RCI Technologies    San Dimas, CA 91773
Jun 07, 2013 Available in 5, 11, and 25 gpm flow rates, PLC-controlled Fuel Recirculating System (FRS) BL (basic-level) series automatically cleans and circulates stored fuel on preprogrammed schedule. System has key switch and 24 hr, 7 day programmable clock. Comprising RCI fuel purifier, continuous-duty motor, and fuel pump, system has one general alarm relay contact that can be triggered by pump failure, purifier high water level, system high pressure, and fuel catch basin leak.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
May 22, 2013 Forced-Age Testing Circulating Bath features -10 to +60°C working temperature range, ±0.5°C temperature stability, and up to 2,850 W cooling capacity. In addition to 22 x 32 x 16 in., 50 gal access reservoir, unit has 2,250 W heater and circulating pump with up to 4.3 gpm internal flow. System operates on 208–230 V, 60 Hz or 240 V, 50 Hz single-phase electrical power. It is suited for food stability testing, product quality analysis, and accelerated beer and beverage shelf life testing.

JLCC, Inc.    Lindale, TX 75771
May 06, 2013 By warming natural draft boilers, Warm-Up Burner creates draft necessary to begin burning solid fuel; thus, there are no forced-draft or induced-draft fans to interlock to. Controls on burner provide for flame supervision and ability to lockout fuel in event of flame failure. Burner has been approved by FM Global.

LIMO    Dortmund   Germany
Mar 27, 2013 Consisting of 9 fiber-coupled laser modules, L³ LIMO Line Laser System with LIMO Beam Shaping module produces 80 x 0.2 mm homogenous line, with inhomogeneity of less than 2.5% and high intensity of 10 kW/cm². Laser beam can directly irradiate object or be displayed onto target plane via projection lens. Specifically designed for continuous use, system may be considered for short-term tempering, rapid thermal annealing, laser-induced thermal printing, and drying of paints and polymers.

Specialty Coating Systems    Indianapolis, IN 46278
Feb 28, 2013 Precisioncure TC is available with 3 or 7 heating zones, featuring independent closed-loop blower speed control to ensure stable thermal performance. Power lift hood allows access to process chamber, while Windows®-based software offers data logging capabilities. Thermal cure system mates seamlessly with Precisioncoat, providing efficient coating and curing.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 25, 2013 Available in wraparound or flip chip versions as well as integrated on PCB substrate, Sfernice MEPIC Massive Electro-Pyrotechnic Ignitor Chip Resistor offers Joule effect or flash ignition for fast firing times down to 250 µs. Unit converts electrical energy into heat energy in precise electro-thermal profile for purpose of initiating series of pyrotechnic events in controlled energetic reaction. With ohmic range of 2 Ω ±10%, device is suited for deployment of airbags and other safety devices.

Mokon    Buffalo, NY 14207
Jan 03, 2013 Offered in 12 or 24 kW heating capacities and single zone configurations, Duratherm MAX circulating water temperature control system suits restrictive processes and high-temperature water applications. Stainless steel heater vessel is designed and tested to ASME standards, and other elements of construction include nonferrous and stainless steel materials as well as seal-less magnetic drive turbine pump fitted with stainless steel impeller. Heat exchanger is cooled via fan.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Oct 30, 2012 Designed for fecal coliform and E.coli testing, Coliform Bath features ambient +10–135°C temperature range and ±0.7°C temperature stability. Unit is equipped with 28 L reservoir, MX temperature controller, hinged see-through gable cover, and single speed pump, as well as user-adjustable temperature alarms, calibration capability, and chemical-resistant top plate. Backlit readout displays actual and set point temperatures and temperature units plus high/low temperature alarm levels.

TE Connectivity Ltd.    Berwyn, PA 19312
Sep 28, 2012 Measuring 5.8 x 3.75 x 1.15 mm, MHP-TA Series connects bimetal protector in parallel with Polymeric Positive Temperature Coefficient device. In battery cell designs, devices provide resettable overtemperature protection, while utilizing PPTC to act as heater and to keep bimetal latched until fault is removed. Featuring 9 Vdc rating, series comprises low-current MHP-TA6-9 products with approximately 6 A hold current at 25°C, and high-current MHP-TA15-9 products with hold current of 15 A.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Sep 05, 2012 Designed to replicate temperature fluctuations associated with beverage packaging, transportation, and storage, 75 Liter Refrigerated Circulating Bath features -20 to +100°C working temperature range, ±0.005°C temperature stability, and 1.8 ft³ reservoir. Programmable touchscreen controller displays temperature to 1/1000th of 1° and allows endless array of thermal cycling options and programs. Communication options include USB A/B, Ethernet, RS232, and addressable RS485.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Aug 09, 2012 Comprised of 2 dry baths for biological samples, EchoTherm(TM) Model IC22XT can run 2 separate temperatures from -20 to +100°C and 2 different sample blocks simultaneously. Features include data logger, 30-day count down timer with alarm, and RS232 interface. Compatible with robotic systems, bath can be used with accessory sample blocks for 0.5, 1.5, and 2.0 ml centrifuge tubes; PCR tubes and plates; 96- and 384-well assay plates; vials; and test tubes.

CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Apr 20, 2012 Custom designed to meet any application, Caloritech(TM) Ammonia Vaporization Systems electrically heat anhydrous and aqueous ammonia used to control Nitrous Oxide (NOx) emissions in Selective Catalytic Reduction (SCR) applications. Systems are engineered to provide solution to vaporization process, minimizing downtime and maximizing utilization of equipment in installations. Custom options and features include compliance to international codes, standards, and seismic qualification.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Apr 16, 2012 Offered in 40 models, Refrigerating/Heating Circulators feature temperature ranges of -40 to +200°C with temperature stabilities of ±0.005°C. Units have swiveling control head that permits viewing of temperature display anywhere within 180° viewing radius, integral lid docking system for no-mess reservoir cover storage, and corrosion- and chemical-resistant top plate that dampens noise. Six temperature controllers are available, including 2 with time/temperature programming capability.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Mar 16, 2012 Configured for use with Brookfield viscometers and rheometers, TC Series is comprised of 4 models with choice of digital or programmable controllers. Control heads swivel, adjusting to position that best suits operator, and menu-driven color touchscreen features "Help" button that provides user tips and information. Offering USB, Ethernet, and RS-232 connectivity, series is designed with rounded corners and composite deck resistant to stains and chemicals.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Jan 05, 2012 Available in refrigerating/heating and heat-only models with reservoirs sizes from 7-45 L, Circulating Water Baths feature temperature ranges from -40 to +200°C, temperature stabilities to ±0.005°C, and choice of 6 different temperature controllers, including 2 programmable models. Swiveling control head permits viewing of temperature display anywhere within 180° viewing radius, while corrosion- and chemical-resistant top plate dampens noise.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Jul 26, 2011 Measuring 6.5 x 4.75 x 3.5 in. without sample block, Peltier-driven EchoTherm(TM) RIC20 Series is designed for remote controlled applications on robotic and benchtop systems using PC. Any number of RIC20s can be used via RS232 I/O port on each unit and PC serial ports, and complex, user-created temperature/time profiles can be run by leaving computer attached to RIC20. Temperatures can be set from -20.0 to +110.0°C and controlled within 0.1°C. Settings are stable to 0.2°C and accurate to 0.5°C.

Red-Ray Mfg. Co., Inc.    Branchburg, NJ 08876
Jun 30, 2011 Developed around 5 x 12 in. burner, MR-12Ni develops radiant temperatures up to 1,700°F at maximum fire with 2.5:1 turndown ratio and delivers 20,400 BTU per section. Stainless steel frame surrounds edge of porous metallic foam emitter, and plating encases cast iron body in protective layer of corrosion-resistant nickel. Also included, stainless steel hold down mechanism securely locks frame to body.

RCI Technologies    San Dimas, CA 91773
Jun 03, 2011 Controlled via PLC, EL (entry-level) series Automatic Fuel Recirculating System (FRS) cleans and circulates stored fuel on preprogrammed schedule. UL-Listed unit, supplied in NEMA 4, key-lockable cabinet, has key switch and 24 hr, 7 day programmable clock. Available in 5, 11, and 25 gpm flow rates, PLC controls alarms only, and power upgrades are the only available option.

Eclipse, Inc.    Rockford, IL 61103 1299
May 10, 2011 Offered in 3 sizes with max capacity from 200,000-600,000 BTU/hr, Model TJSR v5 can be fired on natural gas, propane, or butane. Unit supports High/Low/Off firing as well as on-ratio and excess air firing. Integral eductor pulls furnace exhaust through internal ceramic recuperator, while internally insulated heat exchanger section and exhaust housing hold heat in recuperative section, adding to heat recovery efficiency. Design eliminates hot air ductwork required by external recuperators.

ZeroPoint Clean Tech, Inc.    Potsdam, NY 13676
Mar 24, 2011 Optimally sized for 1-15 MW projects, ZeroPoint Renewable CHP Solution produces synthesis gas that is suitable for blending with landfill gas to operate existing engines and transmission grid connections. Additionally, biomass gasification solution produces sequestered carbon in form of biochar as co-product, which offers positive environmental and agricultural uses to sequester carbon, including at landfills.