brass flashback arrestors feature nickel-plated finish that promotes surface hardness and corrosion resistance. Tools also employ soft seat Buna Nitrile O-ring connections that lend to product life and seal integrity. Able to stop flashback flame and reverse flow of gases, torch and regulator styles have 10 in. max cutting capacity and are intended for industries with humid or salty environments.

Weldcraft
Appleton, WI 54911
Feb 13, 2007 All-in-one AK-150MF Kit allows operators to convert standard 17F or 17FV TIG torch into 20 different torch styles using existing cable. It includes 200 A/70° head, 200 A/180° head, 125 A/90° head, 125 A/180° head, and 80 A/90° head, as well as molded coil element, solid element, torch body without valve, torch body with valve, and ribbed handle. Removable head and coil combination unit eliminates multiple connection points to prevent overheating and high frequency leaks.

Thermadyne Industries, Inc.
St. Louis, MO 63017
Feb 13, 2007 Consisting of flexible ball and socket joint, Flexible Conductor Tube enables user to achieve virtually infinite adjustment and firm positioning of conductor tube. Each tube offers series of mechanical connections that allow gradual bending of tube to any angle from straight out of MIG gun to max of 80°. Available in 3- or 4-connector designs, product does not suffer from early fatigue-related failure after repeated re-adjustment to new positions by operator.

Victor Equipment Co.
Denton, TX 76202
Feb 06, 2007 Designed for extra heavy-duty use, Victor® Journeyman AF (Alternate Fuel) outfit can be used with propane, propylene, or MAPP (methylacetylene-propadiene). It comes with oxygen and fuel gas regulators, both with steel gauge guards. Other components include replaceable, built in reverse flow check valves and flashback arrestors; cutting attachment; and equal pressure multi-fuel mixer. Also provided, 8T55 rose bud assembly will effectively operate with any alternative fuel gas.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Oct 24, 2006 Featuring 1/20,000 sec reaction time, Mexican Flag helmet does not need on/off switch, eliminating arc flash caused by forgetting to turn it on. Grinding Mode function keeps helmet in #4 light state, providing continuous UV and IR protection, and prevents darkening of lens from grinding sparks. Weighing 18 oz, helmet includes 4 arc sensors, replaceable batteries with solar assist (30,000 hr on MIG), and handles DC Inverter and TIG applications up to 5 A.

Weldcraft
Appleton, WI 54911
Oct 09, 2006 Four air-cooled TIG torch packages are available with rubber cables for applications from 150-200 A, while 2 water-cooled TIG torch packages are offered for applications up to 250 or 350 A. Each package contains 25 ft power cable and cable cover, power cable adapter, and 15 ft ground cable. Water and gas hoses are also provided, as required, along with Smith Equipment flow meter regulator and welding accessory kit with nozzles, collets, collet bodies, and tungsten.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Sep 19, 2006 Designed for intermittent and continuous removal of welding dust, smoke, and fumes, Mobiflex(TM) securely filters contaminated air and re-circulates it into work area. Rear wheels and front casters promote portability, while 10 or 13 ft long extraction arms lend to application flexibility. Mobiflex(TM) 200-M captures welding fumes inside LongLife® filter, which is changed out by hand. Mobiflex(TM) 400-MS uses RotaPulse® self-cleaning filter process.

3M Company / Bonding Systems Division
St. Paul, MN 55144
Sep 13, 2006 Constructed with multiple-layer liquid-crystal filters, 3M(TM) Speedglas(TM) Model 9002D is suggested for MIG, Stick, and TIG welding at more than 20 A. It offers dual shade selection of 10-11 with light state shade 3 for visibility during welding preparation, cleaning, and inspection. Low or normal sensitivity setting is used with most types of welding, while high position provides arc detection for most TIG processes at amperages down to 20 A.

Thermadyne Industries, Inc.
St. Louis, MO 63017
Sep 08, 2006 MIG gun front end conversion kits, available for Miller®, Bernard®, OXO®, ESAB®, Tregaskiss®, and other makes, enable welders with non-Tweco guns to use Genuine Tweco consumable parts. Each kit contains assortment of consumables to complete conversion: 2 diffusers, 3 extended life contact tips, and one heavy duty brass nozzle. Also included, insert card has tip diagram as well as contact tip, nozzle, and diffuser part numbers.

Universal Flow Monitors, Inc.
Hazel Park, MI 48030
Jul 19, 2006 DeltaPoint® tip-loss monitors with DeviceNet interface feature vortex shedding flowmeters that measure water flow in and out and compare flow rate and temp. Device can monitor 13 welding tips and will alert robot to stop welding if leak is detected. Monitors accommodate cooling flows to 12 gpm and water temp to 230°F. Featuring remote shutoff and restart, device is programmable for leak rate alarm, time or restart delay, temp fault level, flow okay, and minimum flow indication.

Wilson Industries, Inc.
Pomona, CA 91768-3278
Jun 08, 2006 Featuring wrap-around curtain design, Stur-D-Screen includes bracket with self-strengthening capability, as well as hinge and wrap-around gusset for flexibility of singular modules. Hinge system allows single panels to be assembled into multi-panel configurations. Feet can be painted yellow for safety.

Thermadyne Industries, Inc.
St. Louis, MO 63017
May 30, 2006 Air Acetylene Deluxe Tote Kits provide everything needed for brazing ¾ in. with MC Tank or soldering 2 in. tubing with B tank. Both feature Extreme® self-lighting tip and Extreme® standard tip in addition to ergonomic handle with quick disconnect and tank tote that stores hose as well as additional tips. MC Extreme Air Acetylene Kit, constructed of steel, fits MC tank or MT-1 Mapp® tank, while B-Tote Extreme Air Acetylene Kit features composite construction and fits B tanks.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
May 12, 2006 Part of Big Window Elite(TM) Series, '29 Roadster employs 4 independent arc sensors for continuous arc-sensing in welding applications. Its No. 4 ultra-clear light-state facilitates setup and repositioning of hands and parts while providing continuous UV and IR protection. Helmet features Performance Series Lens technology, including replaceable batteries with solar assist for 3,000 hr life (MIG) without recharge. Product also handles DC Inverter and TIG applications up to 5 A.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
May 12, 2006 Offered in Joker and Camouflage styles, Elite(TM) welding helmets utilize 4 independent arc sensors for continuous arc-sensing capability in demanding applications. No. 4 ultra-clear light-state facilitates setup and repositioning of hands and parts while providing continuous UV and IR protection. Performance Series Lens technology includes replaceable batteries with solar assist for 3,000 hr life (MIG) without recharge. Helmets also handle DC Inverter and TIG applications up to 5 A.

PHD, Inc.
Fort Wayne, IN 46899
May 04, 2006 Series PLM, available in pin sizes 13, 16, 20, and 25 mm, is pneumatically powered actuator that locates, clamps, and supports parts in welding applications. Clamp mounts to robots and is fully enclosed to provide protection against weld slag and other contaminants. Built-in locking mechanism holds panel in place and standard manual unlock allows part retrieval if air pressure is lost or removed. Part support height adjusts with NAAMS(TM) shims.

Valtra, Inc./Good Hand, Inc.
Pico Rivera, CA 90660
Mar 30, 2006 Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong Hand® Plier or 1,000 lb using Strong Hand® Sliding Arm Clamp.