Keyence Corporation of America    Itasca, IL 60143
May 25, 2012 Featuring 3 mm thick extruded aluminum body with 9 mm wide recessed lens surface, GL-R Series is completely guarded from impact damage. One-line wiring system allows transmitter to be connected in series directly to receiver for power and synchronization purposes. Locking into back channel of housing via 2 screws, pre-assembled, quick fit brackets facilitate installation. Smart features include edge-to-edge detection, built-in muting and blanking, and monitoring software.

Energetiq Technology    Woburn, MA 01801
May 21, 2012 Radiometric calibration light source, EQ-99CAL, covers complete UV to visible spectral range with high brightness and stable output levels across 200-800 nm spectrum. Interval between calibrations is 1,000 hr or one year, and bulb has rated life of 5,000+ hr. Exhibiting strong irradiance in 350 nm range, this Laser-Driven Light Source (LDLS(TM)) features calibration traceable to National Physics Laboratory (NPL).

J.W. Speaker Corporation    Germantown, WI 53022
May 15, 2012 Offering direct replacement for 7 in. headlamps, Model 8700 Evolution delivers 650 effective lumens as low beam and 760 lumens as high beam. Advanced optical design enables headlamp to produce beam pattern that minimizes glare for oncoming traffic while placing even spread of light where drivers need it most. Constructed with heavy-duty die-cast housing and hard-coated polycarbonate lens, lamp provides plug-and-play installation.

MaxLite    West Caldwell, NJ 07006
May 14, 2012 Fully dimmable (down to 10%) 17 W LED lamps, Pancake and Eclipse, come in 100° and 90° beam angles for general lighting applications. Available in standard E26 Edison screw-in and GU24 pin bases, 5 in. dia Eclipse comes in 2.8 in. (GU24) and 3.8 in. (E26) lengths. Pancake, with same diameter, comes in 2.6 in. (GU24) and 3.25 in. (E26) lengths. Both are constructed with solid aluminum body and offered in 3000K, 4100K, and 5000K CCT, with corresponding outputs of 1,000, 1,125, and 1,300 lm.

NEXT Lighting    San Francisco, CA 98033
May 10, 2012 Measuring 4 ft long, NEXTLamp Replacement Lamp provides mercury-free lighting solution that is dimmable, quiet, and flicker-free. Thermal and optical management system enables LEDs to operate at low temperature for extended life and stable color maintenance. With ability to shape light distribution, NEXTLamp is suitable for challenging applications for linear lighting.

Larson Electronics, LLC    Kemp, TX 75143
May 09, 2012 Mounted on vertically and horizontally adjustable telescoping pole made of non-sparking aluminum, EPL-PLM-1x150LED-50 has 16 in. dia LED light head that produces 10,000 lm in wide flood pattern capable of illuminating work areas up to 8,000 ft². LED light head, also constructed of non-sparking aluminum, has LEXAN lens and offers 60,000 hr LED lamp life. Approved for Class 1 Division 1 and 2 as well as Class 2 Division 1 and 2 locations, light can mount to walls and other flat surfaces.

Phoseon Technology    Hillsboro, OR 97124
May 07, 2012 Designed for coating and digital ink jet markets, FireJet(TM) FJ200 series offers emitting windows from 75 x 20 mm to 375 x 20 mm and continuous irradiance up to 8 W/cm². UV LED lamp scales via daisy chaining, and optics ensure consistent uniformity at substrate surface. Fully self-contained unit does not requiring external control boxes and can be controlled via RS485 or PLC signals to provide instant on-off and intensity control from 10-100%.

LEDtronics, Inc.    Torrance, CA 90505
May 04, 2012 Consuming 0.8 W at 12 Vac and 1.4 W at 12 Vdc, LEDG4BP-2W Series offers direct replacement for 12 V xenon and halogen T3/T4 subminiature glass bulbs from 4-15 W. Subminiature T5 tube-style lamps come with dual-pin G4 base and are available in 3,000 K warm white or 5,500 K pure white light colors. Typical applications include pendant lamps, under-cabinet lighting, landscape lighting, electric signs, and puck downlights.

Phoseon Technology    Hillsboro, OR 97124
Apr 30, 2012 Designed to match most inkjet print head dimensions, FireEdge(TM) FE200 provides irradiance of 2 W/cm². Lamp features single connector for data and power, daisy chain capability, variable intensity from 10-100%, and instant on/off. Top air intake and exhaust eliminate inkjet print head interference. Reducing angular spread of UV light with no loss of power, optional angle reduction technology minimizes risk of reflected light curing ink in nozzles.

MaxLite    West Caldwell, NJ 07006
Apr 24, 2012 At 5 in. dia x 3 in. long, Pancake PAR40 LED Lamp has 160° beam angle and is suited for general lighting. Eclipse PAR40 LED Lamp, at 5.25 in. dia x 4.75 in. long, has 45° beam angle and is suited for spot lighting. Constructed with solid aluminum body, lamps produce 1,000 lm and are available with E26 Edison screw-in or GU24 pin bases and 3000K, 4000K, and 5000K color temperatures. Component Isolation Technology features driver in isolated, ventilated, heat-sinked center section of bulb.

Lighting Services Inc    Stony Point, NY 10980
Apr 11, 2012 Based on Remote Corrected Cold Phosphor Technology by Xicato, LumeLEX® 2030 Series LED spotlight has discreetly hidden driver, produces consistent quality white light, and maintained color control within 2 MacAdam ellipses. Fixture can be specified with CRI of 97+ or 80+ as well as color temperatures of 2700K or 3000K. To ensure fixture remains focused, series features locking stem for horizontal and vertical planes as well as snap-out accessory cartridge with integral cross baffle.

Photonic Products, Ltd.    Huntington Beach, CA 92647
Apr 03, 2012 Featuring modular form factor, COBRA(TM) Max produces uniform line up to 5,000,000 lux and employs field-adjustable optics that let operators select optimum lens position to meet application needs. This machine vision lighting solution, offered in any length up to 5 m, is available with various power levels as well as wavelengths from ultraviolet (UV) to visible (Vis) and infrared (IR).

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Apr 02, 2012 SG4-Finger safety light curtains feature maximum operating distance of 6 m, controlled heights ranging from 150-1,800 mm, and 14 mm resolution. Along with selectable EDM and manual/automatic restart, devices feature compact 32 x 37 mm profile and are designed for simple installation with rotating fixing brackets. Configuration requires no external control units or supplementary cables.

Besa Lighting Co., Inc.    Blacklick, OH 43004
Mar 26, 2012 Using 6 W total power, 120 V LED Pendants offer full 360° illumination for optimal appearance and downlighting. Design focuses on GU-24 based LED lamp and is engineered to properly manage heat at source, maximizing 30,000 hr LED life potential. Facilitating lightsource replacement, LED lamp features integrated driver. Cable, stem, and cord pendants, offered with range of Besa pendant families, each includes various handcrafted glass decors.

Phoseon Technology    Hillsboro, OR 97124
Mar 20, 2012 Based on SLM(TM) Semiconductor Light Matrix technology, FirePower(TM) Lamps deliver total UV power up to 960 W and pure UV output of 380-420 nm. Water-cooled units offer advanced capability for new applications in flexographic and wide-format digital printing while also allowing system builders to optimize speed in other applications. Available in 3 curing options of 150 x 20, 225 x 20 and 300 x 20 mm, RoHS-compliant lamps are mercury and ozone free.

Dialight Corp.    Farmingdale, NJ 07727
Feb 16, 2012 Designed for both indoor and outdoor industrial lighting applications, 17,000-lumen, 170 W DuroSite® LED High Bay luminaire provides instant-on capability that allows units to be paired with an occupancy sensor and/or dimmable components. Units operate on an integrated universal power supply at 100-277 Vac, and are designed for change out from HID light sources, such as metal halide and high pressure sodium. Product is IP66 certified for use in outdoor and washdown locations.

Vista System    Sarasota, FL 34234
Feb 14, 2012 Offering low-voltage alternative to illuminating Vista Light products, LED illumination kit consists of adhesive LED band and power supply. Plug-and-play kit afixes to sign structure along aluminum profiles and end caps, and only adaptation required by end-user is that of plug adaptor when default electricity plug does not match local outlets.

LEDtronics, Inc.    Torrance, CA 90505
Feb 13, 2012 Drawing 0.8-0.91 W, BF3126 and BF3127 Series are comprised of miniature, solid-state, sunlight-visible, bayonet-base, 6- or 7-LED cluster lamps that provide pure wavelength light for uniform illumination. Both field-replaceable series, with 120° viewing angle, are socket and circuit compatible. Colors include Super Blue (470 nm), Aqua Green (525 nm), Lime Green (570 nm), Super Yellow (595 nm), Super Orange (612 nm), Ultra Red (660 nm), Cool White (8000K), and Warm White (3000K).

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 09, 2012 Featuring compact 32 x 37 mm profile, selectable EDM, and manual/automatic restart, SG4-Hand series is comprised of Type 4 hand safety light curtains that offer max operating distance of 19 m, controlled heights from 150-1,800 mm, and 30 mm resolution. Design facilitates installation with rotating fixing brackets, and configuration accomplished without external control units or supplementary cables.

Lumex Inc.    Palatine, IL 60067
Feb 01, 2012 Eliminating need for AC-to-DC power conversion, QuasarBrite 120 Vac LED comes in round configuration with 7 mm diameter, and can be customized with wire lengths from 6 in. to 6 ft. RoHS-compliant unit is available in blue, white, red, yellow, and green. Typical applications include green energy technology such as monitors on solar panels; industrial control, such as flow meters; commercial appliances; and communications equipment, including network routers and video servers.