WARDJet, Inc.    Tallmadge, OH 44278
May 24, 2013 Offered as standalone system, WARD Pro extends life of consumables for waterjet companies of all sizes. System takes sludge abrasive (generally collected and disposed of) from tank; separates only good, reusable abrasive; and dries it. At least half of sludge abrasive is typically recoverable as usable abrasive which cuts at same speed with same flow rate as new.

Eriez Magnetics    Erie, PA 16506
May 24, 2013 Using underflow processing, 84 x 60 in. P-Rex84 Scrap Drum optimizes fluff removal and metals recovery. Unit provides maximum edge-to-edge separation and does not decline in performance with heat rise. Permanent magnet extends to edge of drum, while ferrous material is transferred and flipped from magnetic pole to magnetic pole, allowing high-efficiency separation. Product relies on attractive magnetic force and uses no electricity.

Hunter Foundry Machinery Corporation    Schaumburg, IL 60196
Apr 23, 2013 CESAR™ (Contain, Evacuate, Separate And Recover) vacuum pattern spray recovery system helps provide cleaner, safer sand foundry work environment. In operation, this closed-loop system executes containment and collection of unused sprayed materials; air-powered, vacuum-evacuation removal of spray fumes; cyclonic separation of usable liquid from the fumes; as well as recovery, recycling, and reuse of fluid. Operation also contributes to environmental initiatives.

Airgas    Radnor, PA 19087
Aug 01, 2012 Used for reclamation of used refrigerant gases, Airgas Refrigatron(TM) system streamlines movement, analysis, evacuation, and storage of contents from returned gas cylinders. Multiphase system can reclaim used refrigerant gases to 99.8% purity, facilitating resale efforts. Using 2 zero-gravity lifts to move cylinders and 2 in-line gas chromatograph mass spectrometers, system renders ARI-700 specification result and records it for labeling and future use.

Aqueous Technologies Corp.    Chino, CA 91708
Apr 13, 2012 Used with batch-format or inline defluxing systems, EcoCycler provides capture, filtration, re-deionization, and reuse of rinse water. Low and high level float switches allow for automatic water replenishment and protection against dry-run operation. Constructed of corrosion-resistant welded polypropylene, EcoCycler has built-in stainless steel recirculation/filtration pump that directs waste rinse water through dual particulate filters, and carbon and resin media tanks.

REVEND RECYCLING LIMITED    Kenley.Surrey   United Kingdom
Dec 15, 2011 Complying with EU and USA environmental and recycling standards, reVend® Reverse Vending Recycling Machine provides automated collection and recycling of domestic light bulbs, including incandescent, CFL, and LED bulbs. Automated soft drop system lowers light bulbs into special collection container, while internal mercury fume extractor and filter absorbs/removes any escaped mercury fumes. With optional add-on unit, system can also collect and recycle domestic batteries.

Phoenix Technologies    Bowling Green, OH 43402
Mar 03, 2011 With footprint of 1,000 ft², Recycled Polyethylene Terephthalate System uses virtually no water and only 2.3 million kWh of electricity annually. Small capacity system can produce up to 4 million pounds of rPET annually. LNO(TM) process, relying on extremely small particle size technology, enables efficient decontamination and produces rPET with optimal color and yield, suitable for variety of food and beverage applications and various package types.

GaiaRecycle    Palo Alto, CA 94301
Feb 09, 2011 During 8-11 hr processing cycle, Model G-300CD reduces animal carcass weight and volume by up to 75%, removes odors through 6-step deodorizer process, and produces sterilized compostable output material. System employs patented shredder and blade technology, accelerating organic decomposition process based on drying, sterilizing, and grinding waste. Capacities range from 66 lb to 2 tons/day for small and mid-size users and up to 100+ tons/day for large recycling plants.

Appleton Mfg. Div., Productive Solutions, Inc.    Neenah, WI 54957
Oct 13, 2010 Customized per application requirements, Safe-Slab Core Recycler comes in light-, medium-, and heavy-duty variations that safely and automatically remove leftover roll material so cores can be reused. Blade-free slabbing and core recycling units handle rolls up to 32 in. dia, up to 96 in. long, and up to 1,000 lb. With variable unwinding speeds, unit plugs into any grounded 110 V electrical outlet, and compact design enables use in space-constricted areas.

UNTHA shredding technology    Kuchl A-5431  Austria
Jul 27, 2010 Specifically designed for wood, plastics, and paper recycling industries, VR Series features fail-safe cutting system, constant material feed, and maintenance-free pusher system. Touch screen panel simplifies operation, while gear unit, integrated into rotor, eliminates problems of shaft stubs. Drive design allows for high throughput with low drive power.

Cumberland Engineering Corp.    South Attleboro, MA 02703
Jul 20, 2010 Offered in 20 x 28, 20 x 36, and 20 x 48 in. sizes, CT500 Series is suitable for recycling of large containers and blow molded objects. Series includes 3- and 5-knife rotor models with 20 in. cutting circle for optimized part ingestion. Rotational end discs provide clean, dust-free granulation without angel hair or smearing. Safety interlocked, rear access hopper facilitates cleanout and inspection, while front hopper access door completely opens up for maintenance.

Industrial Conveying (Aust) Pty Ltd    Victoria 3552  Australia
Apr 01, 2010 Consisting of trommel and associated conveyor systems, custom Waste Handling System almost completely eliminates manual intervention. Used for primary sortation of co-mingled products, 2-stage trommel sorts beverage containers such as plastic, glass, and ferrous items. Stage 1 uses small diameter holes in screens to take fines out of system, while Stage 2 has larger diameter holes to separate containers and paper. Any paper/cardboard product in mix is conveyed away to secondary sorting system.

Rubbermaid Commercial Products LLC    Winchester, VA 22601
Mar 17, 2010 Designed to meet or exceed EPA guidelines, Element Indoor Recycling Stations provide centralized collection for multi-stream waste and recycling sortation. Smooth Uni-Koat® powder coated finish, in Silver Metallic or Desert Pearl, resists scratches and fingerprints and facilitates cleaning. In 4-stream configuration, Element Stations can hold up to 57 gal of waste and recyclable materials. Piano-hinged doors are available with optional lock to secure contents and deter theft and vandalism.

Eriez Magnetics    Erie, PA 16506
Oct 26, 2009 Offering responsible method for safe recovery and recycling of e-scrap materials, multi-stage EcoTowerSort(TM) can be used for sorting of aluminum, stainless steel, copper cables, and heavy fractions. Machines are available in widths of 24-118 in. with choice of bottom or top blowing discharge designs. Utilized within vertically stacked system, modular sorting technologies can include rare earth drum separators, eddy current separators, inductive sensor sorter, or any combination thereof.

Harris    Tyrone, GA 30290
Oct 20, 2009 Featuring 18 x 7 ft footprint, HLO 5443 offers baling cycle time of 7.6 sec using twin 25 hp motors. High volumetric displacement enables production rates up to 14 tons/hour. Economy mode shuts down one 25 hp motor to save energy, while rear access doors enable access to cylinders, and stamper automatically removes jams at shear knife. With max operating pressure of 3,000 psi and ram face pressure of 114 psi, baler is suited for processing OCC, ONP, PET, and plastics.

Multiquip Inc.    Carson, CA 90746
Aug 06, 2009 Easily attached to skid steer loader or forklift, EZ Grout Hog Crusher can recycle most job site materials such as brick, block, stone, rock, asphalt, and non-reinforced concrete. Machine has 1½ yd hopper capacity, can process 10 tons of material per hr, and features replaceable carbide bits, hardened breaker, cleaner and cheek plates. features

Newstripe, Inc.    Aurora, CO 80011
May 21, 2009 Accommodating up to 3 aerosol cans, AEROVENT 3 punctures and drains them in less than 10 sec. It has non-sparking design that includes cobalt piercing tips and anti-static grounding cable. Unit totally encloses cans being punctured, ensuring operator safety, while vent filter eliminates VOC and hydrocarbons from being released into atmosphere and being inhaled by operator. After being processed in unit, cans can be recycled as scrap steel or discarded as regular trash.

General Kinematics Corp.    Crystal Lake, IL 60014
May 14, 2009 Designed for recyclers processing 150 yd/hr and less, portable CD-Express(TM) features Para-Mount II® 2-mass vibratory feeder for system loading and presentation to sorting system. GK Finger-Screen removes fines for Alternate Daily Cover or other applications. Utilizing roll-off containers or hoppers for contained material separation, system can be set up in one day, and with addition of De-Stoner Air classifier, recyclers can divert up to 90% of recyclable material.

Rubbermaid Commercial Products LLC    Winchester, VA 22601
May 11, 2009 Combining 2 removable 23-gal Slim Jim® containers in one Glutton® system, Two Stream Glutton® Recycling Station provides sortation and containment for up to 2 waste streams, with total capacity of 46 gal. System offers choice of slot, square, and circle sortation openings, optional color-coded symbols, and word labels for visual cues, making separation and recycling manageable. It is suited for education, office/property management, and Federal/State/Local Government facilities.

Air Products & Chemicals, Inc.    Allentown, PA 18195
Mar 20, 2009 With Mark II recovery system, XeCovery On-Site Service can address simultaneous recovery of xenon from multiple process reactors. Mark II can process volumes of xenon in excess of 100,000 liters/year at customer site using single equipment package. It is equipped with stream selection logic that enables Air Products to acquire xenon only from processes that employ xenon. To address needs of users of higher concentrations of xenon, Mark III system can be used.