Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Jun 23, 2005 Suited for heavy, solids-laden wastewater applications, TASKMASTER TM1600 Grinders process gravity or conveyor fed sewage screenings and provide in-channel grinding as well as bulk solids shredding. Twin-shaft Model TM1634 features 16 x 34 in. cutting chamber, right angle planetary gear reducer, and counter-rotating shredding mechanism employing cutter cartridges. Hardened alloy 2¾ in. hexagonal shafting handles up to 15 hp motor and drives.

Sanitaire
Brown Deer, WI 53223 1472
May 19, 2005 Membrane Bio Reactor combines diffused aeration and biological treatment with membrane filtration to produce reusable water in 8 hr. After air is added to incoming effluent, bacteria reduce organic content. Stage 2 filters water through membranes resembling rows of straws with microscopic pores that draw clear liquid into them while keeping solids out. System can be operated automatically from computer, without any human interfaces.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.
Walpole, MA 02081
Feb 25, 2005 Suited for unattended operation, Ultrafiltration Model UFV 250/500T is equipped with mop bucket station to receive water from floor scrubbers or hand buckets, 180 gal process tank with level controls, and 50 gal cleaning tank. Options such as transfer pumps and free-oil removal separator are available. System is suited for processing oily manufacturing wastes such as used coolants, floor washings, aqueous parts washer discharges, and vibratory finishing effluents.

OilTrap Environmental
Tumwater, WA 98512
Feb 18, 2005 Suited for treating wash water generated from washing vehicles and equipment, ElectroPulse Model EP-SD3 handles flow rates from 3 gpm to 750 gal/day. Electricity-based electrocoagulation technology removes contaminants that are impossible to be removed by filtration or chemical treatment systems, such as emulsified oil, TPH, suspended solids, and heavy metals. Fully automated, modular system has no filters to clean or replace and does not require use of chemicals.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Feb 16, 2005 Spiralift® VL conveys material straight up vertically oriented transport tube, making it suited for tight spots such as pump stations and wet wells. Shaftless auger screw clears solids from stainless steel cylindrical screen. Unit is supplied with tube washing spray manifold, screen brushes, perforated stainless cylindrical screen, stainless steel housing, 1½ hp motor, helical gear drive, system controller, and level sensor.

Riveer Co.
South Haven, MI 49090
Dec 13, 2004 Cyclonator® II is a stainless steel filtration system for use with modular, aboveground wash pad or with existing sump or trench drain. Featuring no-bypass filtration, continuous ozone injection, and 1-button operation, system is suited for removing mud and grease from equipment or pre-treating parts before painting. It includes Allen-Bradleyâ„¢ touch-safe electronics, ITT Gouldsâ„¢ pumps, Nash-Elmoâ„¢ regenerative blower, and Ronningen-Petterâ„¢ absolute filters.

OilTrap Environmental
Tumwater, WA 98512
Oct 01, 2004 ElectroPulse EP-1WR and EP-2WR are designed for wash water generated from washing vehicles and equipment. They process up to 100 gpm, producing product that can be recycled or discharged to sanitary sewer. Systems use electrocoagulation technique to remove contaminants that cannot be removed via filtration or chemical treatment systems. Modular products, packaged with on-board automation, include no filters to clean or replace.

Hielscher USA, Inc.
Ringwood, NJ 07456
Sep 22, 2004 Model UIP16000 provides continuous power of 16,000 W with over 80% efficiency. Generator, transducer, and flow cell are housed in 2 connected stainless steel cabinets. If required, generator cabinet can be located up to 10 m from transducer with flow cell. Independent cooling system eliminates contact between aggressive air or dust and electric components. Operation can be controlled and monitored by power meters, status displays, and remote electric interfaces.

OilTrap Environmental
Portland, OR 97230
Jun 17, 2004 ElectroPulse uses electrocoagulation for treating complex waste streams on-site. It can remove variety of contaminants that are impossible to be removed by filtration or chemical treatment systems such as emulsified oils, TPH, suspended solids, and heavy metals. Heavy metals are reduced to hydroxide, allowing sludge to pass a TCLP test. With fully automated ElectroPulse system, there are no filters to clean or replace.

Smith & Loveless, Inc.
Lenexa, KS 66215 1234
Jul 18, 2003 Modular FAST® aerobic treatment system uses Fixed Activated Sludge Treatment to lower BOD and TSS levels in high strength wastewater streams. Fixed film reactor with submerged media combines aeration, clarification, and digestion. System provides safe, onsite pretreatment for flows up to 150,000 gpd, allowing discharge to leach field, lagoon, constructed wetland or city sewer. It installs above or below ground and requires no daily attention.

Master Chemical Corporation
Perrysburg, OH 43552
Jul 14, 2003 Waste Whacker™ System uses ozone and flocculant material to totally encapsulate solids, oils, and trace metals so they can be disposed of as unregulated solid waste. It consists of stabilization columns/tanks, wetting chamber for mixing custom-milled and formulated flocculant material with fluid, and filter media for separating processed water and solids. Operation is fully automated, and equipment can be used in batch mode or operated continuously. It processes 1–6 gpm.

Landa Water Cleaning Systems
Camas, WA 98607
Jun 27, 2003 Model EC-20 ElectroClear (EC) system uses electrocoagulation to processes complex wastewater streams at rates up to 20 gpm. System also removes contaminants such as emulsified oils, Total Petroleum Hydrocarbons, petroleum products, suspended solids, and heavy metals. EC-treated wastewater can typically be recycled or discharged to sanitary sewer. System is fully automated and employs no filters.

Severn Trent Services
Fort Washington, PA 19034-2707
Jun 20, 2003 Offered with integrated controls for automated operations, alarm indication, and system shutdown, ADVANCE® Series PDS Precision Dosing System employs one hydraulically balanced pump. Pre-assembled, pre-wired packaged skid system precisely injects liquid chemicals across various applications and operating conditions. System features corrosion-resistant materials for wetted components in single and multiple-pump system arrangement.

USF Surface Preparation Group
Newnan, GA 30265
Apr 01, 2003 Walther Trowal® ZM 01-ECO Centrifugal Effluent Cleaning System cleanses wastewaters of abrasives, metal fines, and oils after finishing process. Direct drive motor generates 2150 g's of centrifugal force to separate processed water from solid sludge. Electro-generatory brake averages stopping speed of 20 sec. Clean water discharges directly to vibrators and residual water is removed to mud water tank. System includes electric stirrer and power switch.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Mar 31, 2003 Dimminutor® Model 36HF offers automatic screening and disintegrating of wastewater solids in straight through channels and wet wells. Employing continuously rotating, cantilevered design, unit reduces plastics, wood, rags, and other solids to fine bits. Features include 3 individually replaceable cutters, oil lubrication, and intrinsically open design to handle up to 29 mgd of wastewater. Product passes flow unobstructed, even during reversing cycles.

Landa Water Cleaning Systems
Camas, WA 98607
Mar 17, 2003 Using PLC, Model CLP-9044 automatically backwashes filters, polishes standing water during night, and eliminates sludge buildup on regular cycle. Microprocessor-controlled system also offers manual override to automated operations. System components include multi-media and activated carbon filters; painted-steel, 6 x 9 ft platform; separate, 600 gal, cone bottom tank; and raised, solids separation, and clarification tank.

Landa Water Cleaning Systems
Camas, WA 98607
Feb 27, 2003 ElectroClear (EC) system uses electricity-based technology for on-site treatment of complex waste streams. Treatment process removes contaminants such as emulsified oils, TPH (Total Petroleum Hydrocarbons or petroleum products), suspended solids, and heavy metals. Automated EC system has no filters to clean and is capable of handling waste stream flows up to 50 gpm and higher. Treated wastewater can typically be recycled or discharged to sanitary sewers.

Bioscience, Inc.
Bethlehem, PA 18017
Feb 18, 2003 MICROCAT®-DNT Drain and Trap Cleaner, suited for institutional drain and trap cleaning, consists of adapted microorganisms that liquefy fat, oil, and grease to prevent blockages. It also contains enzymes and biodegradable surfactants to keep drains and traps free flowing. MICROCAT-DNT-TH has additional microorganisms that reduce sulfur-containing gases, while MICROCAT-DNT-HT contains heat-resistant enzymes that dissolve deposits in severe environments.

Mart Corp., The
Maryland Heights, MO 63043
Jan 08, 2003 Model EQ-1 reduces aqueous waste volume up to 90% and total waste volume to less than 10%. Product reclaims up to 85% of active chemical for reuse in process, allowing users to recycle clarified solution in cleaning process. Approved by Environmental Technology Verification Program, product meets all discharge parameters to allow solution to go to sanitary sewer or POTW, and encapsulates waste products for safe disposal in sanitary landfill.

E T Environmental
Lindale, TX 75771
Dec 02, 2002 Model CE-400 fits in any application requiring treatment of volumes between 400 and 18,000 GPD of water and sludge. Automated system utilizes Allen-Bradley Micrologix PLC controls with full analog pH capabilities.