ITT Flygt Corp.
Trumbull, CT 06611
Nov 19, 2002 FloGet provides mixing and simultaneous aeration of all types of liquids. It incorporates submersible pump, air suction tube, and ejector/diffuser nozzle. System is suitable for any type of tank regardless of size, shape, or depth. Using different ejectors, FloGet can perform different tasks, including oxygenation, CO₂ neutralization, sludge recycling, ozone treatment, mixing, foam suppression, and homogenization.

Landa Water Cleaning Systems
Camas, WA 98607
Oct 23, 2002 Model PM-1000D uses bioremediation to eliminate odors, oil, and grease in wastewater collection pits. All natural, environmentally friendly method of managing standing wash water automatically injects air and microbes into collection pit. Microbes in BioStax 900 agent consume and convert oils, greases, hydrocarbons, and organics into water and carbon dioxide. Air passes through sandstone diffuser to dissolve oxygen for optimum life and growth of microbes.

Zebra Skimmers
Solon, OH 44139
Sep 24, 2002 Zebra Muscle™, consisting of skimmer, aerator, and oil separator, includes spin-welded fittings to create leak-proof skimming system. Available in 3 different models, system includes non-kinking, crush-resistant coolant hose, 1 gpm submersible pump, and translucent 15 gal barrel. Zebra Muscle aerates, filters, and separates coolant from tramp oil so that coolant lasts longer.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Sep 16, 2002 Series CLC Coalescers/Separators have 2-stage design that allows them to remove 99% of all liquid and solid particulate matter larger than 4 microns from air and gas streams. Units have no moving parts to fail or wear out. Applications include compressed refrigeration gases, evaporator overhead steam, high pressure gas at injection wells, fuel gas lines to engines in power and industrial plants, and regulator stations.

WTW Measurement Systems, Inc.
Ft. Meyers, FL 33916-7597
Aug 27, 2002 TresCon™ Uno on-line, single-channel analyzers are designed for control and surveillance at wastewater treatment plants. Analyzers offer automatic diagnosis functions and modular design that permits analyzer module changes as desired. Offerings include graphic displays, 3 analog outputs, 12 relay contacts, RS 232 interfaces, RS 485 interfaces, and controller functions (PID, pulse-width, frequency).

VERwater Environmental, LLC
Salina, KS 67401
Aug 15, 2002 Water Reclaim System is virtually maintenance free, with no filters to replace and no media to change. System continually infuses correct amount of oxygen into wastewater to activate aerobic bacteria to reproduce and consume organic materials such as waxes, detergents, and oily emulsions.

Zebra Skimmers
Solon, OH 44139
Aug 08, 2002 Muscle™ coalescing system can be customized with several options to meet machine shop needs. Regular, Plus, and Deluxe option packages are designed for portability, filtering, coalescing, improved separation, and fluctuating fluid levels. Options include: Sumpster, to remove floating oils; Coalescing Cartridge, to increase surface area; Fine Stopper, to remove floating chips and swarf; Oxygenator, to kill anaerobic bacteria; and Drum Dolly to provide portability.

Westfalia Separator, Inc.
Northvale, NJ 07647
Jul 31, 2002 HyVOL separators and clarifiers offer sealing technology that is 100% wear free and requires no water for operation. Hydrohermetic seal uses milk itself as seal and never needs maintenance. Units feature high-capacity designs, USDA accepted solids discharge, and low energy requirements.

Pollution Control Systems, Inc.
Milford, OH 45150
Jul 12, 2002 Pre-engineered and pre-fabricated package biological wastewater systems are designed for treatment of domestic wastewater flows from small, medium, and large municipalities. Sizes range from 500 to 100,000 gpd and larger. Steel fabricated structures feature weather- and environmental-resistant coatings. Units are designed to meet prevailing regulatory authorities at point of installation.

Hancor, Inc.
Findlay, OH 45839
Jun 24, 2002 Narrow EnviroChamber is made from HPDE with open bottom, solid top, and louvered sidewalls. Effective infiltrative area is more than 50% greater than stone and pipe leach field system. Sidewall has louvers to help prevent soil intrusion and allow more oxygen transfer through soil. Snap on end plate eliminates need for screws and power tools. Strong and lightweight HDPE material means no heavy equipment is needed, allowing fast installation with less backfill.

Monitor Technologies, L.L.C.
Elburn, IL 60119-8048
Jun 06, 2002 Without noise or vibration as caused by pneumatic or electric vibrators, Evasser bin aerator promotes flow of dry bulk powders from storage vessels. Its effective radius is 12 in., and various configurations are available to fit bulk powders and granular solids applications. Evasser is available in cast iron or 316 stainless steel construction. Normally supplied with black Neoprene boot, FDA approved white Neoprene boot is also available.

Landa Water Cleaning Systems
Camas, WA 98607
Apr 17, 2002 Field-installed Automatic Maintenance Control (AMC) Retro Kit, designed for company's wash-water recycling systems, automates routine monitoring and maintenance so water stays cleaner and equipment functions better. Models include APS-1000, ABS-2000 and AMC-3000.

Hydro-Blast Inc.
Clackamas, OR 97015
Apr 15, 2002 HYDRO-VAP(TM) 1000E runs at 3 to 4 gph to provide 95% reduction in wastewater. Evaporator heats wastewater to boiling and turns it into vapor. Harmless water vapor is vented through blower-assisted stack and exhausted to outside atmosphere.

Moyno Inc.
Springfield, OH 45501 0960
Apr 10, 2002 2000 HS System, designed for transferring dewatered sludge in municipal wastewater treatment, features integral hopper with twin-screw auger feeder and Model 2000 G4 progressing cavity pump for handling semi-dry, high solids content material. Feeder supplies constant pressurized feed rate to pump resulting in 100% pump cavity fill rate. Configurations include: C-Flow, S-Flow, T-Flow, U-Flow, and Z-Flow.

Lakeview Engineered Products, Inc.
Fort Wayne, IN 46802
Apr 09, 2002 E-100 Hot Shot electric powered, wastewater evaporator processes 7 gallons per hour. Constructed of stainless steel, it includes side mounted heating elements, counterweighted air cooled lid, and self-cleaning backward inclined radial blade impeller. Belt driven blower, NEMA 4 industrial duty control panel, redundant level controls, and safety devices are also included. Unit is factory adjusted, tested, and ready for operation with line connection.

Bindicator
Spartanburg, SC 29306
Apr 08, 2002 Bin-Flo(R) Aerator restores original capacity of any dry, pulverized material to flow readily from bins, hoppers, or through chutes. This flow characteristic exists when air is present in material. After storage, air escapes, allowing material to pack, thus preventing flow. Aerator replaces air so material again moves freely. Aerator layout can be designed for any variations in bin size and design.

Monitor Technologies, L.L.C.
Elburn, IL 60119-8048
Jan 31, 2002 Monitor rectangular air pad promotes flow of dry bulk powders in storage vessels. By continuously introducing air into body of dry powder, air pad is able to maintain fluid like characteristic of aerated powder. Its effective radius is 10 in., and it can adapt to most bin configurations. External mounting kit is available. Air pad is suitable for dry powder applications including cement, resins, and carbon black.

Netzsch, Inc.
Exton, PA 19341
Jan 04, 2002 CONTIPRESS dewatering filtration system is available in 11 different sizes, and is suitable for dewatering slurries and suspensions. It operates at slow revolutions (0.5 to 2.0 RPM) producing very low noise level. Sludge cake that is produced after thickening, dewatering, and squeezing is continuously discharged; no manpower is necessary to operate system.

MTS/Mass Transfer Systems
Walpole, MA 02081-2558
Nov 16, 2001 Multi-Aspirator mixes and aerates screened municipal or industrial wastewater containing up to 6% solids, and aspirates oxygen at liquid depth of up to 28 ft, all without need for blower. It can be dry-installed in empty tank or wet-installed in tank containing wastewater or sludge. Unit has stainless steel lifting harness and is simply lowered in place with crane. Anchors are not required to keep unit in place as it operates.