Crafford-LaserStar Technologies
Riverside, RI 02915
Mar 24, 2008 Offering alternative to microscope GTA welding, 7700 Series Welding System can lay beads as small as .0025 in. making it suited for plastic injection mold, tool, and die maintenance and repair. System can repair slots, pockets, radius contours, and angles as well as polished, engraved, and textured surfaces. It also repairs thin walls with little or no warping. Suited for tool steel, aluminum, copper, titanium, and powdered metals, welder minimizes handwork required before polishing.

Weldcraft
Appleton, WI 54911
Mar 19, 2008 Rated at 150 A dc and 125 A ac, both at 60% duty cycle, air-cooled Legacy(TM) LS17 includes soft-grip handle and interchangeable fingertip switch that provides remote amperage control. Knuckle joint at base of handle facilitates control and movement, while minimizing stress on power cables and backend of torch body. Torch is available with 12 ½ or 25 ft single-piece rubber cable assembly, each of which comes standard with protective sheath.

Thermostatic Industries, Inc.
Huntington Park, CA 90255
Mar 19, 2008 Bulldog Red(TM) welding blanket and welding curtain damage control cloth has weldshed coating that stops hazardous fluids from being absorbed into cloth when toxic or flammable fluids are present. Abrasion- and spark-resistant cloth has service temperature of up to 1,000°F, does not conduct electricity, and is resistant to chemicals and weld spatter. It is OSHA-compliant and is available in 38 or 60 in. rolls at 50 yd in length.

Orbitform
Jackson, MI 49204
Mar 18, 2008 Weld Tip System (WTS) for robotic spot welding inspects spot welding electrodes and ensures that face diameters and general appearance meet acceptance criteria. It incorporates CURE® technology (Concurrent Universal Recognition Engine) memory processing architecture and is suited for all welding cells.

Schleuniger, Inc.
Manchester, NH 03103
Mar 18, 2008 Designed for use with automatic Cut Strip Terminate machines, PreFeeder 60 features controlled roller drive that feeds wire into accumulator to reduce tension before it is pulled by feeding mechanism. Wire line height can be adjusted, and wire end detection sensor is optionally available. PreFeeder 60 helps maximize productivity of processing machine, especially when it comes to wire packaging that might be problematic such as wire barrels, loose wires, and cardboard boxes.

Image Industries, Inc.
Huntley, IL 60142
Mar 17, 2008 Offering full range of weld stud fasteners and equipment including arc weld studs, capacitive discharge weld studs, and cable management studs, POWERfast(TM) System withstands harsh environments and is suited for isolation bushings, grounding lugs, and other access panel applications. System also includes hinge pins, security bolts, door rods, and paint stripping nuts.

Rofin-Baasel Inc.
Boxborough, MA 01719
Mar 14, 2008 Incorporating 4 high-precision positioning axes and CNC programming, StarWeld Integral enables users to select as much automation as they desire. Working chamber provides space for objects with edge length up to 500 mm, while motorized X, Y, and Z axes move work pieces with max weight up to 500 kg, allowing rapid and accurate positioning of parts. StarWeld Integral can be used as manual welding laser, joystick-controlled deposit welding laser, and as CNC laser welding system.

Bernard Welding Equipment
Beecher, IL 60401
Mar 13, 2008 Designed for heavy equipment manufacturing operations, Heavy-Duty Centerfire(TM) Nozzles feature removable nozzle cone, built-in spatter guard, and heat-resistant insulating material that withstands degradation at 400-600 A. For companies that use same power source for MIG and self-shielded welding, Gasless Centerfire parts allow operators to convert Q-Gun from one process to another. Both nozzles and gasless parts operate with standard Centerfire contact tips and diffusers.

Kamweld Technologies, Inc.
Norwood, MA 02062
Mar 13, 2008 Including 4 models, FW-5 Series of Fusion Welders have temperature range of ambient to 950°F, are constructed in SS, and measure 11.5 in. Model FW-5A has digital temperature controller, while FW-5B features manual air temperature controller, and both are equipped with air regulators that prevent heater element burnout. Including internal air compressors, Models FW-5C and FW-5D include separate power/heat switches to prevent welders from heating up without air compressors running.

ERICO, Inc.
Solon, OH 44139-2631
Mar 12, 2008 CADWELD® PLUS MULTI combinines mold block and a range of gaskets (batting) into complete welding system. It features compact compression structure to enable alignment of conductors and self-sealing design that prevents weld metal leakage. With one universal mold, user can make over 30 separate connection types, and each weld is complete in about one minute. Permanent molecular bonds that are created with system do not loosen or corrode.

Crafford-LaserStar Technologies
Riverside, RI 02915
Mar 11, 2008 Suited for metal joining and repair applications, iWeld laser system features 40 J/5.0 kW/15 Hz, and has footprint of 19 x 24.5 in. Side entry panels provide access for field maintenance tasks. Applications include medical device component assembly, complex electronic components, high-precision industrial assemblies, and pressure-sensitive hermetic seals in automotive, aerospace, aviation, computer, prototyping laboratories, and medical instrument and consumer product industries.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Mar 10, 2008 Developed for welding of carbon and certain low alloy steels, Select EM12KS and Select EH12KS feature cored wire design that delivers high deposition rates, and can be utilized with neutral or active fluxes. They have high manganese and silicon content, facilitate bead penetration control, and reduce burn-through on root passes or poorly fit up joints. Applications include welding of structural carbon steels such as A36, A285, A515, and A516.

Arcos Industries, LLC
Mount Carmel, PA 17851
Mar 05, 2008 Designed to meet demanding radiographic requirements, Arcos 8N12H (ENiCrFe-3) covered electrode offers high temperature strength and oxidation resistance. High carbon wire welds similar composition base metals to themselves and to carbon steel, and can be used for surfacing carbon steels. It is suited for welding in desalination plants, petrochemical facilities, and power generation plants, as well as in temperature critical conditions such as furnace equipment and pipe work.

Weldcraft
Appleton, WI 54911
Feb 29, 2008 Facilitating ordering while minimizing inventory, 4 torch packages are designed for air-cooled applications from 150-200 A, and 2 torch packages include 250 or 350 A torch for water-cooled applications. Additionally, packages provide 25 ft power cable and cable cover (water cooled packages), power cable adapter, and 15 ft ground cable. Gas hoses and water hoses are also provided, as required, while Smith Equipment flow meter regulator and welding accessory kit are standard.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Feb 15, 2008 Featuring bus communication interface to control lift arc start and end, TAWERS-Aluminum MIG can detect when current is flowing and retracts to take pressure off wire, resulting in reliable arc ignition. It uses 3 motor system to ensure accurate wire feed, and features syncro-weaving function and servo feeder for real-time parameter adjustment from thick to thin materials. Product can also use high voltage touch sensing through aluminum oxide, which prevents wire bending.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Feb 07, 2008 SelectWear 63 open arc wire yields deposit of primary chromium carbides and secondary columbium carbides in martensitic matrix. Its weld deposit delivers abrasion resistance with moderate impact and will stress relief crack check. Solution maintains hardness from 60-63 HRC and wear resistance into 1,200 to 1,400°F range. Also available, SelectWear 65 will stress relief crack check and offers hardness from 61-65 HRC as well as wear resistance up through 1,400 to 1,500°F.

Spika Welding & Mfg., Inc.
Moccasin, MT 59462
Jan 31, 2008 Gas Guardian Safety Welding Cart is available with industrial quality cutting/welding kit, regulators, hose and self-recoiling hose reel, and high-pressure supply lines that attach to customer-supplied cylinders. It is designed to prevent accidents involving oxy-acetylene gas welding and cutting processes. Finish is powder-coated safety yellow and unit ships completely assembled.

Premium Quality Welding Products
Fall River, MA 02721
Jan 24, 2008 Striker Sleeve provides a way to consolidate and locate tools necessary to ignite torch and maintain torch tip, and offers protection for workers. Striker Sleeve blocks open frame of spark lighters reducing chance of it getting hung up and eliminating one more fall hazard. Able to fit on either single or triple flint spark lighters, it can be configured for welders, plumbers, and all trades utilizing spark lighters.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jan 18, 2008 With MVP(TM) Plugs, Maxstar® 150 can connect to 115 and 230 V receptacles. Unit is available in Stick, Stick/TIG with Lift-Arc start, and Stick/TIG high frequency with Lift-Arc start models. Stick/TIG models include 6-pin receptacle for use with foot pedal or remote control switch. Supplied in polypropylene X-Case(TM) for protection against damage during storage or transport, Maxstar® 150 has DC Stick/TIG output of 150 A at 30% duty cycle using 230 Vac power.

Hobart Brothers Co.
Troy, OH 45373-2900
Jan 17, 2008 Measuring 35 in. tall with 23 in. dia, 900 lb X-Pak is made from 100% recyclable fiber and includes 23 in. chimeless cone. Wire offered with drum includes Tri-Mark® Metalloy® Vantage(TM) and Metalloy 76; Hobart® Fabcor® 86R; and Corex® Metal-Cor Maxim(TM) and Metal-Cor 6 in .045 and .052 in. dia. Optional overhead lifting device works on CAM action that stabilizes drum during transport and attaches to overhead hoist or fork on lift truck.