Watlow
St. Louis, MO 63146
Aug 06, 2008 Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

Gaumer Process Heaters
Houston, TX 77040
Jun 20, 2008 Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

Techne Inc.
Burlington, NJ 08016
Feb 29, 2008 Operating over temperature range of ambient to 100°C, Dri-Block® DB-2TC accommodates 2 aluminum insert blocks with independent digital temperature controls, making it suited for multiple users or for applications where samples have to be transferred between 2 temperatures quickly. Unit has heat-up rate of 30-100°C in 19 minutes with temperature stability of ±0.1°C. Compact design allows heater to be placed in fume cabinets where corrosive/toxic chemicals are used.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Sep 12, 2007 Featuring adjustable temperature, pressure, and flow rate alarms, 1.5 ton Refrigerating/Heating Chiller provides heating and cooling for semiconductor fabrication processes. Integral 7,500 or 9,000 W heater controls temperature during vacuum chamber or reaction vessel heating, soaking, and cooling cycles. From 5 to 90°C, with ±0.5°C temperature stability, chiller provides up to 6,328 W of cooling. Its ¾ or 1 hp turbine pump accommodates various process flow and pressure requirements.

Osram Sylvania, Inc.
Danvers, MA 01923
Jul 03, 2007 Featuring digital display temperature control, SKORPION(TM) Process Air Heater provides full closed-loop PID temperature regulation with ±2° accuracy. Device includes serpentine coil design for maximum heat transfer efficiency, blower motor, air intake, and intelligent over-temperature sensing system. All-metal air source ensures operation in dusty environments, and unit also features adjustable air damper for flow control.

MKS
Andover, MA 01810 2449
Dec 06, 2006 With integrated temperature controller and insulated silicone heater mat, Series 48 Heaters feature re-settable high temperature safety limit device that meets UL® 1998 and CE 60730 requirements. Units provide dedicated mechanical relay output for high-low temperature alert, no-arc relay for power switching, LEDs for local alarm indication, and field programmable set points for adjustable temperature control.

Eclipse, Inc.
Rockford, IL 61103 1299
Sep 29, 2006 Including 4 ultra single-ended recuperative gas burners that are set up on each side of tin bath to provide direct heat to glass, Float Fire Auxiliary Heating System offers up to 850,000 Btu/hr of heat. Gas and air systems handle pressure regulation, while electronics manage safety functions and control of fuel and air to burners. System is also available as portable unit.

Minco Products, Inc.
Minneapolis, MN 55432 3177
Aug 23, 2005 Offering tight hole-to-hole tolerance, 384-Hole Heater provides temperature uniformity across 384 well Polymerase Chain Reaction sample block and enables unobstructed view of reaction process. Etched Thermofoil™ element encourages heat uniformity as reagents are cycled through PCR thermal well steps of denaturing, annealing, and extension. Heater is available with integrated thermistor, or RTD, and can be custom profiled to match any system.

Mi-T-M Corporation
Peosta, IA 52068
May 11, 2005 Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as 12 ft jumper hose with quick connect.

Owens Design, Inc.
Fremont, CA 94538
Jan 10, 2005 Heating/Cooling Module is BOLTS compatible for integration with standard wafer handling automation. It uses resistive heating elements to achieve better than 450°C heating in less than 15 sec. After processing, module rapidly cools wafer to allow safe return to FOUP. Backside particle and metals contamination is minimized through low contact wafer chuck.

RBI Water Heaters
Westfield, MA 01085
Aug 10, 2004 Futera II Series boilers offer 7 models ranging from 500-1950 MBH and provide up to 85% efficiency with low NOx levels. Advanced troubleshooting and self-diagnostic control provides step-by-step cycle of operation. Optional brushed SS jacket provides corrosion resistance for indoor/outdoor installations in harsh environments. Boilers suit domestic hot water or hydronic space heating applications.

Despatch Industries
Minneapolis, MN 55440 1320
May 02, 2002 Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It also includes active cooling.

Eraser Co., Inc., The
Syracuse, NY 13221
Dec 06, 2001 The Eraser Company Incorporated offers the Glo-Ring Infrared Heat Tool for use in shrinking heat shrinkable tubing and material used in the assembly of all types of electrical and medical equipment. The Glo-Ring is a hand held, lightweight tool that uses infrared heat to penetrate and shrink tubings. Its circular quartz elements open and close to encircle the workpiece, resulting in quick, even heating and shrinking. The Glo-Ring does not blow hot air, nor does it contain a motor, allowing to be used in a clean room. Four sizes of elements from ½" OD to 3" OD are available. A variable temperature control on the handpiece regulates the amount of heat to the elements.