Welding Equipment

Welding Equipment & Supplies

MIG Welding System generates 350 A at 100% duty cycle.

September 1, 2015

Offering optimized arc starts and arc stability, Continuum 350 features 2 welding processes. Versa-Pulse™ low-heat, low-spatter process delivers fast travel speeds for semi-automatic and automated welding on thin materials up to ¼ in. High-Deposition MIG process is intended for thicker materials and larger welds from 6–8 mm. Continuum 350 comes with Insight Core™ Internet-based welding information management system that monitors, collects, and transmits actionable data to Web-connected device. Read More

Welding Equipment & Supplies

AC/DC TIG/STICK Welding Systems offer full digital control.

August 20, 2015

Portable, inverter-based welding systems ET 220i (29.5 lb) and ET 301i (35.9 lb) offer full digital control of TIG and Stick welding arc. Both units automatically accept single- or 3-phase, 50 or 60 Hz, 208–230 Vac or 460 Vac primary power (±15%). When connected to single-phase power, units offer max TIG output range of 5–200 A. On 3-phase power, ET 220i provides top TIG output of 220 A and Stick output of 170 A; respective values for ET 301i are 300 A and 200 A. Read More

Machinery & Machining Tools, Material Handling & Storage, Welding Equipment & Supplies

Coil Unwinder/Straightener/Feeder handles high-strength materials.

August 13, 2015

SpaceMaster Series 4 combines unwinding, straightening, and feeding of coil stock into one piece of equipment that occupies 22 ft of floor space. While Feeder-Straightener features servo-actuated pilot release of upper straightener rolls, systems also feature tension-maintaining powered pull-off rolls. Products handle materials – CRS, HRS, AHSS, stainless, and aluminum – from .020–.40-in. thick and 12–72 in. wide and 10,000–60,000 lb coil weights. Press feeding speeds range from 70–80 spm. Read More

Material Handling & Storage, Welding Equipment & Supplies

Benchtop Welding Wire Feeder has heavy-duty design.

August 11, 2015

Featuring separate digital displays for voltage, wire feed speed, and amperage, Warrior® Feed 404 HD pays out .030–3/32 in. wire at speeds from 50–800 ipm. Drive roll design, combining 2 lower gear-driven rollers with 2 upper idler/smooth pressure rollers, minimizes scrubbing of wire, and debris generation. Along with Short Circuit Termination (SCT) technology, features include gas purge, wire inch, trigger lock, burnback, slow run-in speed, and ability to preset wire feed speed/voltage. Read More

Welding Equipment & Supplies

Engine-Driven Welder/Generator targets pipeline welding.

August 10, 2015

Equipped with 22 hp Kubota® water-cooled Tier 4 Final diesel engine, Cross Country™ 300 supports DC stick, wire, and TIG processes. Unit produces 300 A DC/32 V at 100% duty cycle and range of 40–300 A. In addition, system provides 11,000 W of 3-phase continuous and 10,000 W of single-phase continuous AC generated power. Intended for pipeline welders, Cross Country 300 utilizes cellulosic or low hydrogen stick electrodes and is optimized for root, fill, and cap passes. Read More

Welding Equipment & Supplies

Orbital Welding Power Supply increases operational efficacy.

July 28, 2015

With lack of openings on top surface preventing small items from falling into printer/CPU section, M217 WDR incorporates 12.0 in. Hi-Res color touchscreen, 2 USB ports, and thermal printer. Connections are positioned to facilitate spacing for weld heads and accessories, and component layout facilitates service. Capable of 5–150 A of welding power and auto-switching between line voltages of 110 and 220 V, 100% duty cycle rated supply employs DC voltage supplies with MTBF of 100,000 hr. Read More

Welding Equipment & Supplies

CC/CV Power Source provides up to 400 A at 60% duty cycle.

July 7, 2015

Designed to accept 3-phase primary power from 220–460 V ±10%, 50/60 Hz, Warrior™ 400i MV has total output range of 5–400 A for welding .030–5/64 in. cored wire and solid wires. SCT Technology provides automatic burn-back function that, after every stop, leaves wire-end in perfect shape ready for next start. For Stick welding, operators can choose from 3 different modes that optimize arc characteristics. Multi-process welder has low-end control to provide stable TIG arc down to 5 A. Read More

Welding Equipment & Supplies

Engine-Driven Welder suits pipeline, general construction use.

June 30, 2015

Built to withstand jobsite conditions, SAE-300® MP Pure DC Generator Welder employs 24.7 hp, water-cooled, turbo-charged engine and produces 300 A DC/32 V at 60% duty cycle and 250 A DC/30 V at 100% duty cycle. Unit also provides 3,000 W of AC generator power and dual continuous current control. All-copper windings and flat DC output ensure smooth, stable arc. Other features include Temperature Stabilization™, CV output contactor, OCV Boost function, block heater, and 16 gal fuel tank. Read More

Welding Equipment & Supplies

Ultrasonic Welder features all-electric servo technology.

June 2, 2015

Featuring self-contained design with iQ Series Generator/Power Supply housed within press, iQ Series Integrated Servo Driven Ultrasonic Welder addresses need for out-of-box, plug-and-play welder. All-electric servo technology eliminates variability associated with pneumatic press components, optimizing repeatability and accuracy. For optimal bond strength, Melt-Match® technology precisely controls collapse speed profile during weld and precisely matches collapse speed during melt phase. Read More

Electrical Equipment & Systems, Material Handling & Storage, Welding Equipment & Supplies

Cable Feeding Systems are designed for efficiency, usability.

April 29, 2015

While respectively able to handle up to 330 lb reels with max diameter of 24 in. and up to 880 lb reels with max diameter of 36 in., PreFeeder 3300 and 4300 are based on simplified design that facilitates use, helps increase production rates, and promotes processing efficiency. All axes are electrically driven for facilitated reel handling and accelerated changeovers, and shaftless design aids reel loading/unloading. Read More

Welding Equipment & Supplies

Portable MIG Welder features multi-process capabilities.

April 16, 2015

In addition to letting users choose between shielding gas or gasless (flux-cored) wires, 13 kg Weldmatic 200i offers flexibility via MIG (200 A), stick (170 A), and TIG welding capabilities. Single-phase unit, also offering 200 A of Lift-Arc capability, has industrial-grade components, including tradesman quality gun and cable with euro connector. Control panel aids selection of gas and wire type, while built-in VRD and 240 V power source with thermal protection device promote safety. Read More

Controls & Controllers, Welding Equipment & Supplies

Laser Welding Systems feature consistent endpoint control.

March 27, 2015

Used to control operation of LASERDYNE 795 and LASERDYNE 430BD multi-axis laser systems, LASERDYNE S94P includes SmartRamp™ feature which provides consistent endpoint control during laser welding. SmartRamp controls laser parameters in conjunction with motion of beam, producing uniform weld penetration along entire length of weld while eliminating visible endpoints, potential stress-risers, and leak points. Read More

Welding Equipment & Supplies

MIG Welding System simplifies aluminum auto body repairs.

March 24, 2015

Supplied with all equipment needed to make repairs on aluminum auto body panels and beds, Millermatic® 350P addresses challenges posed by welding thin gauge aluminum. Turnkey system provides 300 A output at 60% duty cycle, with low-end Pulse MIG programs dedicated for aluminum welding, and 75 ipm low-end wire feed speed capabilities that lessen heat input to reduce burn-through and warping. Product can also be used to pulse weld with silicon bronze, steel, and stainless steel wires. Read More

Welding Equipment & Supplies

TIG Welding Power Source meets professional fabrication demands.

March 13, 2015

Rated 330 A at 40% duty cycle and 300 A at 60% duty cycle, AC/DC inverter-based Aspect™ 375 provides TIG output range of 2–375 A; single-phase range is de-rated to 2 to 250 amps. Constant-current stick and TIG machine, delivering arc stability at all amperage levels, employs AC Auto-Balance® technology as well as Intellistart™ technology to optimize performance on diverse materials and thicknesses. Features also include 4 AC Wave Shape controls, TIG Pulser, and automatic and manual overrides. Read More

Welding Equipment & Supplies

Vibration Welders feature digital frequency drive.

February 27, 2015

Based on solid welded tubular steel frame that eliminates machine failure due to vibration, VW5000 Series has 4 supported rails and 8 bearings. Units come with 15 in. color touchscreen computer with solid state drive. Intuitive user interface software provides real-time graphing of amplitude, pressure, and collapse distance for process evaluation and troubleshooting. Both data and tooling program storage have large memory and ability to download data on external devices via USB port or Ethernet. Read More

Material Handling & Storage, Welding Equipment & Supplies

Cable Feeding System improves production line flexibility.

February 27, 2015

PreFeeder 4650 offers feeding system for cable processing lines with reels weighing up to 1,320 lb. For facilitated reel handling and accelerated changeovers, all axes are motorized and controlled with usability-optimized, handheld controller. Reel clamping and lifting concept eliminates use of heavy reel shafts and clamps. While one version can feed up to 0.71 in. dia, flexible cables, another version that can feed up to 1.38 in. dia, less flexible cables. Read More

Welding Equipment & Supplies

Training System advances students' welding skills.

February 17, 2015

Featuring advanced motion-tracking technology, LiveArc™ System provides students with immediate feedback. Reality-based training system is also available with welding positioning arm for training in out-of-position applications. Using this option, instructors can expand assignments beyond flat/horizontal welding parameters, empowering students to master more advanced welding skills, first in simulation mode and then with live arc. In addition, LEDs on SmartGun optimize sensing ability. Read More

Welding Equipment & Supplies

Heavy Duty Welder delivers 520 A with Tier 4 Final engine.

February 2, 2015

Driven by Deutz® 34.8 hp D2.9L4 engine, Vantage 520 SD produces 520 A/30 V at 60% duty cycle and 450 A/32 V at 100% duty cycle. Unit can also deliver 11,000 W single-phase or 17,000 W 3-phase, 120/240 Vac generator power. ArcLink® enables digital communication with wire feeders, while pulsing capabilities provide arc control for out-of-position work. Suitable for extreme environments, Vantage 520 SD handles stick, TIG, MIG, pipe, and flux-cored wire welding as well as arc gouging. Read More

Welding Equipment & Supplies, Machinery & Machining Tools

Component Feeding System handles small and SMT parts.

January 27, 2015

With 134 x 152 mm footprint that maximizes lane capacity, StripFeeder System Mini loads short (2–4 in.) strips of tape-and-reel components onto compact modules for prototyping and high-mix, low-volume applications. Removable rails can be mounted to accommodate array of tape sizes in same feeder, and design holds components securely in machined tracks to prevent parts from being miss-picked, flipped in pocket, or lost. Rails can be removed to accommodate components up to 120 mm tape width. Read More

Welding Equipment & Supplies

Welding Systems provide remote control of power source.

January 16, 2015

By letting welding operators set voltage at weld joint without control cables, XMT® ArcReach™ systems reduce downtime and exposure to safety hazards. Models XMT 350 VS ArcReach (3- or 1-phase power) and XMT 450 VS ArcReach (for 3-phase power) are compatible with Miller SuitCase® X-TREME™ 12 VS or 8 VS ArcReach feeders and provide multiprocess welding capabilities. Operator can precisely set arc voltage at feeder and monitor actual arc voltage and current delivered to weld via digital meters. Read More