Agilent Technologies, Inc.    Santa Clara, CA 95051
Jan 30, 2012 Agilent N4880A provides multiplying PLL that lets R/D and test engineers lock pattern generator clock of J-BERT N4903B and ParBERT 81250A to reference clocks from system under test. Reference clock rates from 19-100 MHz support receiver test applications such as PCIe® 1.x, 2.x, and 3.0 main boards; MIPI M-PHY devices; and UHS-II host devices. Simplified receiver test setup helps R/D and test teams accurately characterize and verify standard compliance under reproducible test conditions.

Symmetricom Inc.    San Jose, CA 95131
Jan 20, 2012 As carrier-grade IEEE 1588-2008 Grandmaster Clock, TimeProvider® 5000 handles frequency and phase requirements of Next Gen networks. Carrier-grade Network Time Protocol (NTP), Synchronous Ethernet (SyncE), and T1/E1 support supplement Precision Time Protocol (PTP) synchronization platform, ensuring service providers have necessary timing protocols for 4G/LTE services. Solution supports up to 10 expansion shelves with TimeProvider® 5000 Grandmaster and up to 1,000 PTP clients.

Symmetricom Inc.    San Jose, CA 95131
Nov 08, 2011 Suited for 4G/LTE mobile network equipment, SA.32m protects against service disruption that could occur during temporary loss of GPS signal or when network-based sync signal is not available. Product specifically enables base station designs for holdover of ±1.5 µsec for up to 24 hr, enabling networks to remain synchronized even if primary synchronization sources are unavailable. Supplied in 2 x 2 x 0.7 in. package, clock delivers stability to 100 second Allan Variance of 1E-11.

Symmetricom Inc.    San Jose, CA 95131
Nov 08, 2011 Delivering frequency and phase synchronization required by IP-based LTE infrastructure, SoftClock SCi 2000 rel 2.0 handles multiple sync standards - PTP 1588, SyncE, GPS, UTI, and E1/T1 - as well as LTE-TDD requirements of frequency (50 ppb at air interface) and phase (±1.5 µsec). This carrier-grade, embedded, multiple-input software clock, featuring BesTime® time reference management algorithm, lets systems select from multiple sync inputs and provide best possible clock output.

Symmetricom Inc.    San Jose, CA 95131
Sep 30, 2011 Available with 16.384 and 10.24 MHz output options, SA.45s Chip Scale Atomic Clock (CSAC) enables portable applications requiring precise synchronization and time keeping in GPS-denied environments. Product, which is 16 cc in volume, weighs 35 g, and draws 120 mW, brings autonomous, reliable timekeeping to applications with space/power constraints, such as dismounted IED jammers, UAVs, next-gen man-pack radios, military handheld GPS units, and geophysical sensors.

Acumen Data Systems, Inc.    West Springfield, MA 01089
Aug 23, 2011 Designed for employee time and attendance as well as access control, Model GT550 integrates into existing Ethernet networks and supports PoE. Unit enables many forms of employee clocking, including fingerprint biometrics, proximity, barcode, magnetic stripe, and PIN. Clock includes 10 in. color touchscreen, SD socket, and 6 USB 2.0 ports for expansion. With self-service functionality, employees can request time off, view time off approvals, and transfer departments directly from clock.

Connor-Winfield Corp., The    Aurora, IL 60505
Aug 04, 2011 With Stratum 1 time source, 125 Series Xenith TBR (Model FTS500) consists of OCXO-based enclosed GPS disciplined clock and timing device for DVB, DAB, wireless communication infrastructures, time-stamping, or any other critical timing applications. This GPS-driven, mixed-signal PLL provides 1 pps CMOS output and generates 10 MHz SINE output from low-jitter VCXO. Supplied in aluminum housing measuring 106 x 125 x 56 mm, solution is G.811 compliant (GPS locked) and G.812 Holdover compliant.

Canadian Time Systems Inc.    Maple Ridge, BC V2X0T4
Dec 29, 2010 Featuring 50 employee capacity, expandable to 250, Model RTC-1000 provides businesses with multiple time clock support, allowing employees to clock in at any clock on system. Unit calculates total hours, wages, and overtime, as well as non-worked hours such as holiday, vacation, and sick days. Model RTC-1000 also helps in proper arrangement of employees by department and delivers e-mail time clock alerts. Compatible with Windows and Mac, clock includes Ethernet, USB, and serial connections.

Intelligent Instrumentation, Inc.    Tucson, AZ 85706
Dec 06, 2010 Leveraging remote fingerprint verification on central and secure IBM iSeries servers, LANpoint Time Clock with VSSA Biometric Strong User Authentication-enabled TGS/400 system eliminates unauthorized clock-in via use of SecuGen biometric sensors. Centrally managed employee credentials and unlimited user capacity promote applicability, while privacy protection is ensured via secure biometric minutiae technology that never stores fingerprint image and cannot be used to recreate one.

Intersil Corporation    Milpitas, CA 95035
Oct 21, 2010 Equipped with integrated 512 x 8-bit EEPROM configured in 16 bytes/page, Model ISL12029A tracks time with separate registers for hours, minutes, and seconds. Device also has calendar registers for date, month, year, and day of week. Available in SOIC and TSSOP packages, RoHS-compliant unit provides 2 non-volatile alarms, intelligent battery backup switching, on-chip oscillator compensation, and CPU Supervisor functions, including power-on reset, low voltage sense, and watchdog timer.

iEmployee    Austin, TX 78746
Sep 22, 2010 Offering seamless integration to iEmployee Time and Attendance solution, iEmployee TT-68 Time Clock enables organizations to capture time and labor data. Terminal allows labor allocation to be enabled/disabled at clock and includes multiple authentication methods, including biometric, PIN punching, magnetic stripe, barcode badge, and RFID reader. It can also collect department and job information as well as display HR data such as schedules and accrual balances.

Intersil Corporation    Milpitas, CA 95035
Sep 14, 2010 Offered in 20 Ld SOIC module that contains RTC and embedded 32.768 kHz quartz crystal, Model ISL12022MA features 10-bit digital temperature sensor output and 15 selectable frequency outputs. Functions include oscillator temperature compensation, clock/calendar, power fail and low battery monitors, brownout indicator, and one-time, periodic or polled alarms. Calibrated oscillator provides less than ±5 ppm drift over full -40 to +85°C temperature range.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Aug 02, 2010 Available from 2-19 output pairs, IDT series meets all requirements for PCIe Gen3 reference clock phase jitter specification. This enables development of high-throughput systems for server, embedded, and communications markets. Select devices are pin-compatible upgrades to existing IDT PCIe Gen2 timing devices. Selectable SMBus addresses and fanout buffers with integrated 2:1 input mux improve system performance and reduce component board space.

Pericom Technology Inc    San Jose, CA 95134
Jun 25, 2010 Model PT7C4337 clock/calendar features 2 programmable time-of-day alarms and programmable square-wave output. Date at end of month is automatically adjusted for months with fewer than 31 days, including corrections for leap year, and clock operates in either 24 or 12 hr format with AM/PM indicator. Operating from 1.8-5.5 V, unit has oscillator stop flay function and external quartz crystal frequency of 32.768 kHz. Package options include SOIC-8, DIP-8, and MSOP-8.

Pyramid Technologies, Inc.    Meriden, CT 06451
Mar 17, 2010 With Model 2600, companies can track employees' time and attendance with precision. Highlighted recordings provide indisputable payroll data including early/late punch in and overtime information, minimizing incidences of overcompensation and unearned leave. Featuring space saving design, recorder offers dual-color LCD backlit display, 2-color printing, 6-column timecard, and auto alignment with top loading and ejecting, which eliminates misaligned, hard-to-read recorded hours.

Spectracom Corp.    Rochester, NY 14623
Dec 29, 2009 With NetClock® Wireless Clock System, official time from GPS-enabled master clock/time server is broadcast by wireless transmitter using open frequency 900 MHz. Analog and digital clocks receive time signal and rebroadcast it to other clocks for reliable wireless time mesh network without multiple transmitters. Integrating display time with entire network and facility infrastructure, NetClock is suited for servers, routers, building automation, access control, and video surveillance.

Micro Crystal, U.S.    Arlington Heights, IL 60004
Oct 29, 2009 Housed in 5.0 x 3.2 x 1.2 mm SMD package, Model RV-2123-C2 contains 32.768 kHz Tuning Fork crystal, matched with CMOS-based oscillator and real-time-clock circuitry. Device features ultra-wide 1.1-5.5 V operating range and SPI-Bus® for communications with other circuitry. At room temperature, frequency and time keeping is within ±10 ppm or within ±20 ppm at 25°C. RoHS-compliant clock is suited for compact portable devices, especially where super capacitor is used for backup supply operation.

Control Co.    Houston, TX 77258 8307
Oct 02, 2009 Suited for any work area, Traceable® Stick-It(TM) Mini-Clock features easy to read bright hands and white sweeping second hand in O-ring sealed, water-resistant, dustproof, rugged metal case. Supplied Velcro® and double-backed tape allow it to be placed anywhere, while flat bottom permits standing on shelf, desk, or bench. Measuring only 1.6 in. dia x 0.3 in. deep, clock weighs 1 oz and comes with individually serial-numbered Traceable® Certificate. Unit is powered by 2 yr battery.

Intersil Corporation    Milpitas, CA 95035
Sep 02, 2009 With operation from 1.4-3.6 V, Series ISL12057/8/9 is suited for battery-powered portable applications such as remote utility meters, multi-function printers, and digital photo albums. Real-time clock and calendar uses external 32.768 kHz crystal that tracks time by date, year, month, week, and hour, minute, or seconds. Measuring 0.55 mm thick, Models ISL12057 and ISL12058 require 2 x 2 mm board space, while Model ISL12059 comes in industry-standard SOIC package.

Lathem Time Corporation    Atlanta, GA 30336 2801
Jul 15, 2009 Engineered for commercial buildings, Solar Powered Analog Wall Clock utilizes solar panels on front dial to recycle room's ambient light into power. Manually activated light meter indicates if room has sufficient light to operate via solar energy. Depending on light level of room, clock operates completely off solar power or can alternatively be powered by single replaceable lithium battery. Clock maintains accurate time to millisecond by synchronizing to AirTime wireless signal.