Vapore, Inc.
Richmond, CA 94801
Jun 08, 2004 Capillary Force Vaporizer combines capillary force and phase transition to generate powerful jet of pressurized vapor from unpressurized liquid, with no moving parts. When used with consumer products such as fragrances or insect repellant, CFV can disperse active ingredients directly, eliminating need for propellants, fillers, and disposable aerosol cans. When used with liquid fuels, vapor produced by CFV burns like natural gas.

Caron Products & Services, Inc.
Marietta, OH 45750 0715
Apr 28, 2004 Polystat temperature control products provide temperature range from -30 to +200°C and are fitted with independent over-temperature protection device and bath-fluid level alarm. When activated, units give visual and audible warnings and shut down to stand-by mode. Controllers allow administrator to lock out functions that are not required or should not be accessed by operator. Available in 3 versions, interchangeable controllers offer plug & play functionality.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)
Tiverton, RI 02878
Mar 26, 2004 Leister Labo Heater can be mounted virtually anywhere and integrated into variety of processes. Measuring 5 x 1 in., unit requires compressed air line or blower and can be supplied with range of nozzles to meet application. Miniature tool is offered in 120 V, 550 W version that produces 1,100°F and 230 W, 800 V version that reaches 1,150°F. It is suited for heat staking or thermal riveting plastics, drying adhesives and inks, and soldering and de-soldering.

Eclipse Combustion
Rockford, IL 61103
Mar 19, 2004 ThermJet PCA nozzle-mix burner accepts preheated air in temperature range of 1,000°F, and delivers precise temperature uniformity in intense stream of hot gas with velocities from 250–750 ft/s. Burner can be operated with any firing methodology, including on/off, pulse, time proportional, modulating, or high/low. Available in 14 sizes up to 20 mm Btu/hr, burner can be fired on natural gas, butane, or propane.

Fenwal
Ashland, MA 01721
Feb 12, 2004 Model 35-73 Intermittent Pilot Gas Ignition Control is microprocessor-based and polarity insensitive. Featuring repeatable timing sequences, it provides TFI times up to 120 sec, single spark and sense and remote flame sense options, thermostat/power off and automatic reset options, and on-board diagnostics with LED output. CSA certified unit is suitable for controlling pilot and main gas valves, monitoring flame, and igniting LP and natural gas buners.

Caron Products & Services, Inc.
Marietta, OH 45750 0715
Dec 22, 2003 Model 2050W provides temperature control from -18 to 90°C. With pumping capabilities to externally circulate, CE-marked, 230 V unit is suited for end-user and OEM applications including electron microscopes, general laboratory apparatus cooling, water-jacketed incubators, rotary evaporators, and laser cooling.

Wayne Combustion Systems
Fort Wayne, IN 46803
Dec 15, 2003 Nighthawk LC1000 fires up to 1.4 million BTU/hr, while Model LC2000 fires up to 2.3 million BTU/hr. Both are available as On-Off, Fully Modulating, or Low-High-Low. Applications include hot water heaters, boilers, process heating, ovens, incinerators, and indirect heating.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Oct 28, 2003 Suited for use with biological and other samples, EchoThermâ„¢ SC20 Digital and SC25 Fully Programmable Dry Baths are Peltier driven. They offer control to 1°C; mix speeds from 200–1,000 rpm; and backlit, 2-line, alphanumeric display. Variable-speed orbital mixer allows for simultaneous mixing and controlling of sample temperatures. Features include 30-day count down timers with alarm and Auto-off, data logger, and RS232 I/O port.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Sep 17, 2003 Model 3370 Liquid-to-Air Recirculator delivers 13,640 BTU cooling capacity at 68°F and can handle liquid temperatures as high as 170°F. Positive displacement pump circulates fluid at up to 1.5 gpm to equipment, back into reservoir, and through fan-cooled radiator, which removes heat. Built-in, low-liquid level indicator safeguards reservoir and circulation system. Pump and cooling system are further protected with reusable filters.

Hart Scientific, Inc.
American Fork, UT 84003 9775
Aug 12, 2003 Constant-temperature, Deep-Well Compact Baths provide 18 in. of depth to accommodate liquid-in-glass thermometers, SPRTs, and other long-stem thermometers. Four baths in series cover temperatures from -80 to +300°C. Stabilities are from ±0.005 to ±0.015°C and uniformities are as good as ±0.007°C. Each bath comes with RS-232 port and Windows-based control software and is compatible with MET/TEMP II software for completely automated calibrations.

Sub-Zero Freezer Co., Inc.
Madison, WI 53744 4130
May 15, 2003 Stainless steel dual fuel range is offered in 16 different size/feature configurations. Electric oven includes 2 convection fans and 4 heating elements for control over 8 cooking modes. All-glass electronic control panel is hidden to create clean, minimalist look. Oven knobs feature digital temperature readout. Burners deliver up to 15,000 BTUs. Dual-stacked design uses upper-level burner for max heat transfer and lower-level burner for simmering on all burners.

Eclipse Combustion
Rockford, IL 61103
May 14, 2003 ThermJet Furnace Burners include 7.5 mm Btu/hr and 10 mm Btu/hr models that produce intense stream of hot gases to thoroughly penetrate load and deliver uniform temperature for consistent product quality. Units are offered for medium- and high-velocity operation, with gas velocities of 250 ft/s and 500 ft/s, respectively. User may specify capacity, velocity, combustor type, fuel type, thread type, and flame sensing components.

Kromschroder Inc.
Hudson, OH 44236
May 02, 2003 Model BICR Burner features modular design for use on either new or refurbished systems. It utilizes high velocity to promote exhaust gas recirulation of flue gases, reducing harmful emissions. Burner operates with direct ignition and on/off control. Three capacities are available from 70,000–280,000 Btu/Hr. Burner includes flame rod, ignition electrode, gas adjusting orifice, and optional UV detector for flame supervision.

Kromschroder Inc.
Hudson, OH 44236
Apr 08, 2003 BIC...L Excess Air Burner provides even temperature distribution in furnace over entire capacity range of burner. It features high flame outlet velocity and excess air capability up to 1600%. Designed for natural gas and LPG, burner comes in sizes from 75–300 kW and can be adapted to various wall thicknesses. It includes silicon carbide firing tube, ignition and ionization electrodes, integral limiting orifice valve and internal gas and air metering orifices.

Brookfield Engineering Laboratories, Inc.
Middleboro, MA 02346
Mar 20, 2003 Baths are equipped with TC Series digital programmable controllers, which provide temperature control during viscosity measurement to help ensure accurate test results and predicting product performance. Controllers, equipped with 3 adjustable, pre-set temperatures, offer full graphic display with help menus, time and temperature programming with data logging, and interface with proprietary Rheocalcâ„¢ or Rheovisionâ„¢ software for computer control.

Lee Industries, Inc.
Philipsburg, PA 16866
Jan 22, 2003 Heavy-duty, double-motion, scraped-surface No. 9M handles gums, gels, pastes, and similar products with viscosities as high as 2,000,000 cps. It includes piggyback motors for independent speeds, inclined shaft, and variety of turbine/crossbar and spacing designs. Units are offered in tanks and kettles for vacuum/pressure and special sanitary applications.

Eclipse, Inc.
Rockford, IL 61103 1299
Nov 15, 2002 Model IP010 ImmersoPak burner has 3 MBtu/hr input. Nozzle-mixing burner comes complete with packaged combustion air blower. Unit is multi-fuel capable and operates with control method of modulating air. It is suitable for heating immersion tubes on cleaning tanks, spray washers, salt baths, quenching tanks, tempering tanks, asphalt tanks, and similar equipment.

Eclipse, Inc.
Rockford, IL 61103 1299
Nov 13, 2002 HeatPak, with integrated valve train and control box, includes double valve with gas pressure switches, Veri-Flame® modulating flame monitor, and ignition transformer. It can be used on burners with ½ to 2 in. piping up to 6 MMBtu/hr inputs. It is available with 2 options: one with choice of scanner or flame rod, and another proof of position using either switches on burner or auxiliary contacts incorporated within Eclipse ACT004 rotary actuator.

Lee Industries, Inc.
Philipsburg, PA 16866
Oct 30, 2002 Kettles and tanks can be custom produced with features found on company's standard equipment. Custom agitation systems can include inclined agitators, vacuum pressure designs with mechanical seals, heavy-duty designs to 2,000,000 CPS, and custom pharmaceutical grade finishes (including electropolish).

Gaumer Process Heaters, Systems & Controls
Houston, TX 77040
Jun 20, 2002 Vaporizer maintains recirculating fluids such as Dowtherm® A, Dowtherm® J, and Therminol® VP-1 at temperatures as high as 750°F. It uses vapor phase of heat-transfer fluids to promote high heat transfer rates and control temperature. Other liquids that can be vaporized include ammonia and liquified gases.