Water Purification

Related Categories
Chemical Processing & Waste Management, Waste Handling Equipment

Purification System produces Type I, RO-purified water from tap.

March 19, 2015

Offering all-in-one functionality from benchtop form factor, WaterPro® BT™ delivers ultrapure Type I, 18.2 megohm-cm, at >0.5 Lpm (typ) at inlet water temperatures of 25°C, either manually or volumetrically, directly from tap water. System also delivers Reverse Osmosis (RO)-purified Type III water, which is accessible via outlet valve and produced at up to 3 Lph (0.05 Lpm). Optional UV lamp further reduces bacteria and TOC levels necessary for life science applications. Read More

Waste Handling Equipment, Green & Clean

Ozone Disinfection System features chemical-free design.

March 18, 2015

Utilizing corona discharge process to produce aqueous ozone, portable FDA-cleared Ozone Disinfection System eliminates rinse and repeat cycles caused by chemicals and cuts disinfection time to under 1 hr. Ozone has no detrimental effect on bicarb and water system components. Adjustable gauges indicate proper vacuum levels for mixing ozone and water, while ozone gas off chamber removes excess gas not dissolved in water and runs it through ozone gas destruct device, returning it to oxygen. Read More

Waste Handling Equipment

Mobile Water Purification Systems offer 24/7 real-time monitoring.

January 29, 2015

Touchscreen-operated AFS® 40E/80E/120E/150E provide clinical laboratories with reliable water purification solution for daily water volumes up to 3,000 L. Elix® electrodeionization (EDI) and ERA™ (Evolutive Reject Adjustment) technologies enable production of water meeting Clinical and Laboratory Standards Institute® (CLSI®) Clinical Laboratory Reagent Water standards. Also included, real-time monitoring and remote control help maximize water purification system and analyzer uptime. Read More

Transportation Industry Products, Chemical Processing & Waste Management, Waste Handling Equipment

Wash Rack System captures and recycles 100% of wastewater.

January 8, 2015

As platforms for washing vehicles and other equipment, Hydropad systems capture and dispose of dirt and debris without compromising job site with contaminants brought in from job at hand or potentially letting them out into surrounding environment. Captured effluent can be diverted to Hydrokleen water filtration systems and sent back out to Hydroblaster washing system for 100% water efficiency. Portable units support loads from 2–70 tons, measure 8 x 20 ft, and can be linked together. Read More

Waste Handling Equipment

Water Recycler works with black oxide process.

December 5, 2014

Designed for use in new and existing TRU TEMP® low-temperature black oxide finishing lines, NEAR-ZERO™ Water Recycler allows user to recycle and re-use process rinse water by filtering out free and emulsified oil and detergent residues, reducing rinse water consumption up to 99%. System maintains rinse water pH at near neutral level for continual reuse. After about 1 month, filter media is changed, all 3 rinse tanks are changed and refilled with clean water, and cycle starts over. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Waste Handling Equipment

Water Quality Tester detects toxic metals.

June 3, 2014

Designed to determine toxic metal levels in tap water, SenSafe® Water Metals Check Test Strip develops red in presence of toxic metals above 10 ppb in 2 minutes. Product can detect cadmium, cobalt, copper, lead, mercury, nickel, and zinc (+2 valence metals), confirming need for filtration or remediation of any water. Instructions and color chart are provided. Read More

Material Handling & Storage, Waste Handling Equipment

Complete Chlorination System facilitates design, increases safety.

June 2, 2014

Chlorination SAFE Station (CSS) is composed of insulated fiber-reinforced plastic (FRP) building, gas feed equipment, gas detectors, scales, scrubber, controls, and safety equipment. While FRP building stores up to 15 cylinders, 150 lb EST™ type DHS 400 dry emergency chlorine scrubber. Latter treats accidental gas releases of chlorine/sulphur dioxide at leak rate in accordance with Uniform Fire Code requirements while constantly maintaining negative pressure in cylinder storage room. Read More

Green & Clean, Waste Handling Equipment, Materials & Material Processing

Remediation Substrate stops groundwater contaminant plumes.

May 30, 2014

Effective on wide range of organic contaminants, PlumeStop™ stops migrating groundwater contaminant plumes by rapidly reducing contaminant concentrations with sorptive medium while also enhancing or accelerating microbial-driven biodegradation processes. Colloidal biomatrix platform is designed to eliminate rebound, stop matrix back-diffusion, and meet stringent groundwater standards at contaminated sites. It can also protect sensitive environmental receptors such as streams, rivers, and ponds. Read More

Chemical Processing & Waste Management, Waste Handling Equipment, Materials & Material Processing

UV-Ozone Cleaning System produces results within minutes.

April 15, 2014

Along with UV grid lamp for uniformity, HELIOS-500 features digital process timer for accurate control and drawer loading sample stage that accommodates up to 5 x 5 in. substrates. Included pedestals allow for adjusting distance between UV source and substrate, while built-in hour-counter records total hours of UV lamp usage for maintenance purposes. Within minutes, system can achieve near atomically clean surfaces using 185 and 254 nm UV wavelengths and without damaging devices. Read More

Machinery & Machining Tools, Waste Handling Equipment

UV-Ozone Cleaning System accommodates 5 x 5 in. substrates.

April 8, 2014

Using HELIOS-500, near atomically clean surfaces can be achieved in minutes without damage to devices. System includes UV grid lamp, digital process timer, and hour-counter that records UV lamp usage for maintenance purposes. During photo-sensitized oxidation process, contaminant molecules of photo resists, resins, human skin oil, cleaning solvent residues, silicone oils, and flux are excited and/or dissociated by absorption of short wavelength UV radiation. Read More

Waste Handling Equipment

Water/Wastewater Treatment System enhances clarification.

February 6, 2014

Using magnetite to ballast chemical floc, CoMag® System enhances settling rates and performance of wastewater and water treatment operations in industrial water and wastewater treatment applications. System provides contaminant removal by reducing total suspended solids, total phosphorus, turbidity, color, pathogens, and metals. Able to be applied at any stage of treatment, system incorporates modified Lancy™ Solids Separator and employs sludge recycle function. Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Ultrafiltration System suits municipal water treatment.

February 6, 2014

Featuring modular design, MEMCOR® CP II Ultrafiltration Membrane System can accommodate up to 28 L40N-type membrane modules on single MemRACK™ unit, which integrates feed, air, filtrate, and waste headers into one assembly. Fully assembled, self-supporting racks are then manifolded together to form functional arrays. Minimizing backwash duration for maximum uptime, system has piping connections to facilitate installation, and side and top module access points for in-place service. Read More

Food Processing & Preparation, Material Handling & Storage, Waste Handling Equipment

Refill Station encourages sustainable hydration.

January 29, 2014

Providing 24/7 access to chilled, naturally filtered water, Wave Refill Station helps minimize use of disposable bottles in shared and high-traffic spaces, such as offices and gyms. Filtration process removes contaminants as well as unpleasant tastes and odors from water without removing health-essential minerals and nutrients. Utilizing 24/7 on-board health monitoring system, unit reports water quality to WaterFillz Clean Team for quality assurance. Read More

Waste Handling Equipment

Water Purifiers/Generators provide fresh, potable water.

September 13, 2013

Using multi-barrier filtration, battery-operated and back-carried SPRING purifies water of chemical and microbiological contaminants. Unit weighs 12 kg, complies with military water standards, and can purify 45 gal of water per single battery at flow rate of 10–15 gal/hr. Leveraging GENius™ heat exchange technology, GEN-350G Atmospheric Water Generation Unit creates 450 L of water per day directly at point of use from natural humidity at efficiency of 310 kW-hr/L. Read More

Fluid & Gas Flow Equipment, Waste Handling Equipment

Drinking Water Purifiers target marine market.

July 24, 2013

Eliminating need for traditional pressure vessel housings, Nature Pure® QC Drinking Water Purification Systems utilize replaceable canisters that are hand turned into stainless steel interface units with integral stainless steel mounting brackets. There are no v-clamps, shear rods, toggles, or similar closures. Offering flow rate of 2.3 Lpm and average capacity of 3,000 L, point-of-use systems provide particle retention rating of 0.4 micron. Read More

Controls & Controllers, Waste Handling Equipment

Industrial Grade Control Panel suits water and sewage systems.

July 22, 2013

Designed to control two 3-phase pumps in industrial and commercial water and sewage systems, Model 32S covers wide variety of pump motor amperage requirements by field installing overload modules, up to 32 A each. Panel is rated 10 hp max at 208, 240, 480 V, 3-phase. Housed in padlockable stainless steel NEMA 4X enclosure with tri-voltage step-down control transformer and separate alarm/control fuses, panel uses standard 4 float operation: off, lead start, lag start, and high level. Read More

HVAC, Machinery & Machining Tools, Robotics, Waste Handling Equipment

UV Disinfection Robot utilizes web portal system.

June 13, 2013

Supplied with TRU-D SmartUVC™ portable UV disinfection robot, iTRU-D includes combination of microchips operated remotely via iPad Mini, allowing hospitals to track infection control efforts. Hospital staff can operate, monitor, and manage TRU-D while simultaneously uploading disinfection data automatically to live web portal. Administrators will have instant access to real-time UV-C disinfection readings, including disinfection times, progress, dose delivery, and location of device. Read More

Waste Handling Equipment

Fractional Electrodeionization Stacks minimize piping.

June 12, 2013

Designed to accommodate different feedwater chemistry, MEGA FEDI 2 and MEGA FEDI 2-HF are suited for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, refinery, and electronics for high-purity water needs. Each stack can handle treated water flow up to 75 gpm, equivalent of 17 m³/hr. Stackable design minimizes piping and facilitates installation on skids. Read More

Waste Handling Equipment

Electrodeionization Products help advance water purification.

April 18, 2013

FEDI®-2Rx Fractional Electrodeionization products are designed for pharmaceutical, biomedical, and laboratory applications where installations require hot water sanitization to meet pharmacopoeia standards for Purified Water (PW) and Water For Injection (WFI). With dual voltage technology, FEDI represents next generation of electrodeionization (EDI) technology for production of high-purity water. Read More

Cleaning Products & Equipment, Waste Handling Equipment

UV Disinfection System kills bacteria in municipal wastewater.

January 28, 2013

Using microwaves to energize electrodeless lamps that generate UVC output to 254 nm, MicroDynamics® Series OCS721 meets dose, log reduction, and water quality requirements for variety of applications. Open-channel system features MicroPace™ flow pacing technology that can match UV dose, allowing accurate control of operating conditions in real-time to save energy. In addition to inactivating pathogenic organisms in wastewater, system is validated for water reuse by NWRI. Read More