Lee Industries, Inc.
Philipsburg, PA 16866
Jul 28, 2006 Portable, custom-designed Tanks and Kettles can be supplied with scraped-surface agitators along with high-shear and propeller mixers for applications to 2 million cps. Available with jacketing and insulation, vessels can be designed for pressure/vacuum services in addition to normal atmospheric operation. Ranging in size from 1 gal lab units to larger scale production equipment, units can include casters and push handles with pipe frame carts or flat caster plates.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Jun 28, 2006 Designed for cooling applications where quiet operation is required, 4200 Series provides up to 4,500 W of heat removal and can maintain process temperatures from 61-104°F with 2.0°F stability or better. Units transfer waste heat directly to facility's water supply via liquid-to-liquid heat exchanger. Temperature is controlled via microprocessor-based controller, which automatically compensates for variations in temperature or flowrate of facility water.

Lee Industries, Inc.
Philipsburg, PA 16866
Sep 23, 2005 Inclined, Double-Motion, Scraped-Surface Model 9MSI is available in variety of specialized designs for product viscosities as high as 2,000,000 cps. Piggyback motors for independent speeds and variety of turbine and lift fins offer alternatives to difficult mixing solutions. Unit is offered as single shell or jacketed kettle for vacuum pressure and various sanitary configurations.

Hart Scientific, Inc.
American Fork, UT 84003 9775
May 11, 2005 Suited for calibration of thermometers and temperature sensors, constant-temperature fluid baths provide 18 in. of depth in 14 x 31 in. footprint. They accommodate 4.2 gal of bath fluid and calibrate thermometers in batches of 10 or more. Models 6331, 7321, 7341, and 7381 cover temperatures from –80 to +300°C and offer uniformities to ±0.007°C. Each bath comes with RS-232 port, Windows®-based control software, drain, and overflow reservoir.

ATS RheoSystems
Bordentown, NJ 08505
Mar 31, 2005 Made of corrosion-resistant materials, High Pressure Cell (HPC) is suited for studying rheological properties of samples at pressurized conditions with full viscometry and limited oscillatory capabilities. Unit, which enables studies at temperatures from -20 to +300°C and pressures to 5,900 psig, incorporates 5 universal ports that provide for possibility of flow through experiments. Applications include polymer solution addition and gel formation processes.

Lee Industries, Inc.
Philipsburg, PA 16866
Feb 18, 2005 Capable of up to 10,000 cps, High-Shear Mixing Kettles are available in sizes from 20–1,000 gallons. They are suited for difficult materials that are hard to emulsify, such as creams, lotions, and toothpastes. Alternate scraped-surface designs up to 1,000,000 CPS and larger capacity vessels are also available. Vacuum/pressure with tilt-out agitators can be included to facilitate cleaning, maintenance, and inspection.

Webster Engineering & Manufacturing Co. LLC
Winfield, KS 67156
Jan 19, 2005 HDS Series improves operational performance of fire-tube boiler by widening differential between high fire and low fire. It offers 10 to 1 turndown, UL/cUL approval, and NOx levels of 20 or 30 ppm with Induced Flue Gas Recirculation. Removable burner drawer and flame shaping capabilities of combustion head add to product performance. Burner horsepower ranges from 200-600 hp with UL/cUL approval and up to 1,200 hp for gas, oil, or combination fuels.

Laitram Corp., The
New Orleans, LA 70150
Jan 06, 2005 Model FC300 cooks PTO (peeled, tail-on) and other peeled shrimp by allowing infeed of shrimp in trays or in bulk. Forced convection process cooks shrimp at temperatures below 100°C in order to have shrimp retain natural moisture and flavor. Use of cooker also results in reduced curl.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Jan 03, 2005 EchoTherm™ Model IC20 can freeze, chill, or heat samples in assay plates, centrifuge tubes, vials, and test tubes. Peltier driven unit measures 6.5 x 8.75 x 3.5 in. and comes with chiller/heater module, UPS, and ac line cord. It provides digital display and control of temperature to 1°C; count down timer in days, hours, minutes and seconds to 30 days; data logger; and RS232 interface. Product is suited for various uses in molecular biology labs.

Burnham Corp.
Lancaster, PA 17604-3205
Jul 08, 2004 Horizontal and vertical hydronic heaters, Series BH and BV, are made with reinforced 18- and 16-gauge cold rolled steel, respectively. Both provide quiet operation and are treated for corrosion-resistance with epoxy-based powder coating. Series BKS kickspace heater uses cross flow fan technology and includes epoxy-based powder coated finish. Panelray features flat tube steel design with broad radiating surfaces. Panelray Towel Warmer heats bathrooms, kitchens, or anywhere decorative heating is desired.

Vapore, Inc.
Richmond, CA 94801
Jun 08, 2004 Capillary Force Vaporizer combines capillary force and phase transition to generate powerful jet of pressurized vapor from unpressurized liquid, with no moving parts. When used with consumer products such as fragrances or insect repellant, CFV can disperse active ingredients directly, eliminating need for propellants, fillers, and disposable aerosol cans. When used with liquid fuels, vapor produced by CFV burns like natural gas.

Caron Products & Services, Inc.
Marietta, OH 45750 0715
Apr 28, 2004 Polystat temperature control products provide temperature range from -30 to +200°C and are fitted with independent over-temperature protection device and bath-fluid level alarm. When activated, units give visual and audible warnings and shut down to stand-by mode. Controllers allow administrator to lock out functions that are not required or should not be accessed by operator. Available in 3 versions, interchangeable controllers offer plug & play functionality.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)
Tiverton, RI 02878
Mar 26, 2004 Leister Labo Heater can be mounted virtually anywhere and integrated into variety of processes. Measuring 5 x 1 in., unit requires compressed air line or blower and can be supplied with range of nozzles to meet application. Miniature tool is offered in 120 V, 550 W version that produces 1,100°F and 230 W, 800 V version that reaches 1,150°F. It is suited for heat staking or thermal riveting plastics, drying adhesives and inks, and soldering and de-soldering.

Eclipse Combustion
Rockford, IL 61103
Mar 19, 2004 ThermJet PCA nozzle-mix burner accepts preheated air in temperature range of 1,000°F, and delivers precise temperature uniformity in intense stream of hot gas with velocities from 250–750 ft/s. Burner can be operated with any firing methodology, including on/off, pulse, time proportional, modulating, or high/low. Available in 14 sizes up to 20 mm Btu/hr, burner can be fired on natural gas, butane, or propane.

Fenwal
Ashland, MA 01721
Feb 12, 2004 Model 35-73 Intermittent Pilot Gas Ignition Control is microprocessor-based and polarity insensitive. Featuring repeatable timing sequences, it provides TFI times up to 120 sec, single spark and sense and remote flame sense options, thermostat/power off and automatic reset options, and on-board diagnostics with LED output. CSA certified unit is suitable for controlling pilot and main gas valves, monitoring flame, and igniting LP and natural gas buners.

Caron Products & Services, Inc.
Marietta, OH 45750 0715
Dec 22, 2003 Model 2050W provides temperature control from -18 to 90°C. With pumping capabilities to externally circulate, CE-marked, 230 V unit is suited for end-user and OEM applications including electron microscopes, general laboratory apparatus cooling, water-jacketed incubators, rotary evaporators, and laser cooling.

Wayne Combustion Systems
Fort Wayne, IN 46803
Dec 15, 2003 Nighthawk LC1000 fires up to 1.4 million BTU/hr, while Model LC2000 fires up to 2.3 million BTU/hr. Both are available as On-Off, Fully Modulating, or Low-High-Low. Applications include hot water heaters, boilers, process heating, ovens, incinerators, and indirect heating.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Oct 28, 2003 Suited for use with biological and other samples, EchoTherm™ SC20 Digital and SC25 Fully Programmable Dry Baths are Peltier driven. They offer control to 1°C; mix speeds from 200–1,000 rpm; and backlit, 2-line, alphanumeric display. Variable-speed orbital mixer allows for simultaneous mixing and controlling of sample temperatures. Features include 30-day count down timers with alarm and Auto-off, data logger, and RS232 I/O port.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Sep 17, 2003 Model 3370 Liquid-to-Air Recirculator delivers 13,640 BTU cooling capacity at 68°F and can handle liquid temperatures as high as 170°F. Positive displacement pump circulates fluid at up to 1.5 gpm to equipment, back into reservoir, and through fan-cooled radiator, which removes heat. Built-in, low-liquid level indicator safeguards reservoir and circulation system. Pump and cooling system are further protected with reusable filters.

Hart Scientific, Inc.
American Fork, UT 84003 9775
Aug 12, 2003 Constant-temperature, Deep-Well Compact Baths provide 18 in. of depth to accommodate liquid-in-glass thermometers, SPRTs, and other long-stem thermometers. Four baths in series cover temperatures from -80 to +300°C. Stabilities are from ±0.005 to ±0.015°C and uniformities are as good as ±0.007°C. Each bath comes with RS-232 port and Windows-based control software and is compatible with MET/TEMP II software for completely automated calibrations.