u-blox AG
Schweiz   Switzerland
Apr 07, 2008 Capable of (compensated) time pulse accuracy of up to 15 ns, LEA-5T offers Time Mode function whereby GPS receiver assumes stationary position that can be programmed manually or determined by initial self-survey. Stationary operation enables GPS timing with only one visible satellite and eliminates timing errors. Along with SuperSense KickStart weak signal acquisition technologies, module incorporates time mark and counter unit for globally synchronized time stamping/measuring.

Acroprint Time Recorder Co.
Raleigh, NC 27616
Feb 21, 2008 Made from 30% post-consumer recycled content, Green Guard Time Cards feature built-in antimicrobial technology. They can be used with Acroprint side print time recorders and time clocks, as well as any standard side printing employee time clock. Available in packs of 200 and 400, cards come in both single-sided and double-sided options.

Firstsight Vision Ltd
Surrey GU10 1DW  United Kingdom
Sep 11, 2007 With 8 inputs and 8 outputs, Model CC320 allows accurate timing control for events in production line machine vision systems including component sensing, camera triggering, and reject gate control. Unit uses Ethernet connectivity, allows network-centric approach, and permits single or multiple cameras to be triggered at different times. It can be accessed via built-in web server, string commands from any application program using TCP/IP or UDP, or front panel controls.

Spectracom Corp.
Rochester, NY 14623
Jun 12, 2007 With ability to synchronize accurate timing sources such as GPS, IRIG time code, and one pulse-per-second, Series 9300 NetClock® precision time server meets DoD mandates including use of encrypted GPS, support for IPv6, and shock and vibration resistance. Network-centric timing appliance can operate as Automated Computer Time Service server and synchronize devices via dial-up modem, IRIG time codes, one pulse-per-second, and precise 10 MHz frequency output.

Pyramid Technologies, LLC
Meriden, CT 06450
Jun 26, 2006 Integrating 58th Minute Correction Generator with Model 7000 Master Controller or Time and Attendance System, Dual Technology Master Controller provides correction signals for older technology clocks as well as analog and digital clocks. It includes automatic daylight savings time adjustment, battery backup, and programmable bell schedules. System uses low voltage raceway wiring versus 110 Vac conduit and enables new clocks to be plugged into existing circuits.

Exar Corp.
Fremont, CA 94538
Oct 25, 2005 Designed for use with SDRAM modules, clock driver Models XRK32510 and XRK39910 accurately align feedback output to clock input signal ensuring zero delay through IC. Each device distributes 1 clock input to bank of 10 outputs, resulting in low-skew, low-jitter copies of each clock. Model XRK39910 offers 8 zero delay outputs with less than 250 ps of output-to-output skew, selectable positive or negative edge synchronization, and jitter of less than 200 ps peak-to peak.

Lathem Time Corporation
Atlanta, GA 30336 2801
Aug 12, 2005 Installed on any computer across LAN, stand-alone TouchStationâ„¢ uses fingerprint technology to identify employees clocking in and out. Touch sensor stores up to 50 individual fingerprints, and included PayClock EZ software automatically calculates worked hours, tracks sick and vacation time, and provides 22 standard time and labor reports. Unit can export hours directly to payroll providers and offers seamless integration with QuickBooks products.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Jul 07, 2005 Model CDCM7005 synchronizes VCXO frequency up to 2.2 GHz (LVPECL) to 1 of 2 reference clocks to deliver high-frequency, clean clock outputs. It offers phase noise of -219 dBc/Hz, phase jitter of 162 fs (LVPECL) and 232 fs (LVCMOS), and max output skew of 20 ps. Serial peripheral interface logic facilitates programming and individual support control. Unit provides stable frequencies for signal-chain devices such as ADCs, DACs, digital upconverters, and digital downconverters.

Geotest - Marvin Test Systems, Inc.
Irvine, CA 92614-5846
Apr 14, 2005 With 14 pre-defined measurement functions, GC22x0 Series features internal clock source, programmable ARM source, and microprocessor. Model GC2210 measures frequencies from DC to 225 MHz with 9-digit resolution, while GC2220 measures from DC to 1.3 GHz with 100 pS resolution. Each input channel is programmable for 1 Megohm or 50 ohm input impedance. Able to determine any frequency to 0.1 ppm in 1 ms, GC2230 covers frequencies up to 2.0 GHz.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Mar 25, 2005 Model E5850A gives designers ability to capture real-time oscilloscope signals with up to 13 GHz bandwidth, correlate them to key digital signals on Windows® XP-based logic analyzer, and view them all on one screen. Design engineers can move between logic analyzer and scope as they pinpoint problems through continuous tracking of timing markers between instruments. Seamless integration minimizes time to debug complex digital embedded systems.

Pericom Semiconductor Corp.
San Jose, CA 95131
Aug 30, 2004 Registered Buffers PI74SSTU32864A/SSTU32866 and Phase-Locked Loop Clock Driver PI6CU877 are optimized to drive DDR2-400 and DDR2-533 Memory Modules. Model PI74SSTU32866 includes parity logic function that provides security feature of detecting data error. Registered buffers feature 25-bit 1:1 or 14-bit 1:2 configurable buffer, 270 MHz clock frequency, and 2.15 ns max speed. Clock driver features 270 MHz frequency, 40 ps skew, and 140 ps jitter.

Spectracom Corp.
Rochester, NY 14623
May 28, 2004 TTS Series NTP Network Time Servers offer time synchronization for building, network, and operational security. They also enable end-users to establish and maintain synchronization securely behind firewall protection. Servers use precise GPS by tracking up to 12 satellites simultaneously to provide consistent and accurate time reference. Products are suited for synchronized time recording for video surveillance systems.

Connor-Winfield Corp., The
Aurora, IL 60505
Jan 28, 2003 Model MSTM-S3-IT3 acts as complete system clock module for Stratum 3 timing applications in accordance with GR-1244, Issue 2 and GR-253, Issue 3. It is suitable for remote or external locations where environment is not controlled. Operating temperature range is -40 to +85°C. Five volt, miniature module provides 40 second, filtered hold over history; operational status flags; and redundant 8 kHz references. It is useful for SONET, TDM, SDH, and PDH applications.