Hotsy
Camas, WA 98607
Oct 15, 2007 Offering alternative to waste-oil disposal, Waste Oil Heaters are equipped with optimized waste oil supply pump for consistent, trouble-free operation. Three out of 4 models include on-board air compressor. Providing clean combustion, heaters have dual, multi-directional air outlets, swing-out removable burner for cleaning and maintenance, and blower motors ranging from .75-3.6 hp.

Marley Engineered Products
Bennettsville, SC 29512
Oct 05, 2007 Rated at 2,500 W, Models PHFP25 and CHPR25 are designed for installation in concealed spaces including crawl spaces, plenum spaces, and areas between finished ceilings and drop ceilings. They include thermostat range of 40-90°F; enclosed, permanently lubricated fan motors; and fan-delay feature, which eliminates cold-air circulation at start-up. Measuring 14 x 12 in., heaters are crafted from 18 ga steel and protected from corrosion by gray, polyester powder-coat finish.

Watlow
St. Louis, MO 63146
Oct 04, 2007 Suited for semiconductor wet chemistry applications, Thick Film Quartz Heater Modules feature optical trip that protects heater from excessive boiling, non-contact dry fire, and insufficient fluid flowing through heater. Thick film avoids permeability problems experienced with Teflon-coated products by utilizing semiconductor-grade quartz. Intended for deionized water and aggressive chemicals, modules enable glassware fluid pressures up to 75 psi.

Intertec Instrumentation
Milton, ON L9T5A6
Aug 30, 2007 Suited for hazardous areas, Programmable Smart Heater can be fitted with elements capable of outputs from 500 W to 2 kW, making it suited for applications up to 300°F. It includes digital PID controller, as well as RS485 serial networking interface for programming and to network heater to PC for monitoring and diagnostic purposes. Approved for worldwide use by IEC, ATEX, GOST, and CSA, heater is suited for applications in chemical/petrochem, oil and gas plants.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Aug 17, 2007 PURBlue(TM) EC melters facilitate use of reactive polyurethane (PUR) adhesives. Components in contact with PUR adhesive - tank, grid, reservoir, and pump block - can be dismantled to aid cleaning process, while pump shutoff valves and quick-disconnect heater and sensor cables facilitate maintenance. Tank accommodates 39.68 lb adhesive slugs measuring 11 in. in diameter, and inert gas blanket protects adhesive from moisture to prevent premature curing.

ACE Production Technologies
Spokane Valley, WA 99216
Aug 09, 2007 Used as primary preheating function or in combination with ACE discrete preheaters to maintain board temperature during soldering operation, real-time preheating module applies heat to top side of PCB. For high-mass assemblies, unit promotes draw of solder through barrel to top side of board, enhancing formation of solder fillets. Optical pyrometer reads actual PCB temperature with real-time closed loop control.

Chromalox
Pittsburgh, PA 15238
Jun 21, 2007 Powered by electricity, Model LTFX features 4-240 kW open-style coil elements, which may be removed without draining tank, requiring minimal or no process downtime. Unit is equipped with 4-14 in. 150 No. ANSI flange and type J thermocouple for temperature sensing on pipe wall. Heating operation may be fully automated using timers and controllers. With operating temperature of 0-750°F, heater is suited for fire water storage, asphalt, bio-diesel, and animal fats.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jun 21, 2007 Model Z3145 Valve Shot nozzles are designed for processing polyolefins and styrene in shot weight range of 5-25 g. With nozzle front sealing diameter of 10 mm, body diameter of 16.5 mm, and finely scaled nozzle lengths of 80- 140 mm, it is possible to work with small cavity centers and reach difficult gating positions. Balanced filling of all cavities is achieved by simultaneous opening of valve pins after certain amount of pressure has built up.

Komax Systems, Inc.
Wilmington, CA 90748 1323
May 25, 2007 Based on Hi-Pass(TM) non-clogging static mixer, Klean-Flow heat exchanger suits wide range of municipal and industrial applications including municipal sludge digesters, biogas recovery, ethanol production, and animal waste heat recovery. Unit comes with contoured elements to maximize heat transfer while eliminating corners that can trap solid or fibrous materials.

Omega Engineering, Inc.
Stamford, CT 06907
May 24, 2007 Able to be conformed to many flat and curved surfaces, Kapton® Heater Kits are suitable to various applications. Kits include etched foil heaters that withstand temperature extremes from -328 to 392°F and are constructed in 15 different shapes. RoHS compliant heater kit offers chemically resistant heaters of multiple resistances and wattages. Applications include automotive, aerospace, agriculture, petroleum, packaging and material handling.

Marley Engineered Products
Bennettsville, SC 29512
May 18, 2007 Designed to achieve uniform heating, 12½ x 10½ in. CWH and SRA Architectural Series promote comfort by eliminating cold-air circulation at start-up and discharging all heated air after thermostat is satisfied. Thermostat range covers 40 to 90°F, and steady air movement is rated at 65 cfm. Offered under Berko and Qmark brands, each includes 7 models of increasing strength (from 500-2,000 W at 120, 208, 240, or 277 V) and can be field-adjusted to provide 100% or 50% of rated output.

Ameritherm Inc.
Scottsville, NY 14546
Apr 26, 2007 Capable of 4U rack mounting, EASYHEAT CE-rated Heaters provide 4.2, 6, 9, and 10 kW power levels. Units include multi-language display, ability to set user-defined heating profiles, and ability to alert operator of changes in tap settings. Weighing 36 lb, heaters maintain operation even under harsh conditions. Power supply has option to be controlled remotely through serial interface.

OK International
Garden Grove, CA 92841
Apr 06, 2007 Pre-heater convection tool, PCT-100, can be used with or without board holder to perform hand assembly or rework tasks on SMT or through-hole assemblies. Optional dedicated board holder is available, and 10 cfm fan fitted to unit promotes heating and cooling. Designed to promote process control, product uses convection air heating to optimize responsiveness and avoid temperature overshoot. Pre-heater can be used with SnPb solders as well as lead-free ones.

D-M-E Company
Madison Heights, MI 48071-2383
Mar 21, 2007 Suitable for applications where volume of melt can differ, Polivalve Valve Gate Hot Runner Systems enable injection flow in simultaneous or sequential filling to create parts with unusual or complex, hard-to-fill geometries. Users can also mold multiple parts of different shapes and sizes in one cycle. Low-shear flow and uniform melt temperature control provide optimized surface quality, free of stress marks or weld lines. Hydraulic or pneumatic activation is available.

Midwest Industrial Supply, Inc.
Canton, OH 44707
Dec 21, 2006 King Cobra(TM) Winter Spray System prevents cold temperatures from causing belt surface friction loss as well as ice build-up on pulleys and idlers. Processor handles temperature changes automatically, and system is programmed to measure outside ambient temperature fluctuations and adjust parameters accordingly. Anti- and de-icing system minimizes shutdowns, hand spraying, and need for personnel to monitor conveyor belt during extreme weather conditions.

Garon Products, Inc.
Wall, NJ 07719 1924
Dec 20, 2006 Offered as rock salt alternative, De-Icer(TM) consists of non-corrosive, pure white, crystalline pellets that instantly unleash radiant heat upon contact with ice and snow. Compound is effective down to -60° to keep walkways clear, clean, and safe without causing messy salt slush. OSHA-compliant pellets, compatible with spreaders for application over larger areas, can be applied shortly after snowfall to prevent heavy accumulation.

MKS
Andover, MA 01810 2449
Dec 06, 2006 With integrated temperature controller and insulated silicone heater mat, Series 48 Heaters feature re-settable high temperature safety limit device that meets UL® 1998 and CE 60730 requirements. Units provide dedicated mechanical relay output for high-low temperature alert, no-arc relay for power switching, LEDs for local alarm indication, and field programmable set points for adjustable temperature control.

Induction Atmospheres
Rochester, NY 14624
Dec 01, 2006 With 3 x 3 ft footprint, Model HS-2 is designed for open-air operation in lean manufacturing environment. It is equipped with 2 kW induction heating power supply and 4-position induction coil. Side-mounted control console includes start/stop push buttons that place system into auto run mode. Full manual control is available for process development. System may be adapted for variety of different products with change-over fixturing and PLC control.

Ameritherm Inc.
Scottsville, NY 14546
Nov 30, 2006 Available in 25-135 kW models, EKOHEAT induction heating systems are CE rated and offer 352-528 Vac capability. Modular systems allow placement of heating units up to 100 ft from power supply, which can be remotely controlled through serial interface. Able to maintain operation even under harsh conditions, EKOHEAT features include ability to set user-defined heating profiles and multi-language display.

Research, Inc.
Brooklyn Park, MN 55428
Nov 28, 2006 Utilizing 4 elliptical reflectors, ChamberIR Model E4 focuses high-density infrared energy generated by T3-style halogen lamps onto cylindrically shaped target area. Elliptical chamber rapidly heats small-size continuous materials with OD less than 0.25 in. Designed to heat up and cool down instantly in response to power control signals, lamps reach 90% of full operating temperature within 3 sec of cold start. Reflectors come in heated lengths of 2, 5, 6, 10, 16, 25, and 38 in.