Welding Equipment & Supplies

Materials & Material Processing, Welding Equipment & Supplies

Flux Cored Electrode welds plates with surface contaminants.

Oct 13, 2014

Available in 3/32 in. dia, Select 70CRP is suited for welding automatic or semi-automatic fillet welds on ship panels, barges, or any structural plate that has been coated with rust-preventive primer or non-coated plate that has rusted. Formulation of this flux cored, carbon steel electrode enables welding on primer and rust with minimal porosity/blowholes. Additionally, wire delivers... Read More

Welding Equipment & Supplies

High-Speed, Servo-Driven Spin Welder joins small-diameter parts.

Oct 09, 2014

Capable of orienting part halves relative to each other with positioning accuracy of ±1.0°, HS-OSW runs up to 7,000 rpm and targets manufacturers of components with diameters down to 0.125 in. Dual-speed proportional valve allows pneumatic pressure control, enabling user to program individual settings for initial part approach speed, contact pressure, weld pressure, and cooling pressure in... Read More

Portable Tools, Welding Equipment & Supplies

Welding Hand Tools include chipping hammer, multifunction pliers.

Oct 03, 2014

Radius™ chipping hammer facilitates cleaning and removal of remove slag from any weld. While head includes flat and spiked sides, spiral handle recuses shock. Constructed from drop-forged steel, welding pliers is designed for 6 functions: nozzle and tip installation, wire cutting, nozzle cleaning, spatter removal, and slag hammer. Welper®, designed for use with MIG welding guns, offers 8... Read More

Robotics, Welding Equipment & Supplies

Compact Series Robots suit spot welding applications.

Oct 02, 2014

With respective payload capacities of 165 and 210 kg, MS165 and MS210 six-axis robots feature DX200 controller, high-speed spot and ARM (Advanced Robot Motion) control function, and 2,702 mm reach with ±0.2 mm repeatability. Gas spring and Sigma-5 motor technology reduce weight and profile. With respective payload capacities of 100 and 80 kg, MS100 and MS80W II robots can utilize... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Valcor Aerospace Capabilities & Products

Sep 26, 2014

As a custom fluid control device designer and manufacturer, Valcor Engineering Corporation (www.valcor.com) has produced valves, regulators, actuators and accumulators that have served the space market for decades. Valcor is a manufacturing company that works closely with our customers to create a custom engineered solution to their demanding fluid control... Read More

Material Handling & Storage, Welding Equipment & Supplies

Modular Clamp bends to hold parts at any angle.

Sep 24, 2014

Fully articulated and adjustable, Third Hand Modular Clamp holds parts at any position for hands-free access while user tack welds, cuts, grinds, sands, or paints. Two smooth ball joints allow user to rotate clamp arm 360° and bend arm to any position. Clamp position is securely locked and unlocked with turn of socket head cap screws. Measuring 1 ½ in wide, portable clamp has universal... Read More

Welding Equipment & Supplies

Sciaky, Inc. to Provide Turnkey Electron Beam Additive Manufacturing System to Lockheed Martin Space Systems

Sep 24, 2014

EBAM system will help Lockheed Martin reduce time and cost on the production of titanium propulsion tanks Chicago, Illinois – Sciaky, Inc., a subsidiary of Phillips Service Industries, Inc. (PSI) and provider of large-scale additive manufacturing solutions, announced today that it recently received a purchase order from Lockheed Martin Space Systems to provide a turnkey electron beam additive... Read More

Controls & Controllers, HVAC, Machinery & Machining Tools, Optics & Photonics, Welding Equipment & Supplies

Lincoln Electric on Display at IMTS with Solutions-Packed Booth

Sep 11, 2014

From Sept. 8 to 13, the company showcases solutions for welding, cutting and automation operations Cleveland – The Lincoln Electric Company will be in booth N-6520 at the International Manufacturing Technology Show (IMTS), Sept. 8 -13, at McCormick Place in Chicago to discuss the application of welding, cutting, automation and integration solutions in the production environment. Attendees of... Read More

Welding Equipment & Supplies

Shielded Electrode is suited for low-temperature stress relief.

Sep 09, 2014

Offered in .045, 052, and 1/16 in. dia, Select 70C-6 SR consists of E70C-6MJ-H4 gas-shielded, metal cored electrode with properties that promote weldability and minimal slag. This results in smooth arc transfer with maximized arc stability. Also, wire exhibits optimized mechanical properties at temperatures down to -60°F in both as-welded and stress relief condition. Suitable welding... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Valcor's V4700 Series Submerged Solenoid Valves

Aug 29, 2014

The series 4700–Submerged are direct-acting, solenoid shutoff valves capable of operating while submerged in aircraft grade fuels. Flow can be shut off in either direction. Series 4700-Submerged valves are similar to Valcor's series 4700 with a modification to the solenoid housing. A fluorosilicone "O" Ring is used to seal off the solenoid area allowing these valves to operate while being... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Valcor's 2-Way Direct Acting V70600 Solenoid Valve

Aug 28, 2014

Valcor has designed its Series V70600 valves with non-corrosive fluids and gases in mind and have a feature called an override control. They have a two-way shutoff and the override is manual. This control provides extra flexibility while operating it. Series V70600 are direct-acting solenoid shutoff valves available in Normally Closed and Normally Open configurations, both of which take two... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Valcor's High Flow, High Pressure V80000 Solenoid Valve

Aug 27, 2014

Valcor Series 80000 valves are designed for high flow, medium to high pressure systems. In their standard configuration, they are suitable for noncorrosive oil, fuel, water service and gases. In other configurations, with the incorporation of appropriate materials, they can also be adapted to corrosive service, and to high or low temperature applications. As with other Valcor solenoid valves, the... Read More

Robotics, Welding Equipment & Supplies

ABB Robotics to Introduce New Robots, Turnkey Manufacturing Cells and Enhanced Technology at IMTS 2014 in Chicago

Aug 26, 2014

Highlights include the new IRB 1200 robot family, the FlexMT machine tending cell, and part handling with the higher payload FlexPicker delta robot AUBURN HILLS, Mich.  –  ABB Robotics will feature over ten advanced technology demonstrations at the 2014 International Manufacturing Technology Show (IMTS), September 8-13 at McCormick Place in Chicago. The demos include new robots, turnkey... Read More

Welding Equipment & Supplies

Welders/Generators are driven by T4F-compliant diesel engines.

Aug 26, 2014

Able to handle Stick, TIG, MIG, and Flux-cored wire welding processes as well as Arc gouging, Vantage® 600 SD and Air Vantage 600 SD are driven by Tier 4 Final-compliant Deutz® turbo-charged, 64 hp, TD2.9L4 engine. Both welders incorporate pulsing capabilities, Waveform Control Technology®, and ArcLink® digital communication and produce 600 A/40 V at 60% duty cycle and 575 A/43 V at... Read More

Services, Welding Equipment & Supplies

250-Ton Friction Welder Announcement

Aug 25, 2014

American Friction Welding Inc. of Brookfield, Wisconsin announces the acquisition of a Thompson 250-ton Friction Welding Machine. This will be the largest direct-drive, rotary friction welding machine available for sub-contract work in North America. It will provide a new size range for fusing solid metal up to 7” diameter. Tube diameters can be accommodated up to 12”. Total part length can... Read More

Safety & Security Equipment, Welding Equipment & Supplies

Welker Ground Block Retracts Improve Weld Quality

Aug 21, 2014

The GB series ground block retracts offer a cost advantage over machined backups ground blocks for MIG and arc welding applications. Weld consistency is improved by producing a consistent ground even after significant electrode wear. The GB units are electrically insulated and feature lube-free design, double seals, and chrome-plated shafts. Optional copper adapter with a knurled or smooth swivel... Read More

Green & Clean, Machinery & Machining Tools, Welding Equipment & Supplies

What Makes Sonobond's Ultrasonic Welding System Outperform Competitors' Systems When Welding Tin-Coated and Oxidized Wires and Terminals

Aug 20, 2014

Lower Vibratory Amplitude and Higher Vibratory Force Provides Better Impedance Match for Successful Welding WEST CHESTER, Pennsylvania – Sonobond's ultrasonic technology provides the only ultrasonic system capable of welding the tin-coated wires and terminals essential to electrical applications for hightemperature, high-humidity and other environmentally challenging conditions. Tin-coated... Read More

Welding Equipment & Supplies

Sciaky, Inc. to Provide Turnkey Electron Beam Additive Manufacturing (EBAM) System to Major Aerospace Parts Maker

Aug 07, 2014

EBAM system will help manufacturer save significant time and cost on the production of large, high-value metal parts CHICAGO -- Sciaky, Inc., a subsidiary of Phillips Service Industries, Inc. (PSI) and provider of large-scale additive manufacturing solutions, announced today that it received a purchase order from a major aerospace parts maker to provide an electron beam additive manufacturing... Read More

Materials & Material Processing, Test & Measuring Instruments, Welding Equipment & Supplies

Sciaky, Inc. to Provide Turnkey Electron Beam Additive Manufacturing (EBAM) System to Major Aerospace Parts Maker

Aug 07, 2014

EBAM system will help manufacturer save significant time and cost on the production of large, high-value metal parts Chicago, Illinois — Sciaky, Inc.,a subsidiary of Phillips Service Industries, Inc. (PSI) and provider of large-scale additive manufacturing solutions, announced today that it received a purchase order from a major aerospace parts maker to provide an electron beam additive... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments, Welding Equipment & Supplies

Digital Analyzer measures and monitors oxygen during welding.

Aug 04, 2014

To provide oxidation-free welds, ORBmax measures and monitors oxygen particle counts in PPM range for high-purity welding applications in semiconductor, pharmaceutical, and aerospace industries. This instrument, equipped with maintenance-free optical sensor, shows oxygen PPM level on digital display screen that changes from red to green to let user know predetermined intensities have been... Read More