Aquionics, Inc.    Erlanger, KY 41018
May 03, 2011 ProLine+ UV disinfection system provides chemical free disinfection, fully compliant with USEPA and NSF validation guidelines, for municipal drinking water. Water passed through system is exposed to UV light that destroys microorganisms' reproduction capabilities. In addition to using low-pressure, high-output amalgam lamps to minimize energy consumption, system feature operational ranges tested and proven to deliver up to 4-log reduction of viruses.

Veolia Water Solutions & Technologies    Saint Maurice 94417  France
Apr 05, 2011 Designed to sanitize water at 185°F, PURA Systems provide purified water for flow rates up to 26 gpm. Pre-validated systems include multi-purpose tank, reverse osmosis unit, polishing treatment with continuous electro deionization, and control panel. Start/stop mode saves water, while continuous mode maximizes bacteria count control. With hygienic design and 316L stainless steel construction, systems are fully compliant with GAMP, ISPE, cGMP, and FDA requirements.

Aquionics, Inc.    Erlanger, KY 41018
Mar 30, 2011 PharmaLine PQ UV disinfection system uses USEPA-approved UV lamps to destroy pathogens without chemicals and is validated for use in production of pharmaceutical and healthcare products. UV light destroys reproductive abilities of various microorganisms, viruses, yeasts, molds, and algae as water flows through system. UV dosage display ensures total reduction of microorganisms, while online duty sensor can be checked against optional reference sensor to ensure unit is performing within specification.

Advanced Sterilization Products    Irvine, CA 92618
Mar 23, 2011 Available for new or existing STERRAD® 100NX(TM) Systems, EXPRESS Cycle provides 24 min, low-temperature cycle validated for surface sterilization of da Vinci® 3D endoscopes, rigid telescopes, rechargeable batteries, and other devices. This feature upgrade, which supplements existing 42 min FLEX and 47 min STANDARD options, sterilizes instruments without causing damage. Range of cycles ensures end-users have flexible and long-term sterilization options.

United Conveyor Corp.    Waukegan, IL 60085
Mar 18, 2011 Models 4050/6050 condition ash and other abrasive material with water to suppress dust and facilitate transport to trucks and rail cars. While cleaning chains generate contact against ash material, pin-paddles reduce buildup during each cycle stop. Spray nozzles promote water penetration into bed of material for uniform conditioning and can be independently controlled for precise discharge during start up, mixing, and shut down. Shafts and pins use covers made of UHMW PE to resist buildup.

ThermoEnergy Corporation    Worcester, MA 01606
Mar 16, 2011 Based on CAST® technology platform, Thermo ARP(TM) combines heat and flash vacuum distillation for nitrogen removal. System eliminates chemical pre-treatment and recovers nitrogen in form of fertilizer that can be reused or sold. Thermo ARP is specifically designed for use with agricultural, industrial, and municipal anaerobic digesters where wastewater stream may require simple treatment strategy for ammonia removal.

Sabo Industrial Corp.    Newburgh, NY 12550
Mar 16, 2011 Comprising blend of bentonite clay, pH adjusting items, and polymers, CLEARTREAT® Powders can be custom formulated to address specific requirements. Various ingredients act in sequential fashion to break oil and water emulsions, precipitate heavy metals as hydroxides, and promote flocculation and suspended solids removal. Requiring only one chemical addition to one treatment tank, CLEARTREAT produces dewatered sludge that generally passes TCLP leach test to enable disposal as non-hazardous waste.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Mar 15, 2011 Model DCA-23 monitors chlorine in seawater from 0.0-2.0 ppm. Unit measures pH from 0-14, temperature from 0-100°C, and Total Residual Oxidant of seawater from ±1,500 mV, and converts them into equivalent ppm chlorine value. Minimum detection limit is 0.014 ppm and limit of quantification is 0.044 ppm. With max pressure rating of 50 psig at 60°C, Model DCA-23 is suited for LNG terminals, electric power plants, and municipal water desalination plants.

Veolia Water Solutions & Technologies    Saint Maurice 94417  France
Mar 14, 2011 Featuring skid-mounted package, NEXUS® water distribution systems for purified water and water for injection integrate booster pump, 316L stainless steel pipe work, double tube sheet heat exchanger, and control panel. Hygienic design is compliant with GAMP, ISPE, cGMP, and FDA requirements. Units sanitize water using electrolytically generated ozone with UV ozone destruction, or hot water at 185°F. Conductivity monitoring, temperature control, and loop flow meter are also included.

Raven Industries    Sioux Falls, SD 57117
Mar 11, 2011 Available in polyethylene or flexible polypropylene, Dura-Skrim® Textured K-Series mill rolls or fabricated panels come in single- or double-sided, textured, 36 and 45 mil thicknesses as well as various widths and lengths. Scrim reinforced geomembrane, manufactured utilizing cast extrusion process, has consistent core thickness with uniform asperity heights. GeoGrip(TM) surface technology provides uniform stabilization and increased friction between soil and geosynthetic layers.

AIRE Industrial Products    Meridian, ID 83642
Mar 08, 2011 Forged out of 3 in. wide 6061-T6 grade metal, L Stay Put Bracket(TM) Berm can withstand gusts and will keep grounded. Stays slide under berm, eliminating falling and tripping hazard and enabling OSHA compliance. Design is suitable for tank containment, transformer containment, fuel spill prevention under vehicles, and permanent placement under large oil containing equipment.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Mar 08, 2011 Available in carbon steel or 304 stainless steel construction with one-piece body, DELUMPER® 1065N features 6 5/8 x 11 in. inlet opening and hardened alloy one-piece cutting drum fitted with over 200 tapered teeth. Outboard bearings are protected by shaft seals to keep powders within cutting chamber. Supplied with direct gear drive or belt drive as required, crusher handles compressed products, silver and other agglomerates, minerals, and plastics.

Phoenix Technologies    Bowling Green, OH 43402
Mar 03, 2011 With footprint of 1,000 ft², Recycled Polyethylene Terephthalate System uses virtually no water and only 2.3 million kWh of electricity annually. Small capacity system can produce up to 4 million pounds of rPET annually. LNO(TM) process, relying on extremely small particle size technology, enables efficient decontamination and produces rPET with optimal color and yield, suitable for variety of food and beverage applications and various package types.

Fortrans Inc.    Wendell, NC 27591
Feb 28, 2011 Poli-Cut pH control system lowers pH of process water produced in concrete polishing, grinding, and cutting operations so that water can be safely discharged without polluting environment. Self-contained, automated machine utilizes CO₂ gas that is diffused and injected into wastewater to lower pH to 7.0. Mounted on 5 in. polyurethane swivel casters, product has 200 gal tank with 2 in. bottom drain; 2-speed pump, and is able to treat 1,500-3,000 gph.

GaiaRecycle    Palo Alto, CA 94301
Feb 09, 2011 During 8-11 hr processing cycle, Model G-300CD reduces animal carcass weight and volume by up to 75%, removes odors through 6-step deodorizer process, and produces sterilized compostable output material. System employs patented shredder and blade technology, accelerating organic decomposition process based on drying, sterilizing, and grinding waste. Capacities range from 66 lb to 2 tons/day for small and mid-size users and up to 100+ tons/day for large recycling plants.

Sabo Industrial Corp.    Newburgh, NY 12550
Jan 31, 2011 Suitable for recycling wash water from power washing equipment, Econo Flow Automatic Wastewater Treatment Recycling System separates out and encapsulates suspended oils, emulsified oils, and heavy metals. These encapsulated contaminates produce non-leachable, non-hazardous sludge, which is passed through carbon column to remove VOCs, herbicides, and pesticides. Space saving system has 5 x 8 ft footprint, operates at flow rate of 5 gpm, and requires little maintenance.

Moyno Inc. Unit Of Robbins & Myers, Inc.    Springfield, OH 45501 0960
Jan 28, 2011 Max-Flow Annihilator(TM) custom-engineered headworks debris handling system protects downstream pumps, valves, and process equipment in water treatment plants and their lift stations. Mounted side-by-side in stainless steel retrieval frame in headworks of waste treatment system, 2 or more grinders can be installed in-line, staggered, or offset design to accommodate various channel widths. Frame includes guide rails to permit independent retrieval of each grinder for maintenance.

Sabo Industrial Corp.    Newburgh, NY 12550
Jan 27, 2011 Watewater recycling system and reactants are available for 100 gal manual batch processors to large manual, semi-automatic, and automated systems that need to deal with disposal, treatment, or recycling of wastewater which may contain metals. Reactants have dry formula that, when added to treatment system, enable discharge or recycling of wastewater. Fully automatic process separates suspended oils, emulsified oils, and heavy metals. Sludge produced is non-leachable and non-hazardous.

Precision Filtration Products    Pennsburg, PA 18073
Jan 05, 2011 Varnish removal system removes sludge caused by dissolved and suspended oil degradation products from hydraulic or lubrication systems. It uses electro-physical separation process, which utilizes filter medium with oxidative stability. Use of this medium only removes contaminants that cause varnish without disturbing the fluid's additives.

UltraTech International, Inc.    Mentor, OH 44060
Dec 23, 2010 Designed to help meet Spill Prevention, Control, and Countermeasure Plan requirements, Ultra-Containment Berms capture small and large spills from tanker trucks, military vehicles, and other heavy equipment. Drive in-drive out sidewalls lay down when driven through, then automatically spring back to upright position. Designed with chemical-resistant Copolymer-2000 material, berms come in standard and custom sizes and can be rolled up for storage.