Blue Giant Equipment Corp.    Brampton, ON L6W 3K2  Canada
May 14, 2012 With 32,000 lb restraining force, StrongArm(TM) HVR303 secures trailers to loading dock via electromechanical rotating hook to prevent dangers associated with unscheduled truck departure. Features include intelligent touch controls, hook-style arm that can service variety of trailers, and spring-based compensation float that ensures compatibility with air-ride suspension systems. Also, constant-force restraining grip prevents accidental separation due to cross-docking bounce/vibration.

Doosan Infracore American Corporation    Suwanee, GA 30024
May 14, 2012 Powered by 6-cylinder interim Tier 4 compliant diesel engine with gross power output of 365 hp, Model DA30 delivers 1,381 lb-ft gross torque at 1,300 rpm. Transmission offers 8 forward and 4 reverse speeds. Agile undercarriage, designed to ensure that all 6 wheels are in permanent contact with ground, means truck can operate on very rough and soft terrain. Articulation hinge is positioned behind turning ring to provide equal weight distribution to front wheels, even during maximum turning.

Spartan Motors, Inc.    Charlotte, MI 48813
May 01, 2012 Equipped with 138 ft telescopic and articulated aerial platform that supplies up, over, and down range of motion with 80 ft horizontal reach and below grade capabilities to 23 ft, Spartan Telstar can navigate over parapets for roof rescues, clear power lines, and provide below grade rescues. System offers capacity of 1,000 lb, or 500 lb with water flow of 1,000 gpm. In addition to redundant electrical/electronic control systems, platform has sonar system that senses proximity to obstructions.

Crown Equipment Corp.    New Bremen, OH 45869
Apr 10, 2012 Suited for demanding warehouse applications, Crown WP 3000 Series features brushless AC motor technology for responsive acceleration, smooth direction changes, and consistent performance throughout battery discharge cycle. e-GEN braking system utilizes full-motor braking and returns energy to battery for efficiency gains. Featuring ergonomic design, X10® Control Handle has raise/lower buttons that are ideally positioned for blending lift/lower and traction regardless of travel direction.

Navistar International Corp.    Indianapolis, IN 46219
Apr 02, 2012 Available with 10, 11, or 13 L MaxxForce diesel engine, International® LoadStar(TM) is intended for waste, concrete pumping, and airplane refueling. Truck features MaxxForce CleanBurn(TM) Emissions Technology, variable depth frame rails for vocational usage, and Diamond Logic® system, which enables communication between vehicle components and body equipment. For driver comfort, truck has tilt/telescoping steering column, 10 in. fore/aft and 6.5 in. up/down seat travel, and 18 in. first step height.

Mitsubishi Caterpillar Forklift America, Inc.    Houston, TX 77043
Mar 13, 2012 Reaching max speed of 9.3 mph, Jungheinrich® ECR 327/336 Series is suited for order picking, long distance transporting, and loading/unloading trailers. Electric units feature regenerative braking system that provides seamless transition from one direction to another while maintaining load stability. Proprietary Jungheinrich-built motor and controller enable optimal gradeability on inclines. For durability, ECR series features cast steel frame and sealed electrical components.

Skycasters    Akron, OH 44306
Feb 15, 2012 Towable with medium-sized vehicle, 1.8 m mobile satellite communications trailer can be brought to remote locations to establish link for construction sites, mining camps, or emergency response. Satellite Internet system can be custom built and accommodates large satellite dish and up to 3,000 W Honda generator. Features include one 15 dbi WiFi antenna, rear utility box, and 82 in. wide trailer deck. Application examples include WiFi, RoIP, VoIP, wireless mesh, PTMP, and SCADA.

Komatsu America Corp.    Rolling Meadows, IL 60008
Dec 27, 2011 Powered by 469 hp SAA6D140E-6 engine certified to EPA Tier 4 Interim and EU Stage 3B requirements, HM400-3 has max gross vehicle weight of 162,569 lb and hauls up to 44.1 ton payload at max ground speed of 34.7 mph. KOMTRAX® technology wirelessly sends machine operating information to secure website for analysis. Other features include automatic traction control; 6-speed, fully automatic transmission; 10 ft 5 in. loading height; and 70° dump angle.

Jungheinrich Lift Truck Corp.    Houston, TX 77043
Nov 16, 2011 With max lift heights to 35 ft and rated capacities over 27 ft, Jungheinrich® ETV/ETM 214/216 series accommodate both narrow aisle and high-rack applications that require confined work area maneuverability. Operator remains seated while driving truck to promote comfort, and Curve Control feature provides automatic speed reduction during cornering. Featuring 4th generation AC technology for drive, lift, and steering motors, truck can operate for up to 2 shifts on one battery charge.

Doosan Infracore American Corporation    Suwanee, GA 30024
Nov 01, 2011 Powered by 6-cylinder interim Tier 4 compliant diesel engine with gross power output of 500 hp at 2,100 rpm, Model DA40 delivers gross torque of 1,750 ft-lb at 1,300 rpm. Transmission offers 8 forward and 4 reverse speeds, optimizing power from engine to wheels for maximum traction. Featuring hydro-gas front suspension and 6-wheel drive for equal power distribution, truck has top speed of 36 mph, body capacity of 31.9 yd³, and 40 metric ton payload without tailgate.

Toyota Material Handling U.S.A., Inc.    Irvine, CA 92623-7419
Sep 13, 2011 Available in 4,000 and 5,000 lb capacities, 8-Series 4-Wheel AC Electric Lift Trucks with compact 27 in. battery compartment support jobs with narrow 12 ft aisles and tight turning radius requirements. Short design, accommodating 36 or 48 V battery, features power keep function, which compensates for battery depletion and corresponding loss of performance. Regenerative braking continually recovers energy, while System of Active Stability(TM) minimizes likelihood of lateral and longitudinal tipovers.

Balqon Corporation    Harbor City, CA 90710
Aug 05, 2011 Producing zero emissions, all-electric Mule M100 can reach top speed of 70 mph and travel up to 100 miles before having to recharge. This Class 7 on-road vehicle, suited for daily deliveries and inner-city cargo transportation, utilizes proprietary heavy-duty electric vehicle drive system with complete power management, propulsion, and power conversion systems. Equipped with 24 ft deck, truck can carry up to 4 tons and fully recharges in 3 hr.

Balqon Corporation    Harbor City, CA 90710
May 10, 2011 Nautilus XR E20 All Electric Terminal Tractor enables users to perform 2 shift operations for total operating time of 16 hr and up to 150 miles before having to recharge. Electric drive system encompasses complete power management, propulsion, and power conversation systems including drive trains and energy systems. Vehicle fully recharges in less than 2½ hr, allowing for charging during breaks and shift changes.

Johnson Controls, Inc.    Milwaukee, WI 53201
Apr 01, 2011 Designed for pickup trucks, Slim Stow Seat deploys and stows using one-hand operation. Seat stows behind truck's rear panel wall, maximizing cargo space while providing clean appearance. Featuring tubular frame design, upper part of seat panel includes child seat attachment points and defined side-bolsters, while lower part features stable arm. By pushing seatback rearward, kinematics shift it downward by approximately 3.9 in. to maximize visibility and safety.

Caterpillar, Inc.    Peoria, IL 61629
Mar 24, 2011 Available in truck or day-cab configurations, Cat® CT660 can be built with body types such as dump, refuse, hauler, and mixer. Class 8 vocational trucks, powered by Cat CT Series diesel, 4-cycle, inline 6-cyclinder engines, feature aluminum alloy cab construction and aerodynamic sloped hood. Chassis features set-back axle, with 116 and 122 in. bumper to back of cab lengths available. Features also include automatic transmission, Product Link, and one- or 2-piece wraparound windshield.

Rand McNally & Company    Skokie, IL 60076
Mar 16, 2011 IntelliRoute® TND(TM) 510, featuring 5 in. screen, and HD IntelliRoute® TND(TM) 710 with 7 in. screen, both include virtual dashboard with metrics such as odometer, speed, and altitude. Devices help find destinations via latitude and longitude as well as by ZIP code, and they also alert drivers to curves, time zone changes, upcoming construction, border crossing, and speed limit changes. Drivers can choose from Detail View, Highway View, Trip Summary, and Summary Map View to review planned route.

Crown Equipment Corp.    New Bremen, OH 45869
Feb 09, 2011 Equipped with forks that travel upward at 153 fpm, Crown RM 6000 Series can reach 505 in. and deliver up to 4,500 lb capacity at height. Pantograph reach truck, suited for high-density warehouses and distribution centers, is built for visibility at height, eye, and ground levels with offset MonoLift(TM) mast, reach carriage with large window, and load backrest with notch in upper right hand corner. AC motors, regenerative brakes and lowering system, and electronic steering are standard.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Oct 14, 2010 Models 600S, 800S, and 800A engine-powered boom lifts feature steel hoods that offer protection from damaging elements and maintain color over time, increasing durability and minimizing maintenance. Hoods are also available in factory-approved retrofit kits for boom lifts built prior to October 4, 2010 that consist of complete steel hood assembly package, including mounting weldments and hardware.

The MagneGrip Group    Cincinnati, OH 45242
Sep 23, 2010 Designed to attach to apparatus tailpipe, Flexhose System provides 100% exhaust removal with no hose loops. Fully automatic system requires just 16-24 in. aisles between vehicles. Connecting hose automatically retracts away from door when apparatus exits, while support cable inside hose eliminates stretching or stress and ensures smooth nozzle disconnect with every exit.

Pulltarps Mfg.    El Cajon, CA 92020
Jun 10, 2010 Designed for tarping roll-off and hook lift applications, telescoping tower systems include automatic electric arm system, electric pull-out system without arms, or manual pull-out Pulltarp® system. Universal design features 12 V hydraulic system independent of hydraulics on truck chassis as well as DPDT switch to energize power pack and raise tower simultaneously. Double-acting hydraulic ram raises tower from 72-120 in. and tarp housing is 102 in. wide.