Ohmite Mfg.    Rolling Meadows, IL 60008
May 14, 2012 C-series heatsinks feature camming clips that eliminate need for mounting holes and screws and provide same amount of force after repeated use. They are now offered in 30, 58, and 85 mm for TO-264 packages. Series is also offered in 25, 50, and 75 mm lengths for TO-220 and TO-247 devices, and TO-126 heatsinks are offred in 25 mm for single clip and 40 mm for 2 clips. Custom lengths and clip quantities are available.

Allpax Products, Inc.    Covington, LA 70433
Jan 18, 2012 Allpax waste-steam recovery system reduces energy expenditure and water consumption to address overall facility sustainability. In new installations or as retrofit, system captures come-up vent-open waste steam in vented tank where steam condensates into hot (200°F) water that can be used to supplement hot water demands or run through heat exchangers for other plant processes. Vented collection tank is pressure neutral, and heat recovery system with pressure sensors is PLC controlled.

Laird Technologies    Chesterfield, MO 63017
Dec 08, 2011 Designed to circulate either water, water-glycol (anti-freeze), or transformer oil, self-contained Liquid Cooling Systems (LCS) remove heat from densely packed electronic environments by recirculating coolant to predefined temperature set point. Liquid heat exchanger systems cool to ambient, while recirculating chillers cool to temperatures below ambient. Standard heat transfer mechanisms are either liquid-to-air or liquid-to-liquid configurations.

Ohmite Mfg.    Rolling Meadows, IL 60008
Oct 17, 2011 Measuring 2.2 in. across x 1.71 in. tall, MV/MA 302 Series uses 2 internal spring clips for mounting up to four TO-247 or TO-264 devices, eliminating need for mounting holes and screws. Units are constructed of aluminum alloy 6063-T5 or equivalent with either degreased or black anodized finish. Four models are available with thermal resistance of 6.0, 5.2, 3.6, and 3.0°C/W.

Novel Concepts Inc.    San Francisco, CA 94123
May 11, 2011 Developed to fit inside notebooks, monitors, and tablets, ThinSink(TM) cools integrated circuits, semiconductors, LEDs, and other microelectronic heat generating devices. Using 40 mm diameter fan spinning at 6,000 rpm, heat sink consumes 0.031 W of electricity and provides thermal performance of 2.73°C/W. Thin, smooth fan surface eliminates pulsating sound and vibration caused by traditional fan blades. At 6,000 rpm, ThinSink has sound output less than 34 dBA.

Bell & Gossett    Morton Grove, IL 60053
Mar 23, 2011 Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450°F. Double-wall heat exchangers are suited for residential hydronic heating applications such as radiant, snow melt, domestic hot water, and pool heating. They can also be used as refrigerant condensers, evaporators, and oil coolers.

Munters Corporation - Dehumidification Division    Amesbury, MA 01913
Oct 19, 2010 Operating stand-alone or integrated into packaged energy recovery system, Z-Duct(TM) has no moving parts and works in applications where fresh outdoor air is being drawn into building. In air conditioning systems, functionality makes it possible to pre-cool incoming supply air by transferring energy from outdoor air to exhaust air. Reverse is true for heating systems. Dimpled and folded sheet of aluminum or layers of desiccant-coated synthetic media act as primary heat transfer surfaces.

Emerson Process Management    Pleasanton, CA 94566
Sep 21, 2010 Able to measure and control range of liquid hydrocarbons, ROC800L leverages ROC800-Series Remote Operations Controller architecture to accelerate and facilitate installation. Configuration approach, enabled via ROCLINK(TM) 800 software, covers diverse applications, and device can also be programmed to perform PLC functions using Function Sequence Tables or DS800 programming tool. Controller can also be connected to DeltaV(TM) digital automation system, enabling remote sevice diagnostics.

Durex Industries    Cary, IL 60013 2979
Sep 13, 2010 Durocast® Series 250 and 550 cast-in-aluminum heat exchangers heat fluids indirectly instead of via direct immersion, resulting in clean heating environment. Thermal conductivity of aluminum accelerates thermal response and promotes controllability, while design also protects oils and other viscous fluids from thermal breakdown. Capable of heating liquids and gases, these low mass, electric, inline circulation heaters feature heater elements protected from corrosive attack.

Fluorotherm Polymers, Inc.    Parsippany, NJ 07054
Sep 13, 2010 Enhancing heat transfer rate for cooling and heating applications, thermally conductive H2 PFA and FEP fluoropolymer tubing has been integrated into Fluorotherm heat exchangers. Tubing composition has been optimized to provide best combination of thermal conductivity and strength while retaining basic non-stick property of fluoropolymers. Heat exchangers suit applications in steel, metal finishing, galvanizing plants, and chemical processing applications.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 07, 2010 Attached by being pushed onto housing, FK 252 series are designed to accommodate electronic components in TO220 housings with 0.5 mm thick base plates. Integral retaining clips keep component in place and ensure favorable heat transfer from component to heatsink. Series includes 4 different versions: for vertical installation using 2 soldering pins with different lengths, for horizontal soldering, and for installation without soldering pin.

Ironwood Electronics, Inc.    St. Paul, MN 55121
May 17, 2010 Able to dissipate up to 16 W with additional fan mounted on top, HS-SG-6002 is designed for 31 x 31 to 42.5 x 42.5 mm package size, and also serves as compression mechanism for GHz socket. Constructed with 7075 Aluminum and optimized using fin design, heat sink screw has thermal resistance of 0.530 C/W.

Noren Products, Inc.    Menlo Park, CA 94025
Mar 23, 2010 Providing closed-loop cooling, Mighty Mini CC100 delivers small form factor protection against overheating in all types of electrical, electronic, drive, and device control panels. Unit offers 700 BTU/hr cooling capacity with efficiency of 10 W/°C. Sealed enclosure protects electronics from contamination caused by dirt, oil, humidity, and corrosives.

Fluorotherm Polymers, Inc.    Parsippany, NJ 07054
Mar 01, 2010 PVDF frame Immersion Coil Heat Exchangers feature standard tubing coils consisting of either FEP for use with steam pressures up to 30 psig or PFA tubing, which is rated up to 60 psig. Corrosion resistant products are suited for use in cases where tank or bath temperatures exceed 150° F, and can operate up to temperatures of 210° F.

Emerson Network Power    St. Louis, MO 63136
Nov 12, 2009 Mounted in moveable door, which is fixed to frame attached to rear of rack, Liebert XDR removes heat from IT racks before it enters data center. Microchannel unit relies on server fans for hot air movement across cooling coil, utilizing pumped refrigerant which eliminates danger of equipment damage from water leakage. Accommodating new and existing racks, Liebert XDR cools up to 20 kW of rack load, even in environments that are not arranged in hot aisle/cold aisle configuration.

Applied Power Systems, Inc.    Hicksville, NY 11801
Sep 29, 2009 Featuring voltages from 100-20,000 V and currents ranging from 30-3,000 A, Semiconductor Assemblies come in single, double, or 3-phase circuit configurations. Units are also available as full bridge or as series stacks and AC or static switches. Bus bars, gate firing circuits, fuses, snubbers, blowers, and fans are optional. Typical applications include power supplies, AC/DC and static converters, AC phase controllers, UPS, and motor starters.

Dimple-t Bulk Solids Cooler    Winterswijk 7101GR  Netherlands
Aug 19, 2009 Featuring fully welded and totally sealed design, Dimple-t Heat Exchanger indirectly heats or cools free flowing powder and bulk solids, such as sugar or salt, while eliminating concern for dirt or contamination. With no plate supports and manifold pipe welded straight to heat exchanger plates, design eliminates ledges where food products can stay behind. Heat exchanger has no moving parts and does not require fans or large volumes of air to operate.

Lytron, Inc.    Woburn, MA 01801 1039
Jul 28, 2009 With 150 kW cooling capacity, LCS50 liquid-to-liquid cooling system supplies coolant at precisely controlled temperatures to liquid cooled racks and transfers waste heat to facility water. Coolant is delivered to rack, equipment, and electronics above dew point, minimizing risk of condensation. Measuring 24.0 x 48.0 x 77.5 in., unit has 3 temperature control schemes, including control to dew point, and can deliver fluid based on user-defined flow rate or differential pressure.

AMETEK Fluoropolymer Products    Newark, DE 19702
Jul 27, 2009 Incorporating honeycomb construction, Ultra-High Purity Shell and Tube Heat Exchangers are single pass, counter current designs suited for heating and cooling ultrapure water, acids, and other corrosive chemicals used in electronics, pharmaceutical, and semiconductor manufacture. Units are available in shell diameters ranging from 3-14 in. with fluoropolymer lining. All lined metal heat exchanger shells are ASME coded and equipped with TEMA/ANSI end nozzle connections.

Greenheck    Schofield, WI 54476 0410
Jul 07, 2009 Using aluminum core (plate), cross-flow plate exchanger Model PVe recovers up to 60% of energy in exhaust airstream and returns it to supply air. It features stainless steel drain pans, removable hinged doors, belt drive blowers with adjustable pulleys, pitched roof, and integral lifting points and lift locations. Delivering performance of 1,000-6,000 cfm, unit is suited for garage exhaust, welding shops and areas with dry climates.