Miller-Leaman, Inc.
Daytona Beach, FL 32114
Dec 08, 2006 Made from injection-molded plastic, Helix point-of-use filters include HD Series with polypropylene disc media and HS Series with stainless steel screen. As dirty water enters filter housing, high-velocity spinning action occurs, spiraling heavier particles such as sand and sediment away from disc/screen cartridge, down to base of filter housing. Accumulated particles are then flushed from filter via ¾ in. flush port connection.

PSI Water Systems Inc.
Manchester, NH 03102
Nov 27, 2006 ENCON Mechanical Vapor Compression (MVC) Evaporator can simultaneously process multiple industrial waste streams and yield clean distilled water. With no filters to unclog, no sludge pits to empty, and no chemicals to mix, system minimizes requirement for manpower intervention and reduces costs associated with wastewater disposal. Evaporator, available in capacities from 75-1,500 gph, removes oils, soaps, solids, and hundreds of other contaminants.

SPEX CertiPrep, Inc.
Metuchen, NJ 08840
Oct 05, 2006 To facilitate dilutions when assembling VOA calibration standards, 60 BIG MIX eliminates mixing of 6-8 different blends. This conserves time and results in more consistent product with optimal quality control. Packaged in one ampule, product combines 60 routinely analyzed volatile compounds for EPA methods 524.2, 624, and 8260. It comes in three different concentrations: 100, 200, and 2,000 µg/mL in P and T methanol.

CEP Sorbents
Pasadena, TX 77503
Aug 22, 2006 Hi-Loft SuperSorb Pads are suited for small spills where extra absorption is required. Quilted Hi-Loft technology ensures maximum amount of petroleum-based liquid is absorbed by each pad, and polypropylene construction lends to product durability. Able to absorb up to 25x its weight in liquid, pads are incinerable and non-toxic.

TecHarmonic, Inc.
San Jose, CA 95119
Aug 04, 2006 Powered by electric heaters that completely eliminate use of methane, Alpine-S is capable of abating all process and PFC gas emissions with destruction and removal efficiencies (DREs) of over 95% for both chemical vapor deposition and etch applications. Flameless, catalytic decomposition reactor operates in range of 850-950°C, while vortex device removes heat, particles and water-soluble acids, and helps to extend preventive maintenance cycle times.

JWC Environmental
Costa Mesa, CA 92626
Jul 05, 2006 Auger Monster® XD systems remove and clean flows and solids loading levels in small to medium institutions. Along with 40 in. tall cutter stacks utilizing Macho Monster technology, products feature 10 hp motor on cutting chamber's 2 shafts of 7½ in. cutters to handle large and difficult solids. Single- and double-drum models feature mechanical seals with hex driven design, and operator interface controllers allow on-the-fly changes.

Pall Corp.
East Hills, NY 11548
Jun 16, 2006 To help overcome production bottlenecks caused by capacity and production purification problems as well as demand for protein-based drugs, BioSepra® PPA and HEA HyperCel(TM) mixed-mode sorbents offer chemistries and separation options for purifying proteins. Environmentally friendly products do not require lyotropic or other salt additives. Ranging from orthogonal to other chromatography steps, additional selectivity options for protein capture or fractionation are provided.

Natural Environmental Systems L.L.C.
Dallas, TX 75254
May 18, 2006 Natural Enviro 2000 consists of 100% all-natural solution featuring billions of live microorganisms that have been aged and fermented using natural biological process. Bacteria break down and aerobically digest waste in drain lines and septic tanks while restoring biological activity to system. Microbes also add oxygen to environment that works to reverse anaerobic process, eliminating noxious odors. Chemical-free solution is safe for commercial or in-home use.

JNJ Industries Inc.
Franklin, MA 02038
Apr 26, 2006 Designed to promote RoHS-compliance, Lead Eliminator uses chelating agents and other ingredients to lift and remove lead and heavy metals from surfaces such as Formica, stainless steel, aluminum, and Lexan. Low-toxicity product is available in 1-pint spray bottles or 6 x 9 in. saturated wipes with one abrasive side and one smooth side. Dual-action remediation wipes and sprays effectively remove heavy metals, soil, and residue from affected areas.

CEP Sorbents
Pasadena, TX 77503
Apr 26, 2006 Offered in both 5 and 8 in. diameters and 10 ft lengths, biodegradable Polypropylene/Cellulose Sorbent Booms are designed for petroleum-based liquid spills in water or on land. Each section is equipped with durable sock and netting for non-shed design. Available in bright white, non-toxic products include rope and snap clips for deployment and retrieval.

Koch Membrane Systems, Inc.
Wilmington, MA 01887
Mar 16, 2006 Designed for ultrafiltration of industrial process streams and wastewater, INDUCOR(TM) and INDUCOR-G modules utilize KMS PVDF ultrafiltration membrane suited for treatment of oily wastes and metal hydroxide wastes. INDUCTOR modules are configured with ½ in. dia tubules, while INDUCOR-G modules have 1 in. dia tubules. Applicable for systems with flow rates of 100,000 gpd and higher, open channel configurations are tolerant of high-solids streams.

OilTrap Environmental
Tumwater, WA 98512
Feb 07, 2006 Fully automated Models EP5-WR and EP10-WR ElectroPulse systems treat wash-water generated from washing vehicles, equipment, and stormwater run-off in asphalt industry. Electrolytic-based electrocoagulation technology removes emulsified oil, TPH, suspended solids, and heavy metals without use of filters or chemicals. Treated water can be recycled or discharged to sanitary sewer. System is also suited for equipment washing, aircraft refurbishing, and metal parts deburring.

JWC Environmental
Costa Mesa, CA 92626
Aug 31, 2005 Combining rotating drum screens and Muffin Monster® grinder, Channel Monster® XD grinds difficult solids to manageable particle size, protecting downstream equipment and preventing pump blockages. Models with stack height greater than 32 in. feature 40000 Macho Monster grinder technology, with 2½ in. hex drive shafts and 7½ in. diameter cutters. Powered by 5, 10, or 15 hp motor, Channel Monster handles flows greater than 10 mgd.

Transpo Industries, Inc.
New Rochelle, NY 10801
Aug 26, 2005 Fit to any flat-grated or combination curb-grated catch basin, EnviroSafe™ captures and retains pollutants from stormwater run-off. Product provides over 7 ft³ of storage for sediment (28 x 44 in. size) and employs hooded bypass that eliminates flooding potential while retaining captured sediment and debris. Available in rectangular and circular configurations, product accepts cartridges that may be configured to target particular pollutants.

Koch Membrane Systems, Inc.
Wilmington, MA 01887
Jul 29, 2005 PURON® Modules are intended for membrane bioreactor treatment of municipal and industrial wastewater. Hollow fiber membranes, 2 mm in diameter, with pore size of less than 0.1 µm, are bundled in single header at lower end. Each hollow fiber membrane filter is sealed at upper end and allowed to float freely. With water flowing from outside to inside of filters, solids and particulates are blocked by membrane and remain on outside, while permeate is withdrawn from inside of fibers.

Moyno Inc. Unit Of Robbins & Myers, Inc.
Springfield, OH 45501 0960
Jul 27, 2005 For close-coupled configurations, 2000 CC pump features sealed Ultra-Drive® universal gear-joint drive train and optimized rotor/stator pumping element geometry. Annihilator™ grinders are twin shaft solids reduction units with optimized cutter combinations and one-piece flange housing. Able to handle dewatered municipal sludge to over 50% solids, 2000 HS System features integral hopper with twin-screw auger feeder and progressing cavity pump.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Jun 23, 2005 Suited for heavy, solids-laden wastewater applications, TASKMASTER TM1600 Grinders process gravity or conveyor fed sewage screenings and provide in-channel grinding as well as bulk solids shredding. Twin-shaft Model TM1634 features 16 x 34 in. cutting chamber, right angle planetary gear reducer, and counter-rotating shredding mechanism employing cutter cartridges. Hardened alloy 2¾ in. hexagonal shafting handles up to 15 hp motor and drives.

ABS Pumps
Meriden, CT 06450 7156
Jun 22, 2005 Featuring frequency converter and magnetic bearings, HST Integral™ High-Speed Turbocompressor automatically senses and compensates for surge conditions and maintains steady aeration flow in wastewater operations. It has non-contacting rotating parts, so there is no need for oil lubrication or fluid cooling systems. Automated PLC monitor handles multiple compressors, variable process changes, speeds, and power off and on functions without operator input.

Cyclonaire Corp.
York, NE 68467-0366
Jun 02, 2005 Available in kits for installation in bins, hoppers, silos, and bulk carriers, VibraPad™ Aerators increase rate and consistency of flow for dry bulk materials. Products combine fluidizing air with mechanical vibration to set dry bulk materials in motion, eliminating bridging, rat-holing, and compacting of dry bulk solids. Units are abrasion-resistant for use with most dry solids and are offered in silicon rubber or neoprene for sanitary applications.

Moyno Inc. Unit Of Robbins & Myers, Inc.
Springfield, OH 45501 0960
May 31, 2005 Self-contained Pipeliner™ Grinder eliminates ragging in secondary and tertiary sludge applications. Single-shaft unit features tungsten carbide adjusting cutters, spring-loaded cutter assembly that maintains constant force against shearplate, on-site cutter replacement without disconnecting piping, and single mechanical seal with silicon carbide faces. Standard shearplate hole is 15 mm, with optional hole sizes of 6, 8, 10, and 20 mm available.