Timers & Clocks

Related Categories
Test & Measuring Instruments, Timers & Clocks

Digital Device functions as timer, counter, and tachometer.

March 26, 2009

Series LCT216 features easy to read display that shows both desired set point and current process value, along with operating mode that control is functioning in. Unit also offers 14 pre-programmed timer functions, and counting functions include 1- or 2-stage counting along with batch, total, or dual counting modes. When used as tachometer, device is able to measure rotational speeds. Read More

Timers & Clocks

Master Clock targets critical digital broadcast sites.

March 25, 2009

Housed in 2RU chassis, EC22S Epsilon Clock(TM) features integrated IP management functions, as well as redundant power supplies, redundant GPS receivers, and redundant hot-swappable clock modules. In event of failure of any component, output signals are switched with very low phase glitch to ensure continuity of operations. With GPS signal reference, synchronization solution provides accurate UTC... Read More

Test & Measuring Instruments, Timers & Clocks

Radio Atomic Clock offers 1 sec accuracy for 25,000 yr.

March 6, 2009

Traceable® GIANT-DIGITS(TM) Radio Atomic Clock model 1087 is 16½ x 10½ x 1¾ in. and 3¼ lb and displays date, 12/24 hr format, and day, with 4¾ in. digits viewable from 200 ft. Featuring 2¼ in. digits, model 1088 is 11½ x 7¾ x 1 in. and 1 1/8 lb. Both automatically adjust to daylight savings, leap year, and Earth's wobble in leap seconds. With temperature range from... Read More

Timers & Clocks

Process Timer monitors multiple liquid penetrant stations.

January 28, 2009

Constructed with splash-proof and grease-resistant keypad, battery-powered Multi-Station Process Control Digital Timer lets users simultaneously monitor up to 4 Zyglo liquid penetrant inspection stations on one LCD. There are 4 distinct audible and visual alarms - Penetrant Dwell, Rinse Time, Emulsification Time, and Developer Dwell - which cause corresponding LED to flash and specific number of... Read More

Test & Measuring Instruments, Timers & Clocks

Quartz Hour Meters are waterproof and tamper-resistant.

October 29, 2008

Designed for commercial grade to precision industrial equipment, Electromechanical Quartz Hour Meters include Cramer 638 Series DC meter, which sustains operating voltage range of 10-80 Vdc, and Cramer 637 Series AC Meter, which operates from 90-264 Vac, 50/60 Hz. Both units are 100% sealed and RoHS-compliant and are suited for monitoring in-service and processing time of equipment. Read More

Architectural and Civil Engineering Products, Controls & Controllers, Mechanical Components and Assemblies, Plant Furnishings & Accessories, Timers & Clocks

Dortronics Demonstrates Strength of Product Line at ASIS 2008

October 28, 2008

New Enhancements Made to Comprehensive Product Lineup. Atlanta, GA (September 15, 2008) - Dortronics Systems, Inc. is reaffirming their standing as the industry's leading supplier of standard and custom finish access control products by highlighting several of their product lines at ASIS 2008, including the popular ETR-Timer - Multi Function Fail-Safe Time Delay, EZ-Access Door Control Solution... Read More

Test & Measuring Instruments, Timers & Clocks

Resettable Electro Mechanical Hourmeter

September 10, 2008

September 1, 2008 ENM's series T55 electro-mechanical hour meter is a new design which incorporates the great accuracy found in our other products. The T55 series are available in either reset or non-resettable versions. The meter can be used for indication of machine runtime or time between service for maintenance purposes. The T55 series is durable and can operate over a wide range of... Read More

Communication Systems & Equipment, Sensors Monitors & Transducers, Timers & Clocks, Transportation Industry Products

Brilliant Telecommunications Announces Collaborative Technology Agreement with NovAtel

September 9, 2008

Agreement delivers new choices to customers for the delivery of highly precise and robust GNSS timing products Campbell, Calif. August 7, 2008-Brilliant Telecommunications, Inc. (Brilliant), a developer of next-generation synchronization and timing solutions and NovAtel Inc, (NovAtel), a precise positioning technology company and wholly-owned subsidiary of Hexagon AB (STO: HEXA B) (Hexagon),... Read More

Computer Hardware & Peripherals, Timers & Clocks

PCI-Bus Timing Boards support Sun Solaris v10.

August 22, 2008

Timing boards are available with Solaris 10 software driver package, which allows for integration of precision timing applications into Solaris OS environment. Driver allows for set-up and control of local clock synchronization to references such as GPS or IRIG timecode. It also offers ability to generate time-based interrupts for external events, alarms, and periodic signals. Other features... Read More

Timers & Clocks

Digital Timers offer 7-day on/off operation.

August 19, 2008

Used to help conserve energy as well as promote security and convenience, EI500 Decorator Digital 7-Day Time Switch Series lets users program up to 7-ON/7-OFF operations per week. These operations can be used for 24 hr or 7 day load control of lights, fans, coffee makers, and pumps. Integral display continuously shows time of day, day of week, timer load, and load status. Read More

Computer Hardware & Peripherals, Timers & Clocks

Time Recording System targets SMBs.

July 9, 2008

With touch of CHIPDRIVE user chip token to time recording terminal, CHIPDRIVE® Time Recording Touch and Go enables employees to clock-in, clock-out, and record time spent on specific projects, eliminating need to carry and swipe time cards. Data from user chip tokens is transferred to network-connected Touch and Go terminal via contactless MIFARE® technology. Suitable for up to 25... Read More

Controls & Controllers, Fasteners & Hardware, Timers & Clocks

Electronic Time Delay Device meets NFPA requirements.

April 9, 2008

Providing field adjustable time delay of 1-60 sec, ETR-Timer can also be adjusted at factory to fixed 30 sec delay. Powered from 12-24 Vdc supply requiring 0.05 A, it can be triggered from either NO or NC momentary dry contact or by switching trigger input to power source ground. Unit meets code requirement for true fail-safe lock timer, and protects timing circuit against spikes and surges... Read More

Services, Timers & Clocks

Quantum Logic Clock rivals world's most accurate clock.

March 19, 2008

Built at NIST, aluminum and mercury clocks are based on natural vibrations in ions and would neither gain nor lose 1 sec in over 1 billion years. Quantum logic clock uses aluminum and beryllium ions, confined closely together in electromagnetic trap and slowed by lasers to nearly absolute-zero temperatures. NIST scientists applied quantum computing methods to share information from aluminum ion... Read More

Timers & Clocks

Industrial Pushbutton Timer is adjustable.

March 7, 2008

Available with time range of 1 sec to 79 min, timer box is activated by push button that counts down from user-settable time, while piezo-buzzer and flashing LED alerts users when time has elapsed. It also includes second settable time with relay output to control rinse tanks. Offered in NEMA 4X enclosure, battery-powered unit features digital circuitry, rotary switches, and plug in option, and... Read More

Services, Timers & Clocks

Atomic Clock tops previous records for accuracy.

February 22, 2008

Demonstrated by physicists at JILA, a joint institute of NIST and University of Colorado at Boulder, Atomic Clock is based on thousands of strontium atoms trapped in grids of laser light. It would neither gain nor lose a second in more than 200 million years, compared to NIST F-1's current accuracy of over 80 million years. Because light has higher frequencies than microwaves, clock divides time... Read More

Green & Clean, Timers & Clocks

Time Cards help kill germs.

February 21, 2008

Made from 30% post-consumer recycled content, Green Guard Time Cards feature built-in antimicrobial technology. They can be used with Acroprint side print time recorders and time clocks, as well as any standard side printing employee time clock. Available in packs of 200 and 400, cards come in both single-sided and double-sided options. Read More

Green & Clean, Sensors Monitors & Transducers, Test & Measuring Instruments, Timers & Clocks

P&S Timers and Sensors Offer Automated Energy Savings for Home and Business

January 30, 2008

SYRACUSE, N.Y. (Jan. 14, 2008) - Pass & Seymour/Legrand (P&S), a leading manufacturer of electrical wiring devices and home systems, announces a new line of Sensors and Timers to reduce lighting energy consumption in virtually any type of room. P&S Sensors and Timers ensure that lights go out when they aren't needed, and there's a model for any commercial or residential application. From simple... Read More

Test & Measuring Instruments, Timers & Clocks

Data Collection Device records employee work times.

January 24, 2008

Internet-ready HP WebNet instantly pushes employee time and labor data directly to web-hosted employee time tracking system, Attendance on Demand. Biometric time recorder minimizes incidents of time theft and buddy punching by matching employee with template of their hand. With HP WebNet, users press key to access last punch information, current and previous period hours, summaries by pay... Read More

Computer Hardware & Peripherals, Controls & Controllers, Optics & Photonics, Timers & Clocks

Dortronics Provides Custom Notification Solution for Lake Taylor Hospital.

December 26, 2007

Customized Timer Aids Security Personnel In Monitoring Camera Alerts. Sag Harbor, NY (November 26, 2007)- Lake Taylor Transitional Care Hospital in southeastern Virginia has built their reputation by providing the best care available for their patients and their families. It was only natural, therefore, that they would seek out suppliers who have also made their name by providing the best... Read More

Display & Presentation Equipment, Test & Measuring Instruments, Timers & Clocks

Large Digit Displays can be viewed from up to 160 ft away.

November 9, 2007

Available for analog, pulse, and serial data signals, G04 Series Large Digit Meters, Counters, Timers and Serial Input Displays come with oversize 4.0 in. digits for long distance viewing in any plant or outdoor environment. Number of digits is 5 for analog or rate signals for readings from -19999 to 99999, and up to 7 for totalizing or for use as serial input remote display with readings from... Read More