Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jan 21, 2013 Available in .045, .052, and 1/16 in. diameters, Metalshield® MC®-80Ni1 produces H4 diffusible hydrogen weld deposits in structural and heavy fabrication applications that require tensile strength of 550 MPa. Silicon island management minimizes slag and eases slag removal, while deoxidizing agents minimize weld clean up. In addition to low spatter and optimal arc stability, low-alloy wire features low temperature impact properties with Charpy V-Notch test results exceeding 35 ft-lbf at -60°F.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jan 14, 2013 Suitable for shipbuilding, offshore, construction, and pipe welding operations, Activ8™ is available in One-Pak® configuration that includes Magnum® PRO Curve™ 300 gun and 15 ft cable. Feeder is designed for 8 in. spools and is compatible with any DC CV and/or CC power source. Rated at 330 A at 60% duty cycle, Active8™ feeds self-shielded FCAW or FCAW-G and GMAW gas-shielded wires at 50–800 ipm. It handles GMAW wires from .023–.052 in. dia and FCAW wires from .035–5/64 in. dia.

MAXAL International, Inc    Traverse City, MI 49686
Dec 18, 2012 Registered by Aluminum Association and classified by AWS for wrought commercial applications, MAXAL 4943 offers corrosion resistance and low hot cracking sensitivity. Product does not depend upon dilution from base metal during welding to increase strength of weld deposit. Available in diameters ranging from .030–1/16 in., MAXAL 4943 MIG wire offers precisely controlled wire diameter, cast, and helix. TIG cut-lengths are available in 1/16, 3/32, 1/8, 5/32, and 3/16 in. dia.

Quantum Fuel Systems Technologies Inc    Irvine, CA 92614
Dec 14, 2012 Pre-assembled, quality tested, and fully validated natural gas storage modules and system assemblies leverage Q-Lite™ carbon-composite gaseous fuel storage technology and are designed for accelerated integration onto variety of vehicle platforms. Products foster intelligent lightweight systems that maximize on-board fuel storage and contribute to improved fuel economy, handling, and emissions. Advanced natural gas storage systems also lend to weight reduction and increased fuel storage.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Dec 12, 2012 Featuring modular construction, Gold Series® has reinforced door with double-thick hinges, and single flat inside panel to create smooth, air-tight gasketed seal. Fans are equipped with damper actuator handle that allows user to see from ground level whether damper is open or closed. Inside collector, gaskets have been moved to edges of pan so that no dust builds up on vertically mounted filters. Additional features include touchscreen controls, spark diverter inlet, and diaphragm silencer.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Dec 05, 2012 Designed for guns equipped with QUICK LOAD™ Liners, QUICK LOAD™ Liner AutoLength™ System minimizes wire-feeding problems and burnbacks, as well as premature contact tip failure and wear associated with misalignment between liner and contact tip. Spring-loaded module housed inside power pin applies constant pressure on liner, keeping it seated properly in retaining head or diffuser at all times. Allowing for up to 1 in. forgiveness, system accommodates liner movement during welding.

Westport Manufacturing Ltd    Vancouver, BC V5P5Z3
Dec 05, 2012 With universal system design that fosters OEM integration, Westport™ LNG Tank System provides on-board storage solution for vehicles using liquefied natural gas (LNG). Single-tank, 120 or 150 gal capacity single-tank systems can run for 350 or 450 miles, respectively, on cold (unsaturated) LNG fuel and are capable of carrying both cold and warm LNG. Driver display indicates LNG fuel levels as well as status and diagnostic information about tank and integrated pumps.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Dec 04, 2012 With Millermatic® 350P Aluminum, operator can tailor arc to weld by adjusting machine performance at point-of-use. True torque push-pull feed motor provides positive and accurate wire feeding, while electronic brake allows wire spool to free spool for drag-free wire delivery. Using Trigger Schedule Select, user can pre-program 2 weld settings and toggle quickly between them. Synergic welding capabilities match wire speed to arc voltage for optimal performance in MIG and Pulsed MIG processes.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Dec 03, 2012 Robotic Welding Education Cell 2.0, featuring collapsible 2,000 in.² max work surface area, has shielding gas bottle rack/storage, fume extraction system mounting, and welding robot. Mounted on wheels, lightweight unit fits through standard doorway and also has AutoDrive® 4R100 wire feeder, Magnum® PRO robotic welding torch and consumables, and SuperArc® L-56® GMAW welding wire. Unit includes production monitoring software and is designed to be training tool in classrooms and welding labs.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Nov 26, 2012 Supplied in portable package, VRTEX® Mobile delivers hands-on, entry-level training solution that is consistent with industry methodology and evaluation criteria. With universal gun handle design, system offers pre-installed basic GMAW (MIG) package and optional SMAW stick add-on package, providing training for flat plate, 2F/3F joints, and 1G, 2G, and 3G grooves. VRTEX® Mobile measures and records students’ training results in real-time to help identify welding deficiencies and strengths.

Strong Hand    Los Angeles, CA 90660
Nov 26, 2012 For flexible setup of dedicated, short run, or one-time-use fixtures, 24 x 36 in. FixturePoint Tabletop accommodates insertion of FixturePoint Clamps and Modular Fixturing Components via 16 mm holes in 2 x 2 in. grid pattern. FixturePoint Table, used with tabletop frame only and set on top of existing work surface, has max height of 6 ¼ in. Included leg frame allows setup of FixturePoint Table as stand-alone work surface with 34 in. max height; 4 leveling feet are included.

Strong Hand    Los Angeles, CA 90660
Nov 26, 2012 Siegmund Welding Table features 1-piece, 5-face design with 1 in. thick reinforced steel plate for rigid, flat work surface with load capacity of 3.5 tons and flatness within ±0.012 in. Each face is covered with 1 in. dia horizontal and vertical holes in 4 in. grid pattern. Grid lines on tabletop help align and position workpiece. Unit also features plasma nitriding finish that protects against weld spatter and corrosion and minimizes wear and deformation.

Kimberly-Clark Corp.    Roswell, GA 30076
Nov 26, 2012 Jackson Safety Balder W-70 BH3 ADF helmet provides uniform shade level across viewing area, while Balder W-40 SmarTIGer has auto-darkening filter to maximize optical clarity for welders. Helmets feature aerodynamic shell for fume deflection, mouth and nose protection to minimize CO₂ accumulation, and curved front plate to prevent heat buildup, reflections, and fogging. Also included is UV/IR protection up to shade 13. Solar-powered helmets meet ANSI Z87.1 high impact 2010 standards.

Protectoseal Co., The    Bensenville, IL 60106
Nov 14, 2012 Available in 20 models with ½, ¾, 1, 1 ½, and 2 in. NPT threaded connections, Series U1-45 is designed for installation in withdrawal lines of flammable or combustible liquid storage tanks. FM-approved units are normally held in open position by heat-activated element mechanism. In event of exposure to external fire source, element is activated, valve is closed by internal spring, and flow of liquid through line is stopped. Personnel never have to enter hazardous situation to turn off valve.

Reis Robotics    Elgin, IL 60123
Nov 06, 2012 With 135 x 12 x 3 m work envelope, Bridge Gantry Type RBP is suitable for railway vehicle construction, shipbuilding, steel construction, or wind energy power plant construction. System can be equipped with 2 robots in different configurations. Besides longitudinal and transversal axis of gantry itself, RV20-16 robot can be moved along vertical axis, for total of 15 axes. Alternatively, 3 hand axes of articulated-arm robot can be combined with 3 linear axes to achieve 6-axis robot.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 30, 2012 Available in sized packages ranging from medium to 2XL, Premium Welding Gear Ready-Pak® contains top-grade personal protection equipment for welding and other fabrication tasks. Each kit includes VIKING™ 3350 Series variable shade 6–13 black helmet, Shadow™ split leather sleeved jacket, leather MIG/Stick welding gloves, and leather SteelWorker® gloves as well as Finish Line™ clear safety glasses, split leather flame-resistant welding sleeves, flame resistant doo-rag, and industrial duffle bag.

Reis Robotics    Elgin, IL 60123
Oct 25, 2012 Featuring 20 kW capacity, Model RV60-26-FT includes hand axis in which laser beam can be set and aligned with additional adjusting features. All optical components in hand axis are continuously water-cooled. With integrated beam guidance, fiber optic cables are located in arm structure so that fiber supply does not form interfering edge that restricts robot's work envelope. Motor-driven focus adjustment enables energy density and beam diameter of component to be changed, optimizing processing result.

ReCoila    Kings Park NSW 2148  Australia
Oct 25, 2012 Gen III OA, OP, P, and A Series increase safety levels for maintenance teams by eliminating potential fire risk posed by hoses wrapped around bottles or trolleys. In addition to spring rewind latching system, reels feature impact- and corrosion-resistant outer shell encasing 8 or 15 m of 6 mm ID twin oxygen and acetylene or oxygen and propane hose. External swivel design provides added safety. Models to suit Propane and Argon are also available with 15 or 20 m of hose.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 25, 2012 Jessi Combs welding apparel, designed with input from celebrity welder of same name, features products tailored to and sized specifically for women. Specific products include Jessi Combs VIKING™ 1840 Series Amp Angel™ Auto-Darkening Welding Helmet with 90 x 110 mm cartridge and external continuous 9–13 shade control, Jessi Combs Women’s Shadow™ Welding Jacket, MIG/STICK Welding Gloves with Kevlar® stitching, and Jessi Combs Women’s Steelworker® Gloves with goat skin back.

Jenoptik Laser Technologies USA Corp.    Brighton, MI 48116
Oct 16, 2012 Suitable for welding plastic materials in automotive applications, JENOPTIK-VOTAN® W integrates switchable laser line which is moved along welding area via linear unit, enabling contactless processing of components with dimensions exceeding normal scan field of scanning system. Strength of welded joint achieves values of up to 90% of basic strength of material. With machine, welding of airbag chute channels in instrument panels and large car body parts is possible.