Waste Management & tWaste Handling Equipment

Electronic Components & Devices, Waste Handling Equipment

Ultraviolet LEDs enable clean water and environments.

May 27, 2016

Measuring 6.5 mm wide, UV LEDs can be incorporated into range of products from self-disinfecting water bottles to hospital surface cleaners. Technology provides up to 40 mW at 100 mA continuous current operation in single surface mount package. With wavelength range of 280–290 nm, LEDs can deactivate DNA of bacteria, viruses, and other pathogens, preventing disease. Coupled with hemispherical quartz lens, UV LEDs provide precise beam shape, enabling uniform light distribution over large area. Read More

Test & Measuring Instruments, Waste Handling Equipment

Peracetic Acid Test Strip offers extended range detection.

May 27, 2016

When used in 525 nm eXact® Photometers, eXact® Strip Micro Peracetic Acid test strip can, as enabled by reagent system, detect Peracetic Acid (PAA) at concentrations up to 590 ppm. Peracetic acid is used as anti-microbial agent, which FDA recommends is under 220 ppm for washing meat. Thus this testing solution enables food processing facilities to assess FDA compliance. Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Dimminutor®

May 25, 2016

The Dimminutor provides effective, automatic screening and grinding of wastewater solids in straight through channels and wet wells. This powerful unit reduces plastics, wood, rags and other solids to fine bits, enhancing plant operation and improving the reliability of pumps and other downstream equipment. The Dimminutor employs a smooth, continuously rotating design with high torque.  As... Read More

Materials & Material Processing, Sensors, Monitors & Transducers, Test & Measuring Instruments, Waste Handling Equipment

Visual Test Strip measures direct, undyed Propylene Glycol levels.

May 17, 2016

Designed for optimal usability, WaterWorks™ Propylene Glycol check tests for levels from 20%–60% in water to verify fluids are in good working order to prevent damage to cooling systems. Strip uses dip, read, and match procedure. After being dipped in water for 2 sec, strip can be removed and shaken to remove excess water. Resulting color can be matched to color chart on bottle label after 60 sec. Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Brady SPC Offers Safer Absorbent Alternative to Granulars Containing Silica

May 12, 2016

Polypropylene-based absorbent pads and rolls effectively absorb spills without using silica MILWAUKEE, Wis. — Brady (NYSE:BRC), a global leader in industrial and safety printing systems and solutions, today announces its Brady SPC line of absorbent and spill control products is a safer, more effective alternative to commonly-used granular products that contain silica. With OSHA recently... Read More

Mining, Oil Drilling & Refining, Waste Handling Equipment

FMC Technologies Wins Spotlight on New Technology Award for InLine ElectroCoalescer at OTC

May 5, 2016

HOUSTON - FMC Technologies, Inc. won a Spotlight on New Technology award for its InLine ElectroCoalescer, and was recognized at the 2016 Offshore Technology Conference (OTC) in Houston on Monday, May 2. This prestigious award recognizes and honors innovative technologies in the oil and gas industry that significantly impact offshore exploration and production. "We are proud to receive our... Read More

Waste Handling Equipment, Green & Clean

Onsite Wastewater Treatment System works with no electricity.

May 3, 2016

Designed for residential and commercial applications, EnviroFin™ passive wastewater treatment and dispersal system has no mechanical parts, does not need chemicals, and has no maintenance contracts. Effluent leaves septic tank and enters EnviroFin™ unit which consists of center Fin Distribution Unit and 8 treatment fins filled with randomly oriented green plastic fibers and perforated pipe acting as air duct. Effluent fills FDU until it enters treatment fin through perforations around FDU. Read More

Waste Handling Equipment

Noxilizer and Getinge La Calhène Present the Moduline(TM) BioDecontamination, a Fast cost-effective New Solution for Biodecontaminating Syringe Tubs Using Nitrogen Dioxide, at INTERPHEX New York, 26-28 April 2016

April 29, 2016

Fast tub processing module goes on show on Getinge’s booth #3133 Baltimore, MD and Vendôme, France - Noxilizer, Inc., the company advancing a room temperature, NO2-based sterilization process for bio-pharmaceutical manufacturers, and Getinge-La Calhène, a leader in the isolation technologies segment, launch a breakthrough in Ready-To-Use technology: the Moduline™... Read More

Health, Medical and Dental Supplies & Equipment, Materials & Material Processing, Waste Handling Equipment

Meissner to Exhibit at INTERPHEX New York, April 26 - 28, 2016

April 28, 2016

Meissner will be exhibiting at INTERPHEX New York, in New York City, NY, during the week of April 25, 2016. Meissner will be hosting visitors in booth #2341 from April 26 – 28, at the Jacob Javits Convention Center, during the event. Visitors will be able to participate in in-booth demonstrations of our filtration and One-Touch® single-use systems portfolio innovations. FluoroFlex®, the... Read More

Waste Handling Equipment, Green & Clean

IntelliFlux(TM) Artificial Intelligence-Based Control System from Water Planet Powers Demonstrations to Evaluate Performance and Cost of Treating Produced Water for Use in Agricultural Irrigation

April 26, 2016

BAKERSFIELD, Calif. - IntelliFlux™ artificial intelligence (AI) based software developed by Water Planet, Inc. is being used in a pilot project in Wasco, California to evaluate the performance and economics of treating produced water for agricultural reuse. The project, which is being done with Sweetwater Tech Resources, utilizes Water Planet's IMS-5000 Integrated Produced Water... Read More

Material Handling & Storage, Waste Handling Equipment

Drum Liners feature static dissipative design.

April 21, 2016

Available in 18 x 24 in. and 38 x 58 in. sizes, Velostat&trade; Static Dissipative Drum Liners offer capacities of 5 gallons and 55 gallons, respectively. Products do not hold static charges when grounded and are commonly used as waste container liners. Surface resistivity is less than 1 x 10<sup>11</sup> &Omega; per ANSI/ESD STM11.11. Read More

Material Handling & Storage, Packaging Equipment, Services, Waste Handling Equipment

Interphex: Optimize Your Sorbents for Success With Multisorb

April 14, 2016

Buffalo, New York – Multisorb Technologies will exhibit at Interphex in New York City, April 26-28, 2016, and highlight its ability to help pharmaceutical companies drive their success through the optimal use of sorbent technology. "By increasing efficiencies, pharmaceutical companies can reduce expenses without sacrificing quality," said Chris Gilmor, Commercial Director of... Read More

Electrical Equipment & Systems, Laboratory and Research Supplies & Equipment, Waste Handling Equipment

Collimated Beam Device emits radiation in germicidal range.

April 13, 2016

Consisting of UVinaire&trade; UV-C LED module, controller, and collimating tube, PearlBeam&trade; provides table-top UV delivery system, which can be operated virtually anywhere in lab or even field locations. System is available with single, double, or triple wavelengths ranging from 255&ndash;365 nm. Beam radiates testing area of 7.1 in.² with Petri Dish Factor >0.9, providing homogenous intensity distribution that is key for accurate dosimetry testing. LEDs reach full intensity in less than 10 ns. Read More

Controls & Controllers, Waste Handling Equipment, Green & Clean

Cost-Effective Control of VOC Emissions from Storage Tanks

April 12, 2016

Linde details how cryo-condensation can recapture value while minimizing emissions Murray Hill & New Providence, N.J., U.S. – At NISTM 2016, Senior Engineer Robert P. D’Orazio of Linde LLC will detail how cryo-condensation technology can not only minimize VOC emissions for storage tanks but recapture product and value for terminals, tank farms and chemical plants. His presentation,... Read More

Machinery & Machining Tools, Waste Handling Equipment

Screen Classifying Cutter controls size ranges.

April 12, 2016

Featuring 18 in. overall diameter rotor, Magnum Model 72 utilizes 72 in. long helical array of 72 interconnected 4-sided stars, which hold 288 carbide cutter tips to continuously shear oversize materials against twin, stationary bed knives. With no frontal gaps between cutter tips, material is cut into uniform pieces with minimum imperfections or fines. Perforations of bed screen range from 4.0 to .125 in. in diameter, allowing reduction of materials into particles down to 6 mesh.<br /> Read More

Materials & Material Processing, Waste Handling Equipment

Nucleating Agents and Clarifiers cut molding cycles.

April 11, 2016

Intended for processors of PP and HDPE, +Speed&trade; Additives are effective at minimal use levels. Letdown ratios range from 0.1&ndash;0.5% for 3 grades of nucleating agent and 0.2&ndash;1.0% for fourth grade that serves as nucleating and clarifying agent. All products comply with California Proposition 65 and are FDA approved for food-contact applications. Offered in pails or drums, products come in custom blends with liquid colors, or as one of GlobalPlus&trade; range of liquid additives. Read More

Material Handling & Storage, Waste Handling Equipment

RDD: Multisorb's Innovative Sorbent Solutions Resolve Complex Moisture Issues for Product Stability

April 6, 2016

Buffalo, New York – Multisorb Technologies will exhibit at Respiratory Drug Delivery (RDD) in Phoenix, Arizona, April 17-21, 2016, and showcase its capabilities to help companies assure product reliability through sorbent technology. "The drug suspensions, micronized powders, and mixtures used in drug delivery devices can create complex moisture challenges. Too much moisture causes... Read More

Health, Medical and Dental Supplies & Equipment, Material Handling & Storage, Materials & Material Processing, Packaging Equipment, Services, Waste Handling Equipment

FCE Brazil: Multisorb Introduces Sorbent Technology and Services for Pharmaceutical Companies

April 6, 2016

Buffalo, New York – Multisorb Technologies will exhibit at FCE Brazil in Sao Paulo, May 12-14, 2016, and introduce how it can help companies stabilize their pharmaceutical packaging presentations with sorbent technology. For over 50 years, Multisorb has provided end-to-end solutions to help pharmaceutical manufacturers around the world better protect their products against moisture,... Read More

Material Handling & Storage, Waste Handling Equipment

Attached Lid Containers come in clear option.

April 6, 2016

Injection-molded from industrial-grade polymers, Industrial Attached Lid Containers keep contents highly visible and allow for quick identification of parts and supplies. Attached lids snap securely closed to protect contents from dust or damage, while reinforced steel hinge pins provide years of smooth lid operation. Designed to stack for maximized storage and nest when empty, reusable containers are available in 21 ½ x 15 x 9 in., 21 ½ x 15 x 12 ½ in., and 21 ½ x 15 x 17 in. sizes. Read More

Material Handling & Storage, Waste Handling Equipment

MODRoto Offers Recycling Carts Customized with Extra Safety, Security Features

March 24, 2016

At ISRI Booth #1129, Cart Manufacturer to Showcase Ergonomics, Lockability Madison, IN, USA – The 50P Series recycling carts in the Poly-Trux® line from recycling product manufacturer MODRoto, Madison, IN (MODRoto.com) are offered with a choice of optional safety and security features to help safeguard workers from injuries and help prevent access to... Read More