Material Handling

Chemical Processing & Waste Management, Waste Handling Equipment

SP Industries introduces CP-2102 Compactor with forward sloping design to retain fluid in container.

October 3, 2016

Able to handle institutional waste, packaging products, and corrugated materials, CP-2102 comes with two dual 5” cylinders. Minimizing costs and employee labor, compactor includes an optional wet pack feature that reduces foul-smelling discharge. Presenting a security chute system, unit meets or exceeds ANSI and OSHA specifications for safety. Along with large, clear top opening of 42” x 57.5”, and a 40 Gallon Oil Reservoir, CP-2102 runs on 10 HP motor with Tri-Volt 3 PH. Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Self-Contained Compactors suit limited space applications.

July 15, 2015

Designed as integral compactor, power unit, and container, SCM Series provides safe and sanitary handling of general waste. Single-cylinder commercial units come in 10 frame sizes with capacities from 7–23 yd³. When full, entire unit is loaded on roll-off hoist truck for transport to disposal site. Units come standard with 5 ft wide rectangular container for space savings, but 6, 7, and 8 ft models are also available. All offer 28 x 46.5 in. clear top opening and max packing force of 26,400 lb. Read More

Electronic Components & Devices, Mechanical Components & Assemblies, Waste Handling Equipment

Microsemi and Sibridge Technologies Collaborate to Develop Portfolio of High-speed Protocol IPs for SmartFusion2 and IGLOO2 FPGAs

June 5, 2015

Microsemi Selects Sibridge Technologies as CompanionCore Provider ALISO VIEJO, Calif. and SANTA CLARA, Calif. – Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and Sibridge Technologies, a leading provider of design and verification IPs, with expertise in ASIC/SoC design, verification and... Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Nonferrous Separator produces premium, high-grade zorba.

June 4, 2015

Combining 3 eddy current separators, Rougher/Cleaner/Scavenger System is positioned downstream of ferrous separation and trommel screen to size material. Rougher aggressively maximizes recovery of nonferrous metals, while Scavenger recovers any zorba misplaced by Rougher. Cleaner then removes unwanted material from final zorba product. Downstream of RCS system, sensor sorting equipment may be used to separate stainless and lead. Read More

Chemical Processing & Waste Management, Laboratory and Research Supplies & Equipment, Material Handling & Storage, Waste Handling Equipment

DE-STA-CO to Demonstrate Innovative CRL Waste Handling Products at WM Symposia

April 22, 2015

Attendees can try glovebox systems, telemanipulator and RTP Red  Wing,  Minn.  –  Nuclear  waste  professionals can  try  out  and  provide  feedback  on  some  of  the  latest  Central Research  Laboratories  (CRL)  remote  handling  products  from  DESTA-CO  at  the  upcoming  WM  Symposia  WM2015  Conference  at the Phoenix Convention Center in Phoenix. DE... Read More

Chemical Processing & Waste Management, Machinery & Machining Tools, Waste Handling Equipment

Heavy-Duty Compactor handles metal chip and turnings.

February 23, 2015

Featuring dual-cylinder design, CP-2202-CHIP produces 85,000 lb of force to create 4:1 compaction ratio on scrap mild steel turnings, reducing volume of 4 full 40 yd³ containers into one. System can efficiently reclaim cutting fluids, coolants, and oils from turnings and chip materials. Fluid collection system removes fluid from both compaction chamber and compaction container and pumps it to single, sealed collection tank where it is then pumped into customer’s recycling system or holding tank. Read More

Material Handling & Storage, Robotics, Waste Handling Equipment, Green & Clean

Dutch Recycler Further Invests in Robotic Sorting

December 12, 2014

HELSINKI – ZenRobotics Ltd and Baetsen announce continuation of their fruitful cooperation. Baetsen confirms the order for two Next Generation ZenRobotics Recycler (ZRR1) units. The renewed system will replace the earlier ZRR Fast Picker unit that has been in operation at the Baetsen recycling plant since March 2013. In addition, a second ZRR1 unit will be installed to further increase the... Read More

Material Handling & Storage, Waste Handling Equipment

Automatic Handling System safely empties dumpsters.

June 30, 2014

Using simple bump mechanism to release self-tipping skip into waste container, Actiskip helps eliminate back strain. System is suited for situations where there are many bins in use and could lead to injury. Typical applications include industrial businesses, warehouses, government offices and depots, service stations, fast food restaurants, schools, and TAFEs. Read More

Material Handling & Storage, Waste Handling Equipment

DIP Systeme® by SIDE Industrie: No Wet Well. Simple Solution. Our Future

April 16, 2014

S.I.D.E. Industrie is a French family company specialized for over 25 years in solutions for the pumping of "difficult fluids". Based on practical expertise in the field, the development of our product range is the result of 30 years of research, and from listening to the daily concerns of users and designers, enabling us today to offer innovative solutions which are both simple and complete.... Read More

Machinery & Machining Tools, Waste Handling Equipment

Sweed Scrap Chopper Model 450 DDX Release

April 8, 2014

Gold Hill, OR – Scrap choppers are an ideal way for companies to easily reduce their waste and disposal fees while adding re-sale value to their scrap.  The Sweed® scrap chopper model 450 DDX is the latest release from Sweed engineers in their line of scrap choppers; this unit replaces Sweed’s previous Model 450 WM XHD Dual Drive unit. Features The Model 450 DDX boasts robust power... Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Mobile Liquid Biomass Solution creates sterilized water, fuel.

March 31, 2014

MagneGas™ Mobile Unit converts liquid waste — sewage, sludge, agricultural manures, bio-diesel products — into sterilized water, which can then be used, in some instances, for irrigation and fertilization as well as creating clean-burning, hydrogen-based fuel that is essentially interchangeable with natural gas. Plasma Arc Flow process gasifies liquid wastes, and MagneGas created can be used for metal working, cooking, heating, powering bi-fuel automobiles, and more. Read More

Waste Handling Equipment, Green & Clean

Huskies Going Green: University of Washington Athletic Department Installs GreenDrop Recycling Stations

October 25, 2013

Alaska Airlines Arena, Husky Stadium to promote green initiatives at sporting events SEATTLE – The University of Washington Athletic Department's sustainability program has chosen GreenDrop Recycling Stations to help implement their strategic sustainability plans for waste diversion at Alaska Airlines Arena and the newly renovated Husky Stadium. The Athletic Department's sustainability... Read More

Chemical Processing & Waste Management, Waste Handling Equipment, Green & Clean

All Steinert Plant Installed at Comercial Metals Company in Seguin, Texas

October 21, 2013

WALTON, KY – Steinert US, the leading supplier of separation equipment for the material recovery and recycling industry, has installed an all Steinert plant at Commercial Metals Company (CMC) in Seguin, Texas. In 2013 installation of the Steinert/Metso plant began at CMC Seguin; combining multi metering, stage sizing, magnetic, eddy current, sensor, and shape technology to create the all... Read More

Services, Waste Handling Equipment, Green & Clean

Recycling Uptick at Oregon's Hillsboro Ballpark Attributed to GreenDrop Recycling Stations®

July 23, 2013

HILLSBORO, Ore. – GreenDrop Recycling Stations are an instrumental part of the recycling program at the Hillsboro Ballpark, the home of Hillsboro Hops. The City of Hillsboro Parks & Recreation Department owns and operates the operations at the Gordon Faber Recreation Complex where Hillsboro Ballpark is located. As part of the City's environmental and sustainability programs, they have... Read More

Chemical Processing & Waste Management, Material Handling & Storage, Waste Handling Equipment

Scrap Drum features underflow processing system.

May 24, 2013

Using underflow processing, 84 x 60 in. P-Rex84 Scrap Drum optimizes fluff removal and metals recovery. Unit provides maximum edge-to-edge separation and does not decline in performance with heat rise. Permanent magnet extends to edge of drum, while ferrous material is transferred and flipped from magnetic pole to magnetic pole, allowing high-efficiency separation. Product relies on attractive magnetic force and uses no electricity. Read More

Chemical Processing & Waste Management, HVAC, Waste Handling Equipment

Eriez Wins 2012 Plant Engineering Magazine Product of the Year Bronze Award

April 12, 2013

Erie, PA - Eriez®, world authority in separation technologies, won a coveted 2012 Plant Engineering Magazine Product of the Year Bronze Award in the fluid handling category for the company’s revolutionary SumpDoc™ Fluid Recycling System. The announcement was made on March 18, 2013 at the annual Product of the Year dinner in Chicago. Plant Engineering organizes the Product of the Year... Read More

Material Handling & Storage, Waste Handling Equipment

A Solution for Integrating Sorting of Waste and Recycling

December 10, 2012

The waste and recycling drawer is an interesting option for integrating the sorting of these items in your storage solution. <4444>Offered in two different heights (17" and 26"), this drawer has two containers, one blue and one black, with identification on the side to facilitate the sorting of waste. Moreover, since there is a separator at the back, you can store other objects in the back of... Read More

Waste Handling Equipment

Label Matrix Removal System streamlines label roll preparation.

November 8, 2012

Model FX1000 Matrix Removal System automates waste label matrix removal, slitting, and rewinding to finished rolls. Rugged sytem produces tightly wound, color label rolls ready to be applied manually or by most label dispensers or automated applicators. Unit is compatible with CX1000 Color Label Printer and other digital label production systems. Read More

Material Handling & Storage, Waste Handling Equipment

Flow Production of Waste Collection Vehicles: STROTHMANN Installs RoundTrack in FAUN Welding Center

September 6, 2012

FAUN, a German manufacturer of waste collection vehicles, has reviewed the production processes at its main plant in Osterholz-Scharmbeck (Lower Saxony) and initiated large-scale optimization measures for true material flow through all body manufacturing stations. While the modernization followed the model of the automotive industry, the big steel constructions required a suitable transport... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Waste Handling Equipment

New Capabilities for Self-Cleaning Screen Changer Increase Quality and Throughput in Recycling of Contaminated Plastics

July 3, 2012

Options Now Available for Continuous Screen Changer from ADG Solutions Include Finer-Size Screens for Enhanced Filtration and a Larger Machine for Increased Productivity<4444>FAIRFIELD, CT, U.S.A.: New alternatives available for the Fimic self-cleaning continuous screen changer enable recyclers of plastics to increase product uniformity and cleanliness even when processing highly contaminated... Read More