Hobart Brothers Co.
Troy, OH 45373-2900
Nov 18, 2009 Usable with 75% Argon/25% CO2 or 98% Argon/2 % O2 shielding gas mixtures, Tri-Mark® Metalloy® 80N1 provides tensile strengths ranging from 85,900 to 90,000 psi, respectively. Wire is designed for both single- and multi-pass welding on 1/2 Ni-1/4 Mo, 1 Ni-1/4 MO, and 1-1/2 Ni-1/2 Mo steels. It can also be used for welding weathering steel applications where color match is not critical. Available in .045, .052, and 1/16 in. diameters, wire handles temperatures down to -50°F.

Hobart Brothers Co.
Troy, OH 45373-2900
Nov 17, 2009 Offering all-position welding capabilities, FabCO® XTREME B2, XTREME B3, and XTREME 120 operate on DCEN Direct Current Electrode Negative. XTREME B2 is suited for 1 ¼ Chrome - ½ Moly steels, while XTREME B3 deposits weld chemistry needed for 2 ¼ Chrome - 1 Moly steels. Designed to meet DNV Y69MS (H5) for welding on offshore jackup rigs, XTREME 120 wires produce welds in 120-130 ksi tensile strength range, yield strengths over 105 ksi, and Charpy impact properties of 51 lb-ft at -76°F.

Arcos Industries, LLC
Mount Carmel, PA 17851
Nov 11, 2009 Bare wire and covered stainless steel electrodes, Arcos 309/309L are available in dia from 0.035 - 3/16 in. Covered electrodes are offered in 3 different coatings, -15, -16, and -17 and in standard dia from 3/32 - 3/16 in., as well as non-standard dia up to 0.250 in. Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) units can be used for welding Type 304 and similar base metals. They are suited for general fabrication, automotive exhaust systems, and nuclear power facilities.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Nov 09, 2009 Endurance E70C-6M-H4 was developed to produce single, consistent wire surface that results in continuous, uninterrupted feeding and consistent arc starts even under difficult of conditions. Beads are smooth and well washed with even edges and minimal silicon islands. Electrode is available in 0.035, 0.045, 0.052, 1/16, 5/64, 3/32 and 1/8 in. dia. and can be used for heavy sheet metal fabrication, automotive applications, structural work, pipe welding, and water heater welding.

AMOT Controls Corp.
Houston, TX 77064
Nov 04, 2009 Suited for underground mining or similar applications calling for Group 1 certification, Chalwyn SVX electronically operated air intake shutdown valve has non-sparking zinc alloy body and solenoid cover. Failsafe valve helps to prevent potential explosions from diesel engine ignition wherever there is combustible gas, vapor, or dust hazard. Designed for air intake diameters from 1½-8 in., butterfly valve can be flange or hose mounted.

Weldcraft
Appleton, WI 54911
Oct 14, 2009 Designed for maneuverability, Crafter Series(TM) CS125A and CS200A models carry respective welding capacity ratings of 130 Adc/100 Aac and 200 Adc/150 Aac at 60% percent duty cycle. Torch body weight helps minimize welding operator fatigue, while D-Handle(TM) design lets operator orient torch by feel and improves overall torch control. Also, air-cooling capacity eliminates need for water-cooled systems and provides portability for field applications.

Arcos Industries, LLC
Mount Carmel, PA 17851
Oct 14, 2009 Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as headers and main steam piping. It is available in diameters from 3/32 to 3/16 in.

Farr Air Pollution Control
Jonesboro, AR 72401
Oct 12, 2009 Zephyr® III features metal filter that functions as spark trap, main filter for fine particle removal, and carbon filter for odors and gases. Either Gold Cone® HemiPleat® standard- or high-efficiency or DuraPleat® washable filters can be used. System includes manually activated Venturi-assisted pulse cleaning system and quick-clamp for simplified cartridge sealing and removal. Operated via 110 v/1 ph 60 Hz power cord, it offers airflow capacity of 700 cfm at capture hood.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Oct 08, 2009 Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode suits applications in wide range of temperatures as well as chloride contaminated environments.

Secoa Technology
Dalton, GA 30721
Oct 05, 2009 Secoa technology processes untreated welding nozzles supplied by customers and transforms them into PerfectArcs(TM) nozzles with extended life design to minimize nozzle cleaning time for any manual or robotic MIG welding process. Self-cleaning PerfectArcs(TM) nozzles eliminate need for labor-intensive spatter release sprays and dips. Products shed spatter, permitting shielding gas to flow properly and ensuring proper, clean welds.

Hobart Brothers Co.
Troy, OH 45373-2900
Sep 17, 2009 Matrix(TM) wire is designed to optimize performance in high-volume robotic welding applications, especially those used in heavy equipment manufacturing. Arc starting and wire feedability characteristics result from proprietary technology that has also been shown to extend life of robotic gun liners and eliminate buildup at drive rolls. Wire creates consistent weld bead shape, offers crack resistance, and minimizes silicon island formation.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Sep 14, 2009 Available in 0.035, 0.045, 0.052 and 1/16 in. dia., low slag, low alloy, metal cored electrode, Select 80C-Ni1LS facilitates painting after welding. It is designed for welding of fine grained or low alloy steels requiring moderate tensile strength and good subzero CVN toughness, such as ASTM A203, Gr E, A302, A575 and A633. These steels are utilized in fabrication of earthmoving machinery and buckets, offshore equipment, and mining machinery.

Sensor Developments, Inc.
Orion, MI 48359
Sep 11, 2009 Storing all information in Tablet PC or laptop for each recording, Bluetooth-enabled weld probe lets technicians follow schedule of maintenance for each welder via GUI. Sensor links up with PC upon power-up, and each clamping force measurement is stored automatically, along with date, time, and designation of welder. Upon completion of each measurement, technician is directed to next welder on list. When audit rounds are complete, technician may print/save audit data for QC.

Arcos Industries, LLC
Mount Carmel, PA 17851
Sep 09, 2009 Built with lower carbon contents to reduce intergranular carbide precipitation, Arcos 308/308L bare wire and covered stainless steel electrodes are designed for welding food, brewery, and pharmaceutical equipment in nuclear facilities and general structural applications. Bare wire (ER308/308L) and covered (E308/308L) electrodes are used for welding similar materials including AISI grades 301, 302, 304, 305, and are available in diameters from .035-3/16 and 3/32-3/16 in., respectively.

Huntingdon Fusion Techniques-USA Inc.
Melbourne, FL 32936-1175
Aug 20, 2009 Argweld® Weld Purge Monitor, MKV version, provides welders and QC personnel with information about Oxygen content in vicinity of weld joints. This allows optimization of welding conditions while minimizing rejects as well as gas and time consumption. Each monitor comes with stainless steel sampling probe, 2 m length of rubber hose, vacuum sampling hand pump, and carrying strap. It can be used to continuously monitor oxygen level and check purge gas quality at frequent intervals.

Vent-A-Fume, A Div. of Vent-A-Kiln Corp.
Buffalo, NY 14207
Aug 11, 2009 Place-A-Vent Model PFE can remove/ventilate fumes produced by welding, brazing, soldering, laser cutting, and plasma cutting. Product comes in ½ hp model, PFE-350 and 1 hp version, PFE-750. Model PFE-350 has standard 4 x 8 in. hood and inlet/outlet dia of 4 in., while PFE-750 has standard 8 x 8 in. hood and inlet/outlet dia of 6 in. Features included are high pressure fan unit fabricated with 14 Ga steel housing, self-cleaning radial wheel, 25 ft of discharge hose, and 10 ft of intake hose.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 10, 2009 Designed for continuous operation, Mobiflex® 100-NF is suited for construction or shop welding applications where removing welding fume from source is needed without filtration. Portable, low-vacuum system can adapt to various work locations and welding applications, including stick, TIG, MIG, and flux-cored. Components include 16 ft house/hood set and 16 ft exhaust hose set, which can also be used to extend hose/hood set to full length of 32 ft.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 10, 2009 With low fume generation rates, UltraCore® 70C Gas Shielded Flux-Cored Wire optimizes cleanliness and visibility while welding. Diffusible hydrogen levels are controlled at H8 AWS classification to provide resistance to hydrogen induced cracking. Optimized bead stacking and slag removal minimize clean-up time for multi-pass welding. Wire meets requirements of structural fabrication, heavy equipment, and ship building industries.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 10, 2009 Designed to meet requirements of heavy equipment, structural fabrication, and mining industries, gas-shielded UltraCore® 75C provides optimized stackability for welding thick steel sections. Basic slag system offers resistance to hydrogen induced cracking in many applications, including difficult-to-weld materials and restrained joints. Charpy V-notch test results are capable of exceeding AWS E70T-5C-JH4 impact requirements of 20 lbf-ft at -40°F.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Aug 06, 2009 Designed specifically for welding applications, FILTAIR MWX-D features 875 cfm airflow at hood and captures up to 95% of small welding fume particulates. MERV 15 rating means filter is 90% effective at filtering 0.3-1 micron sized particles found in welding fume. Extraction arm, available in 7, 10, and 12 ft lengths, is supported externally, so air flows through unobstructed. Additional features include filter pressure gauge and metal base with large rear wheels for mobility.