Watlow
St. Louis, MO 63146
Aug 06, 2008 Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

Gaumer Process Heaters
Houston, TX 77040
Jun 20, 2008 Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

Techne Inc.
Burlington, NJ 08016
Feb 29, 2008 Operating over temperature range of ambient to 100°C, Dri-Block® DB-2TC accommodates 2 aluminum insert blocks with independent digital temperature controls, making it suited for multiple users or for applications where samples have to be transferred between 2 temperatures quickly. Unit has heat-up rate of 30-100°C in 19 minutes with temperature stability of ±0.1°C. Compact design allows heater to be placed in fume cabinets where corrosive/toxic chemicals are used.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Sep 12, 2007 Featuring adjustable temperature, pressure, and flow rate alarms, 1.5 ton Refrigerating/Heating Chiller provides heating and cooling for semiconductor fabrication processes. Integral 7,500 or 9,000 W heater controls temperature during vacuum chamber or reaction vessel heating, soaking, and cooling cycles. From 5 to 90°C, with ±0.5°C temperature stability, chiller provides up to 6,328 W of cooling. Its ¾ or 1 hp turbine pump accommodates various process flow and pressure requirements.

Osram Sylvania, Inc.
Danvers, MA 01923
Jul 03, 2007 Featuring digital display temperature control, SKORPION(TM) Process Air Heater provides full closed-loop PID temperature regulation with ±2° accuracy. Device includes serpentine coil design for maximum heat transfer efficiency, blower motor, air intake, and intelligent over-temperature sensing system. All-metal air source ensures operation in dusty environments, and unit also features adjustable air damper for flow control.

OK International
Garden Grove, CA 92841
Apr 06, 2007 Pre-heater convection tool, PCT-100, can be used with or without board holder to perform hand assembly or rework tasks on SMT or through-hole assemblies. Optional dedicated board holder is available, and 10 cfm fan fitted to unit promotes heating and cooling. Designed to promote process control, product uses convection air heating to optimize responsiveness and avoid temperature overshoot. Pre-heater can be used with SnPb solders as well as lead-free ones.

MKS
Andover, MA 01810 2449
Dec 06, 2006 With integrated temperature controller and insulated silicone heater mat, Series 48 Heaters feature re-settable high temperature safety limit device that meets UL® 1998 and CE 60730 requirements. Units provide dedicated mechanical relay output for high-low temperature alert, no-arc relay for power switching, LEDs for local alarm indication, and field programmable set points for adjustable temperature control.

Eclipse, Inc.
Rockford, IL 61103 1299
Sep 29, 2006 Including 4 ultra single-ended recuperative gas burners that are set up on each side of tin bath to provide direct heat to glass, Float Fire Auxiliary Heating System offers up to 850,000 Btu/hr of heat. Gas and air systems handle pressure regulation, while electronics manage safety functions and control of fuel and air to burners. System is also available as portable unit.

Space-Ray
Charlotte, NC 28236
Aug 21, 2006 Available in natural and propane gas with tube lengths from 15-80 ft, LTS Series straight tube infrared heaters come in 19 models and in more than 100 different configurations. Corner reflectors and 90° elbows allow mounting near walls, doors, or corners. Certified for horizontal and vertical venting, heaters can be horizontally mounted for max 75 ft sidewall venting. They are also certified for incline mounting on up to 2 ½ pitch roof surface.

Space-Ray
Charlotte, NC 28236
Oct 28, 2005 Available in natural and propane gas, LTU Series U-tube heaters suit high air change environments and higher mounting heights of 12 ft or over. Unitized low-intensity gas-fired infrared heaters are C.S.A. approved and can be configured to meet variety of industrial and commercial needs.

Space-Ray
Charlotte, NC 28236
Aug 25, 2005 Available in natural and propane gas, LTU series unitized, low-intensity, gas-fired heaters employ one-piece cast-iron burner and come in 21 models with capacities from 40,000-250,000 BTU/hr. Products, mounted at heights of 12 ft and higher, are CSA design certified for horizontal and vertical venting. Features include self-contained draft inducer, calorized aluminized steel combustion chamber, and step opening redundant combustion gas valve.

Minco Products, Inc.
Minneapolis, MN 55432 3177
Aug 23, 2005 Offering tight hole-to-hole tolerance, 384-Hole Heater provides temperature uniformity across 384 well Polymerase Chain Reaction sample block and enables unobstructed view of reaction process. Etched Thermofoilâ„¢ element encourages heat uniformity as reagents are cycled through PCR thermal well steps of denaturing, annealing, and extension. Heater is available with integrated thermistor, or RTD, and can be custom profiled to match any system.

Mi-T-M Corporation
Peosta, IA 52068
May 11, 2005 Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as 12 ft jumper hose with quick connect.

Chromalox
Pittsburgh, PA 15238
Apr 01, 2005 Corrosion-resistant Model HD3D provides comfort heating and freeze prevention in harsh, corrosive, dirty, and wet environments. With stainless steel brackets, hose-down unit can be directly mounted to wall or ceiling. NEMA 4X control box is located on front of heater. Wiring connector provides watertight seal in event of replacement of motor, limit control, or elements. Heater is suited for wastewater treatment plants, steel mills, ships, car washes, and foundries.

Greenheck
Schofield, WI 54476 0410
Mar 17, 2005 Model IG-HV features power-vented, 80% efficient, indirect gas-fired furnace with post-purge cycle. It provides airflow volumes to 7,000 cfm with heating capacities up to 400,000 btu/hr input. Unit is supplied with double width, double inlet, forward curved blowers tested to AMCA standards. It offers 3 heating and ventilation options plus 8 economizer and mixing box options, and can be supplied with 8:1 turndown furnace control.

Owens Design, Inc.
Fremont, CA 94538
Jan 10, 2005 Heating/Cooling Module is BOLTS compatible for integration with standard wafer handling automation. It uses resistive heating elements to achieve better than 450°C heating in less than 15 sec. After processing, module rapidly cools wafer to allow safe return to FOUP. Backside particle and metals contamination is minimized through low contact wafer chuck.

RBI Water Heaters
Westfield, MA 01085
Aug 10, 2004 Futera II Series boilers offer 7 models ranging from 500-1950 MBH and provide up to 85% efficiency with low NOx levels. Advanced troubleshooting and self-diagnostic control provides step-by-step cycle of operation. Optional brushed SS jacket provides corrosion resistance for indoor/outdoor installations in harsh environments. Boilers suit domestic hot water or hydronic space heating applications.

Space-Ray
Charlotte, NC 28236
Apr 26, 2004 Available in 19 sizes with capacities from 40,000-250,000 BTU/hr, LTU unitized, gas-fired radiant U-tube heaters are offered in natural and propane gas versions. Total heater length varies from 17-27.5 ft, and units incorporate self-contained draft inducer; one-piece cast-iron burner; pre-assembled tube and reflector body with 6-bolt aluminized steel burner box assembly; and monitoring lights for on-line diagnosis.

Chromalox
Pittsburgh, PA 15238
Mar 24, 2004 Offered in 3 sizes, CRDS, CRDP, CRTS, and CRTP 2- and 3-element fixtures are available with painted steel or stainless steel housings. They accept interchangeable metal sheath, quartz tube, and quartz lamp elements. Single-element CRC fixtures, with quartz-tube elements, come in 1,500, 2,000, and 3,000 W sizes. Plug-in radiant heaters, CPRG and CPRP, feature quartz tube elements, and RBC-1 consists of heavy-duty single metal sheath element radiant heater.

Space-Ray
Charlotte, NC 28236
Jan 07, 2004 Available in natural and propane gas, Series ETS/ETU Low-Intensity Infrared Heaters vary in length from 15-50 ft and can be used with 5 or 10 ft body assemblies. Series ETS offers multiple configurations, while Series ETU comes in U-shape configurations for spot and area heating. Systems include heavy-duty ball bearing motor and enclosed, pull-through draft inducer, which rotates 45 or 90°. Heaters can be common vented or individually direct vented.