Murata Electronics North America, Inc.
Smyrna, GA 30080
Nov 06, 2008 Positive Temperature Coefficient (PTC) Ceramic Heater Pill provides instant heat within seconds of turning on cold car, eliminating idle time, which helps save fuel and reduce emissions. It is mounted in finned metal holder that heats up and warms air moved over its surface, and due to its inherent self-regulating characteristics, unit does not overheat. Heater pill can be used as cold start booster to main heating system, or as rear seat heater in larger vehicles.

Paragon Industries, L.P.
Mesquite, TX 75149
Nov 05, 2008 Operating inside standard microwave oven, Paragon MagicFuse ceramic fiber kiln has 4½ in. dia round firing chamber and reaches glass fusing temperatures in 5-8 min. After kiln is removed from microwave, glass takes about one hour to cool to room temperature. Unit comes with 6½ in. ceramic posts, glass separator, and 15-page instruction manual.

Omega Engineering, Inc.
Stamford, CT 06907
Oct 10, 2008 CE compliant HGL Series fan heaters help to protect failure of electronic components caused by condensation and corrosion by maintaining minimum operating temperatures in enclosures. Applications include electrical and electronic enclosures, display panels, access and parking control systems, and personnel booths.

IRphotonics
Hamden, CT 06518
Oct 01, 2008 Providing heat by infrared radiation, iCure(TM) AS200 portable inline system is tailor-made for automated manufacturing processes requiring rapid adhesive curing and localized heating of bonded assemblies. System combines iGuide infrared optical fibers and infrared optical assembly with light source in microprocessor-controlled benchtop unit. Available with array of accessories for variety of applications, system eliminates need for multiple thermal ovens.

BTU International, Inc.
North Billerica, MA 01862
Sep 29, 2008 Including second-generation spray coater that features topside and bottom-side phosphorus coating, along with quartz lined diffusion furnace, Meridian(TM) in-Line diffusion equipment is suited for alternative energy and electronics manufacturing markets. Spray coater has integrated design and uses corrosion resistant materials that minimize risk of process contamination.

Space-Ray
Charlotte, NC 28236
Sep 17, 2008 Available in natural and propane gas, PTS/PTU Series uses positive pressure to push products of combustion through calorized aluminized or alumatherm steel combustion chamber. Units come with choice of 1- or 2-stage input controls and totally enclosed burner box that places power, thermostat, and gas connections in one location. Offered in 8 models ranging from 10-70 ft long, heaters include Tube Integrity Safety System(TM), which shuts down heater upon heat exchanger failure.

Watlow
St. Louis, MO 63146
Sep 15, 2008 Suited for TCO, PVD, and lamination applications, Interference Fit Construction Heaters (IFC) can be produced in single sheets or array of small heaters to achieve dimensions of larger than 47.24 x 55.11 in. with process heater temperatures greater 1,022ºF. They can also be designed with aluminum and SS heater plates for process temperatures up to 750° and 1,200ºF, respectively. IFCs can be used in atmospheric or vacuum environments, preventing outgassing and contamination.

Watlow
St. Louis, MO 63146
Sep 02, 2008 Constructed of helical coiled tube cast into aluminum body with replaceable cartridge heater in center, CAST-X 500 is intrinsically safe and will not burn fluids. Stainless steel fluid path assures compatibility with various materials. Non-welded construction supports operation up to 3,000 psi and 350°F, minimizes potential leakage, and self drains when mounted vertically. Since gas or liquid never come in contact with heater, CAST-X 500 suits applications requiring fluid cleanliness.

Thomas & Betts Corp.
Memphis, TN 38125
Aug 28, 2008 Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive displacement fuel metering pump, and automatic thermostat-controlled operation.

Watlow
St. Louis, MO 63146
Aug 19, 2008 Interference Fit Construction Heaters address photovoltaic (PV) cell substrate applications requiring large heated surfaces. Insertion of tubular style heater into undersized mill groove pattern offers repeatable thermal performance and promotes reliability of entire heated plate by eliminating potential hot or cold spots. Single sheets or array of small heaters can be produced to achieve dimensions larger than 47.24 x 55.11 in. with process heater temperatures greater than 1,022°F.

Watlow
St. Louis, MO 63146
Aug 19, 2008 Custom-designed to meet application and power supply needs, flexible polyimide heaters can operate in temperatures down to -319°F. Polyimide construction, resistant to radiation, solvents, and chemicals, exhibits tear resistance, dimensional stability, and minimal outgassing. Products are suited for medical device applications and clinical diagnostic instrumentation requiring low-mass heaters. Examples include IV heaters, respirators, and eye surgery endoscope warmers.

Minco
Minneapolis, MN 55432
Aug 13, 2008 Sandwiched between layers of flexible insulation, etched foil or wire-wound heater elements can have uniform or profiled heat patterns. Heaters can integrate temperature sensors, flex circuits, instruments, or other electronics to provide total heating solution. End-users can choose from various standard configurations or request custom heating solution. Available types include Polyimide (Kapton®) Thermofoil(TM), Silicone Rubber, Thermal-Clear(TM), Mica, and All-Polyimide Heaters.

Watlow
St. Louis, MO 63146
Aug 06, 2008 Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

Watlow
St. Louis, MO 63146
Jul 25, 2008 Developed to address photovoltaic industry's transition to processing PV cells on large glass, stainless steel, and polymer substrates, Large Thick Film Flat Panel Heaters can be produced in single sheets or array of small heaters to achieve dimensions of larger than 47.24 x 55.11 in. with process heater temperatures up to 1,022°F. Units are suited for both atmospheric and vacuum environments, and with single-piece construction, they can be manufactured with .13 in. profile.

Kebaili Corporation
Irvine, CA 92616
Jul 03, 2008 Featuring platinum resistive thin-film microheater attached between freestanding thin-film silicon nitride and silicon dioxide membranes, KMHP-100 MEMS microhotplate can operate continuously at up to 650°C. It consists of micromachined silicon die attached to gold-plated TO-18 package, which insures stable operation in harsh/hostile environment. Freestanding thin-film silicon nitride membrane thermally/electrically isolates platinum microheater from silicon substrate microstructure.

Minco
Minneapolis, MN 55432
Jun 27, 2008 Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and suitable for heating LCDs, cockpit displays, outdoor card readers, and portable military radios.

INDEECO
St. Louis, MO 63144
Jun 20, 2008 In addition to T3C, 320°F ignition temperature code rating, ULTRA-SAFE(TM) EXP features dual over-temperature protection with automatic and manual reset over-temperature cutouts. Product uses non-toxic propylene glycol heat transfer fluid and has 70 psig relief valve setting. Three available corrosive-resistant construction options are available for use in dry, non-corrosive areas; wastewater treatment plants; and chemical plants where chlorides are present.

Gaumer Process Heaters
Houston, TX 77040
Jun 20, 2008 Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

Omega Engineering, Inc.
Stamford, CT 06907
May 28, 2008 Providing even heat to contents of drum, DRUM-DHW-55 Series of OMEGALUX® drum heaters feature built-in thermostat that measures 50-425°F and metal screen that is grounded electronically for safety. Heaters wrap around standard 55-gallon drum and attach with spring and hook arrangement. Suited for petroleum, mining, manufacturing, pharmaceutical, and chemical industries, they are resistant to mechanical damage and chemical substances.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Apr 03, 2008 Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.