Nexus Technology
Nieuwerkerk aan den IJssel   Netherlands
Feb 22, 2008 Available in black, blue, and plain aluminum, HXR-5500 features aluminum extrusion heatsink with integrated 5 mm dia heat pipe used to cool memory modules. Heat pipe transports heat from memory module onto detached aluminum heat sink on top of module. By using this product, memory module temperature can be reduced by 13 to 14°C.

Solex Thermal Science, Inc. (formerly Bulkflow Technologies, Inc.)
Calgary, AB T2Z3V6  Canada
Nov 20, 2007 Fully enclosed and totally sealed, Bulkflow Heat Exchanger consists of closely spaced, hollow, fully welded heat exchanger plates. Solution eliminates concern for dirt or contamination while indirectly heating or cooling free-flowing powder and bulk solids. Able to integrate with existing equipment, modular solution has mass flow discharge feeder that controls product flow rate and regulates throughput. Static design has no moving parts and ensures gentle product handling.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Oct 25, 2007 Compatible with all commonly used refrigerants, Enviro-Pak enables restaurant owners to get free hot water by capturing otherwise wasted heat piped away from refrigeration or central air conditioning systems in 1.5-5 ton range. Heat recovery system uses excess refrigerant energy to reduce water heating equipment load and provide free domestic hot water for cooking and cleaning. Quietly operating system comes with white powder coat or stainless steel jacket.

Komax Systems, Inc.
Wilmington, CA 90748 1323
May 25, 2007 Based on Hi-Pass(TM) non-clogging static mixer, Klean-Flow heat exchanger suits wide range of municipal and industrial applications including municipal sludge digesters, biogas recovery, ethanol production, and animal waste heat recovery. Unit comes with contoured elements to maximize heat transfer while eliminating corners that can trap solid or fibrous materials.

MEGTEC Systems
De Pere, WI 54115-5030
Feb 06, 2007 By extracting wasted heat from process dryers, ovens, and air pollution control systems, Process Heat Recovery System heats areas of plant or process. Measuring 4 x 21 ft, unit works with existing or new product lines. It prevents condensation from forming, eliminating disposal issues. System allows choice of heated air delivery or cooling air when ambient conditions permit, and is capable of energy recovery with source temperatures from 200-700°F.

Parker Hannifin Corp., Parflex Div.
Ravenna, OH 44266 9137
Feb 02, 2007 Available in continuous lengths up to 1,000 ft, Multitube® Bundles offer consistent high-temperature maintenance and low/high ambient fluctuation durability without need for field input power splice connections. Constant-watt heating element eliminates cold spots that could affect analyzer readings. Even during extreme ambient temperature fluctuation of -30°F, product maintains critical temperature levels consistently with accuracy rating of 99%.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Dec 12, 2006 Engineered to minimize water heating equipment load, Enviro-Pak hot water maker and heat recovery unit uses excess refrigeration energy of existing or newly installed air-conditioning or refrigeration systems in 1.5-5 ton range. Unit can be used with R-22 or R410a applications, and can provide increase in SEER for older systems up to 3 SEER points. Offered with white powder coat paint or stainless steel jacket, system includes indicator lights for operational and safety diagnostics.

Delphi
Troy, MI 48098-2815
Dec 05, 2006 Requiring no compressor or chemical refrigerants, HMX Heat and Mass Exchanger enables water-fueled air conditioners to cool homes, office buildings, and industrial spaces without generating greenhouse gas emissions. System capitalizes on thermodynamic M-Cycle, which harnesses endless supply of atmospheric energy to drive cooling. Cooling capacity and Energy Efficiency Ratio increase along with temperature outside, minimizing power consumption during peak demand.

Smiths Medical
London NW11 8DS  United Kingdom
Nov 07, 2006 Portex® Thermovent® T2 Heat and Moisture Exchange (HME) Device provides humidification for spontaneously breathing patients whose upper airways are bypassed by tracheostomy tube. It includes easy-opening port for suctioning, and oxygen line connection port for supplementary oxygen. Oxygen reservoir end caps are rounded for patient comfort, while clear housing allows visualization of HME. Device may be used for 24 hr max and is suited for patients with tidal volume greater than 70 ml.

SGL Carbon Technic, LLC
Strongsville, OH 44149
Sep 28, 2006 Allowing operation in countercurrent flow regime, Model RM Multi-Tube Bundle Exchanger handles applications with close temperature approaches or temperature crosses. Bundle modules can be removed for cleaning, inspection, or replacement. Impervious graphite exchangers are used for heating and cooling corrosive chemicals such as hydrochloric acid, sulfuric acid, and phosphoric acid.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Aug 31, 2006 Featuring integral fan that blows air through linear field of flat aluminum fins, Juneau ATS-405 Active Heat Sink delivers thermal resistance of 0.51°C/W with thermal grease. Developed to cool Freescale processors in restricted height enclosures, Anchorage ATS-474 Passive Heat Sink features maxiFLOW(TM) angled fin technology with thermal resistance of 1.05°C/W in air velocity of 100 lfm and 0.49°C/W in air velocity of 400 lfm.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Aug 01, 2006 Measuring 9 mm in height, Model EX2 is suited for use inside enclosures where space is limited. Case-to-ambient thermal resistance is 1.8°C/W within air velocity of 600 fpm. Unit can be securely attached to component with double-sided, thermally conductive adhesive tape. No mechanical hardware is required.

Pfannenberg
Lancaster, NY 14086
May 30, 2006 Side mount heat exchangers, designed for complete outside or inside cabinet installation, are available in cooling capacities from 650-5,000 W. Suited for use in various industries, they provide thermal management of electrical and electronic enclosures. Each unit features integrated temperature monitoring and compact design with thermostat and solenoid valve for temperature control. Products are sealed and maintenance-free with NEMA 12 rating.

DENSO Corp.
Aichi 448-8661  Japan
Mar 28, 2006 Targeted for automobile air conditioning systems, double-pipe internal heat exchanger integrates 2 pipes into one pipe with inner and outer tubes. Inner tube wall has spiral grooves that face outer tube, which enhance heat exchange and ensure that gap between inner and outer tubes is maintained when pipe is bent during installation into vehicle. Pipe length can be as small as 16 in. to achieve sufficient cooling.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Mar 21, 2006 Designed for IBM 7014-T42 rack, Model 6858 Rear Door Heat Exchanger enables server density to be increased without increasing cooling requirement in computer room. Water-cooled unit removes up to 50,000 Btu/hr of heat from air exiting back of fully populated rack before it enters room. Rear door design attaches to customer-supplied water, using industry-standard fittings and couplings.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
May 09, 2005 Able to increase server density without increasing cooling requirements, Rear Door Heat eXchanger is designed to dissipate heat generated from back of computer systems. It attaches to customer supplied water and can dissipate up to 50,000 BTUs of heat from air exiting from back of full rack of servers before it enters room. Unit fits on IBM Enterprise 42U racks.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Apr 22, 2005 Measuring 4–7 mm in height, blueICEâ„¢ Heat Sinks feature thermal resistance as low as 1.23°C/W within air velocity of 600 fpm. Double-sided, thermally conductive adhesive tape can be used to attach heat sinks securely to components so no mechanical hardware is needed. Units are suited for use inside most telecommunications enclosures where space is limited.

ITT Standard
Buffalo, NY 14227 1233
Apr 08, 2005 AirEx® units are offered in AX models with louvered fin design and AXD models with non-louvered fans, which are suited for dirty environments. Each model features aluminum brazed bar and plate construction and option for low-noise operation. Construction includes zinc plated steel fan guard, polypropylene fan blades, and powder painted steel mounting brackets. Products are rated for max working temperature of 250°F and max working pressure of 250 psi.

Cerro Flow Products, Inc.
St. Louis, MO 63166-6800
Dec 22, 2004 CerroSetâ„¢ Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with dry nitrogen and capped to ensure clean, non-oxidized tube prior to installation.

Kooltronic Inc.
Pennington, NJ 08534
Nov 24, 2004 Water-to-Air Model KNHE30 delivers uniform, closed-loop cooling for applications with requirements in excess of what air-to-air models can provide. Measuring 30 x 12 in. with capacity up to 74 W/°F, unit comes in both 115 and 230 V. It is suited for harsh environments where cool, clean water is available. Model KNHE30 includes motorized impeller, M/TAB mounting system, and 6 ft power cord.