New Power Supplies Products

Step Down IC Converter offers max output current of 1.4 A.

Model MD5011T contains control IC and main switch MOSFET on single chip SOP-8 package. Offering 90% efficiency, unit features input range of 4.5-14 V and output voltage of 0.8-12 V. It includes remote on/off, overcurrent protection, and built-in thermal protection. Converter is recommended for designers who have employed regulators but find thermal issues to be problematic and have insufficient...

Point-of-Load Converters offer efficiencies to 94%.

Suited for distributed power architecture applications, VPOL series dc-dc converters are available in 5, 15, and 16 A versions. Non-isolated, UL certified products operate within -40 to 85Ã-

Synchronous DC/DC Controller corrects output voltage errors.

Operating from 4-30 V input supplies, 2-phase, step-down Model LTC3709 eliminates voltage errors introduced by PCB traces and high load currents. Integrated differential amplifier measures output voltage directly at load and compensates for voltage drop error. Suited for driving N-channel MOSFETs, controller delivers up to 40 A to loads as low as 0.6 V. It can operate from 2-90% duty cycle at 200...

DC/DC Converter suits power over Ethernet applications.

Developed to comply with IEEE 802.3af standard 2,250 Vdc isolation, Powerstax H201 series operates on fixed frequency with adjustable output voltage. Open frame module has input voltage range of 35-75 V, provides regulated 52.5 V output, and produces up to 200 W power in half-brick package size. Efficiency is rated up to 92.5% at full load. With operating temperature range of -40 to +85Ã-ºC,...

The Future of Electric Motors in the Automobile Industry

This eBook discusses the future of electric parts in the automobile industry and some of the challenges associated with them, while offering expert solutions.

Switching Power Supplies feature active PFC.

Housed in open PCB, 1U compliant package, Series REL150 provides output power of 150 W and accepts universal input from 85-264 Vac with active PFC to 0.95. Twenty-two models provide single, dual, triple, and quad outputs from 2.5-48 Vdc. All feature soft-start circuitry, integral EMI filtering, power-good LED, and output adjustment potentiometer. Operating over temperature range of -10 to +50Ã-

Rack Mount Power Supplies optimize installation space.

Rack Mount Power Supply Series includes 24 models, twelve 24/28 Vac units and twelve 6-15 Vdc units, available in 8, 16, and 32 fused or PTC-protected output configurations. Most models include surge suppression, filtered and electronically regulated outputs, individual power LED indicators, removable terminal blocks with locking screw flange, power switch with built-in circuit breaker, and...

Power Supplies target outdoor CCTV applications.

Four-output CCTV Power Supplies feature 3 PTC-protected, power-limited outputs for video cameras and 1 fuse-protected output for PTZ, heaters, and other video accessories. Model WPTV244300UL provides field-switchable 24 Vac at 12.5 A or 28 Vac at 6.25 A, while Model WPTV244175UL provides field-switchable 24 Vac at 7 A or 28 Vac at 6.25 A. Both are UL Listed and accept 115 Vac 50/60 Hz. They...

MicroPower Inverter has integrated Schottky diode.

Available in 6-lead SOT-23 package, LT3483 utilizes current-limited, fixed off-time architecture and features BurstModeÃ-® operation for quiescent current of 40 Ã-µA. This 40 V, 200 mA inverting dc/dc converter has 2.5-16 V input voltage range and generates regulated negative outputs to -38 V. With footprint of less than 40 mmÃ-², product features integrated feedback resistor output...

Step-Up DC/DC Converter comes in SOT-23 package.

With profile height of 1 mm, LTC3426 employs antiringing circuitry, internal soft-start, and internal 2 A MOSFET switch. Its 1.6-4.2V input voltage range enables product to operate from dual cell Alkaline/NiMH/NiCd to single cell Li-Ion batteries, delivering outputs up to 5.5 V with efficiencies over 90%. It has constant 1.2 MHz switching frequency, and 100 milliohm switch generates up to 800 mA...

DC Power Supply generates up to 1.2 kW, without noise.

With output of 0-40 Vdc, 0-30 A, Model VSP4030 comes in 19 in. rack-mounted chassis measuring 1U high. Output voltage control is provided via manual tuning, remote control from RS-232 interface, and analog remote sensing. Soft switching technique ensures that switching action occurs when voltage across switching device is at minimum, eliminating sharp voltage transients. Up to 9 power supplies...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.