Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Dec 23, 2010 Suited for laboratories where reproducible, hands-off sample preparation and experimentation are required, EchoTherm(TM) Model HS65 features 12 x 12 in. solid ceramic glass heater plates that can be heated from ambient to 400°C. Stirring speed is 100-1,500 rpm and controlled by optical coupler to 10 rpm. With Model HS65, programming is done through front panel membrane switch and full-function LCD. Unit can store 10 programs in memory with as many as 10 steps each.

Thermal Technology LLC    Santa Rosa, CA 95403
Dec 14, 2010 Suitable for producing 250 mm diameter x 400 mm long crystals, 90 kg K1 Kyropoulos Crystal Grower is designed with multiple, independently controlled heating elements, weight sensors to determine crystal's growth rate, computerized control, and data logging functions. System grows sapphire crystals, which are mostly used in substrate wafers for high brightness blue and white LEDs found in traffic lights, backlighting, and street lights.

Grieve Corporation, The    Round Lake, IL 60073-2898
Nov 23, 2010 Rated to 550°F, No. 834 features 12 KW installed in Nichrome wire heating elements and workspace dimensions of 50 x 30 x 54 in. Stainless steel pans are held by 3 tiers of 17 shelf supports on 3 in. vertical center, and 1,000 cfm, 1 hp recirculating blower provides horizontal airflow to workload. In addition to multiple controllers, oven features recirculating blower airflow safety switch, 4 in. insulated walls, and Type 430 stainless steel interior.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)    Tiverton, RI 02878
Nov 12, 2010 Malcom Hot Air Knife Systems dry machined metal, cast, or stamped parts. They can be configured with one or more hot air blowers, specialty deflectors, air nozzles, or tunnels, as well as various control options to blow air from ambient temperatures up to 1,000°F, at pressures up to 4.5 psi. Incorporating self-contained heat guns, systems fully dry metallic surfaces to prevent corrosion.

Thermcraft, Inc.    Winston-Salem, NC 27117
Nov 10, 2010 Laboratory-oriented eXRESS-LINE products include split or solid tube box furnaces rated up to 1,200°C. Tube furnaces range from 3 in. ID x 12 in. long through 6 in. ID x 36 in. long, and can include power supplies with single set point controllers, interconnecting cables, and thermocouples. Bench top box furnaces feature double-hinged, electrically interlocked vertical lift door and power supply. Recirculating box ovens, rated for 260°C temperatures, are also available.

Heat Trace Products, LLC    Leominster, MA 01453
Nov 03, 2010 Available in standard lengths from 5-200 ft, T-Links Pre-Terminated Heat Trace System facilitates installation of self-regulating heaters. System features T connections that are fail-proof and water-tight, and is available in 3, 5, 8, and 10 W/ft in both 120 and 240 V. Able to be installed under insulation, T-Links can be combined with conventional heat trace and can step up or step down wattage when required. Full line of approved accessories is available.

Husky Injection Molding Systems    Bolton, ON L7E5S5  Canada
Nov 01, 2010 UltraSync(TM) synchronized plate actuated valve gate hot runners, offered in electric, hydraulic, and pneumatic versions, deliver repeatable shot-to-shot and part-to-part consistency through precise stem control. Depending on version, precision is achieved by using electric servo motor, hydraulic cylinder, or pneumatic cylinder option that moves valve stems with 100% synchronization. This lets users tailor unit to specific application needs. Ultra 350/500/750 nozzles are available.

Grieve Corporation, The    Round Lake, IL 60073-2898
Oct 22, 2010 Electrically heated to 350°F, No. 961 has 30 x 62 x 118 in. workspace and 30 KW installed in Incoloy sheathed tubular heating elements. Construction includes 4 in. insulated walls and aluminized steel interior/exterior, removable top-mounted heat chamber, and motor-operated vertical lift door. Workload airflow is provided via 4,200 cfm, 3 hp recirculating blower, and ten 200 lb capacity carriers with roller surfaces (14 x 31 in.) are supported on each side by heavy-duty roller chain.

Syrris Ltd.    Royston SG8 5HW  United Kingdom
Oct 20, 2010 Atlas Hotter Hotplate, suited for use with Atlas automated synthesis system, features temperature control module that allows automated reactions to occur at temperatures up to 350°C. When used in combination with Atlas Lithium system, hotplate enables automated reactions in wide range of round bottom flasks and vials, using dry baths such as stacking dry baths, triple dry baths, and vial baths that remain cool to touch.

Munters Corporation - Dehumidification Division    Amesbury, MA 01913
Oct 19, 2010 Operating stand-alone or integrated into packaged energy recovery system, Z-Duct(TM) has no moving parts and works in applications where fresh outdoor air is being drawn into building. In air conditioning systems, functionality makes it possible to pre-cool incoming supply air by transferring energy from outdoor air to exhaust air. Reverse is true for heating systems. Dimpled and folded sheet of aluminum or layers of desiccant-coated synthetic media act as primary heat transfer surfaces.

Synventive Molding Solutions    Peadody, MA 01960
Sep 30, 2010 With self-bleeding feature, Model QCVG16 eliminates need to bleed air from hydraulic lines. Quick-couple design enables top clamp plate to be removed without removing actuator or valve pin, while pin axial adjustment feature permits valve pin adjustment with or without top clamp plate. Cooling lines for hydraulic valve gate cylinders are drilled in top clamp plate, eliminating need to run lines to each cylinder and chance of water leaking/condensing within hot runner manifold pocket.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)    Tiverton, RI 02878
Sep 29, 2010 Available with single and multiple hot air blowers, specialty deflectors, air nozzles, or tunnels, and various control options, Malcom Hot Air Knife Systems suit coating or preheating substrates. Hot air blowers are adjustable from ambient to 1,000°F with pressure up to 4.5 psi to provide appropriate velocity of heated air. Knifes help in removing water and condensation from bottles and packages before printing, sealing, and labeling.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Sep 24, 2010 Available with 1 or 2 chilling/heating positions, Peltier-driven Chilling/Heating Dry Baths utilize RS232 interface for robotic systems. Units can freeze, chill, or heat samples from -20 to +110°C in assay plates, centrifuge tubes, vials, and most any size test tube. Available in sizes down to 6.5 x 8.75 x 3.5 in., baths feature digital display and control of temperature to 1°C, data logger, and countdown timer in days, hours, minutes, and seconds to 30 days.

Grieve Corporation, The    Round Lake, IL 60073-2898
Sep 23, 2010 Suited for heat treating and high temperature testing applications, No. 871 features 650,000 BTU/hr installed in 3 modulating natural gas burners with floor-mounted combustion air blower. Unit's 7 in. insulated walls are comprised of 5 in. of 2,300°F ceramic fiber and 2 in. of 1,700°F block insulation, while 6½ in. floor insulation is made of 4½ in. of 2,300°F firebrick and 2 in. of 1,900°F block insulation. Workspace dimensions are 30 in. wide x 48 in. deep x 30 in. high.

Emerson Process Management    Pleasanton, CA 94566
Sep 21, 2010 Able to measure and control range of liquid hydrocarbons, ROC800L leverages ROC800-Series Remote Operations Controller architecture to accelerate and facilitate installation. Configuration approach, enabled via ROCLINK(TM) 800 software, covers diverse applications, and device can also be programmed to perform PLC functions using Function Sequence Tables or DS800 programming tool. Controller can also be connected to DeltaV(TM) digital automation system, enabling remote sevice diagnostics.

Durex Industries    Cary, IL 60013 2979
Sep 13, 2010 Durocast® Series 250 and 550 cast-in-aluminum heat exchangers heat fluids indirectly instead of via direct immersion, resulting in clean heating environment. Thermal conductivity of aluminum accelerates thermal response and promotes controllability, while design also protects oils and other viscous fluids from thermal breakdown. Capable of heating liquids and gases, these low mass, electric, inline circulation heaters feature heater elements protected from corrosive attack.

Fluorotherm Polymers, Inc.    Parsippany, NJ 07054
Sep 13, 2010 Enhancing heat transfer rate for cooling and heating applications, thermally conductive H2 PFA and FEP fluoropolymer tubing has been integrated into Fluorotherm heat exchangers. Tubing composition has been optimized to provide best combination of thermal conductivity and strength while retaining basic non-stick property of fluoropolymers. Heat exchangers suit applications in steel, metal finishing, galvanizing plants, and chemical processing applications.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 07, 2010 Attached by being pushed onto housing, FK 252 series are designed to accommodate electronic components in TO220 housings with 0.5 mm thick base plates. Integral retaining clips keep component in place and ensure favorable heat transfer from component to heatsink. Series includes 4 different versions: for vertical installation using 2 soldering pins with different lengths, for horizontal soldering, and for installation without soldering pin.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Aug 27, 2010 Measuring 6.5 x 8.75 x 3.5 in., EchoTherm(TM) Model IC20XR can freeze, chill, or heat samples from -10 to 110°C in assay plates, centrifuge tubes of all sizes, vials, and most any size test tube. Unit features digital display and control of temperature to 1°C, countdown timer, data logger, and RS232 interface to control unit by computer or to record data. Dry bath is suited for hybridizations, sample prep for PCR, ligations, and enzyme reactions.

Ultraflex Power Technologies    Ronkonkoma, NY 11779
Aug 26, 2010 With output frequency range of 40-400 kHz, UltraHeat W Series accommodates wide range of loads. Output circuit is designed to automatically tune to parameters of load, optimizing output performance. Units are suitable for heat treating, bonding, annealing, and hardening as well as brazing, sealing, soldering, tempering, and shrink fitting.