Welding Guns

Welding Equipment & Supplies, Robotics

Welding Gun features Low Stress Robotic Unicable technology.

July 2, 2008

Designed for thru-arm robotic welding systems, TOUGH GUN(TM) ThruArm(TM) Series robotic guns with LSR Unicables is available as complete package for both clutch and solid-mount robotic systems. At 100% duty cycle, they provide 500 A air-cooled capacity with CO2 and 350 A with mixed gases, based on NEMA standards. LSR Unicables include rotating power connection to relieve stress caused by routine torsion and protective conduit to shield cable components from harsh welding environments. Read More

Welding Equipment & Supplies, Machinery & Machining Tools

Multipurpose Welder is designed for use with flux cored wire.

June 3, 2008

Suited for MIG, DC TIG, and stick electrode welding, MultiMaster® 300X is optimized for use with Dual Shield X series wire. It utilizes Super Switch(TM) technology with high-speed solid-state power control and includes output preset control with 2 digital meters that allows setup from Dual Shield X series quick setup card. DC welding output is from 15-300 A at 40% duty cycle. System includes .045 and .052 in. dia wires and 400 A, 15 ft gun setup for same diameters. Read More

Welding Equipment & Supplies

MIG Guns feature Tweco style and all replacement parts.

May 29, 2008

Available from 200-500 A, Tweco® Style Spray Master® guns include all replacement parts from front end to rear end. These parts include power pins for Tweco®, Miller®, and Lincoln®. Each gun offers front end handle as well as Lightning® rear end assembly, spring guard, and handles. Other consumables include nozzles, contact tips, diffusers, and conductor tubes. Read More

Welding Equipment & Supplies

MIG Guns come with all necessary replacement parts.

May 29, 2008

Available from 180-450 A, Tweco® Style Spitfire® guns include all replacement parts from front end to rear end. These parts include power pins for Tweco®, Miller®, and Lincoln®. Additionally, guns offer front end handle with hanger hook as well as Lightning® rear end assembly, spring guard, and handle. Other consumables include nozzles, contact tips, diffusers, and conductor tubes. Read More

Welding Equipment & Supplies

Welding Gun supports Tweco 4 and Euro connections.

May 27, 2008

Rated to 350 A at 60% duty cycle, Dura-Flux self-shielded welding gun accepts flux-cored wire up to 3/32-in. and can be configured with direct plugs for wire feeders outfitted with Tweco 4 and Euro gun connections. Unit includes non-metallic trigger that minimizes heat absorption during welding, trigger guard for maneuverability in confined areas, and sealed microswitch that keeps out dust, dirt, and other contaminants. Read More

Welding Equipment & Supplies

Push-Pull MIG Gun optimizes aluminum welding.

September 6, 2007

Rated for welding at 300 A/100% duty cycle, Model XR-Aluma-Pro(TM) gooseneck-style air-cooled MIG gun optimizes feeding performance for 4000 and 5000 series aluminum through 2-position tension control, while water-cooled unit is rated for welding at 400 A/100% duty cycle. Both feature 3¾ turn potentiometer for wire feed speed (WFS) control that can be adjusted while wearing welding gloves, self-seating head tube that allows access to tight spots, and replaceable feed cable liner. Read More

Welding Equipment & Supplies

Flux-Cored Gun is rated to 350 A at 100% duty cycle,

August 24, 2007

Accepting flux-cored wire up to 3/32 in., self-shielded Dura-Flux(TM) Gun features non-metallic trigger that absorbs less heat than metal triggers. Trigger also has sealed microswitch, which keeps out dust and dirt. Gun is equipped with heavy-duty monocoil power cable, Centerfire(TM) contact tips, and interchangeable power pins and trigger leads for compatibility with both Miller and Lincoln products. Power pin liners are changed without tools to facilitate maintenance. Read More

Welding Equipment & Supplies

Welding Guns feature insulated gooseneck design.

February 23, 2006

Magnum® semiautomatic welding guns are configured for use with .035-.045 in. or .052 to 1/16 in. MIG or Outershield® gas-shielded flux-cored operations. Rated at 400 A at 40% duty cycle with CO2 shielding gas, guns are pre-assembled with contact tips, gas diffusers, insulated gas nozzles, and cable liners. Other features include handle grip with non-slip grooves and 15 ft gun cable with abrasion-resistant outer jacket and wound steel liner. Read More

Welding Equipment & Supplies

Robotic MIG Gun suits harsh environments.

January 26, 2004

Lightning Robotic MIG Gun (LRMIG) employs quick-change taper lock seating gooseneck that allows neck to be removed and installed quickly. Timed for repeatability, gun is compatible with Tregaskiss® and can be modified to fit various front and rear configurations. Read More

Welding Equipment & Supplies

Welding System has 30-250 A output range.

November 25, 2003

Suited for sheet metal fabrication, Power MIG(TM) 215 features 215 A @ 30% duty cycle and industrial drive system with tachometer regulated drive. Diamond Core(TM) Technology creates arc that delivers smooth starts and low spatter, while separate drive gear reduces pressure on drive motor shaft. Features include brass-to-brass connection from gun to wire drive system, 7 voltage tap ranges, 115 Vac auxiliary power receptacle, and 15 ft, 250 A rated gun. Read More

Welding Equipment & Supplies

MIG Welding Gun is rated at 250 amps.

April 9, 2003

FABGUN(TM) 250 air-cooled MIG gun uses standard consumables and comes with 12 ft leads. Ergonomic handle provides comfort and less operator fatigue. End users pick between yellow, blue, or red packaging to select gun with necessary connection for specific welding systems. FABGUN 250 is available with connections for Thermal Arc®, ESAB®, Miller®, Lincoln®, and many other welding systems. Read More

Welding Equipment & Supplies, Machinery & Machining Tools

Spool Gun suits aluminum welding applications.

February 24, 2003

Spoolmatic® 15A, with 15 ft cable assembly, offers nozzle assembly that balances gun evenly in operator's hand. Capable of wire feed speeds from 70-875 ipm, unit pushes wires with .023-1/16 in. dia and holds one 4 in. spool. Additional offerings include adjustable barrel assembly that allows operator to vary contact tip-to-nozzle position, built-in gas valve, and ability to adjust wire speed at gun handle. Read More

  • 1