Rapid Engineering, Inc.    Comstock Park, MI 49321
Apr 11, 2006 Available in inputs from 40,000-200,000 BTU/h and tube lengths from 10-80 ft, gas-fired RAPID(TM) BH Unitary Heater comes in straight, U, or L configurations. Unit is offered in natural gas or propane gas models with aluminized steel tubing and direct spark ignition. Ceiling-mounted heater features parabolic reflector design that gently directs heat downward in vehicle repair shops, warehouses, and manufacturing facilities.

Benko Products Inc.    Sheffield Village, OH 44054
Mar 30, 2006 Sahara Hot Room accommodates and heats up to twenty-four 55-gal drums. Offered as replacement for homemade hot rooms and awkward band heaters, unit may be steam- or electrically heated. Features include spill containment capacity, temperature control, and stainless steel or carbon steel construction.

Cemline    Cheswick, PA 15024
Mar 29, 2006 Vertically packaged SPH Series water heaters provide solution for producing domestic hot water with hydronic boilers including cast iron, copper tube, water tube, or specialty high efficiency condensing boilers. Completely packaged and ready for use, heater is available in range of storage tank volumes from 60-500 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

DENSO Corp.    Aichi 448-8661  Japan
Mar 28, 2006 Targeted for automobile air conditioning systems, double-pipe internal heat exchanger integrates 2 pipes into one pipe with inner and outer tubes. Inner tube wall has spiral grooves that face outer tube, which enhance heat exchange and ensure that gap between inner and outer tubes is maintained when pipe is bent during installation into vehicle. Pipe length can be as small as 16 in. to achieve sufficient cooling.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Mar 21, 2006 Designed for IBM 7014-T42 rack, Model 6858 Rear Door Heat Exchanger enables server density to be increased without increasing cooling requirement in computer room. Water-cooled unit removes up to 50,000 Btu/hr of heat from air exiting back of fully populated rack before it enters room. Rear door design attaches to customer-supplied water, using industry-standard fittings and couplings.

Carrier Corp.    Syracuse, NY 13221
Feb 24, 2006 Hybrid Heat(TM) system combines furnace with heat pump, which also acts as air conditioner in hot weather. Operated via electricity, environmentally sound heat pump moves heat without flame and features Puron® non-ozone-depleting refrigerant. System combines heating methods to minimize effects of gas and electricity costs.

Watlow    St. Louis, MO 63146
Feb 17, 2006 CAST-X SERIES 2000 consists of helical coiled tube cast into aluminum body with tubular elements which serves as heat transfer media between tubular element and coiled tube through which fluid passes through. Fluid path is independent of heater sheath, allowing sensitive and/or ultra pure materials to be heated safely. Standard 316 SS fluid path assures compatibility with various materials, and non-welded construction minimizes potential leakage.

Grieve Corporation, The    Round Lake, IL 60073-2898
Feb 10, 2006 Electrically heated, 500°F No. 949 Oven offers workspace dimensions of 36 x 36 x 51 in. and uses 1,500 cfm, 2 hp recirculating blower to provide horizontal airflow to workload. It features Type 304, 2B stainless steel interior with continuously backwelded seams, stainless steel exterior with No. 4 brushed finish, and 4 in. insulated walls throughout. Oven includes HEPA filters, minihelic pressure gauge, and temperature recorder.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Feb 01, 2006 Measuring 10 x 7 x 4.5 in., Models HS20 Stirring Hot Plate, HP20 Hot Plate, and ST20 Stirrer feature heating surface constructed of solid white 6 x 6 in. ceramic glass. They withstand up to 30 lb by weight and offer temperature settings of 30-450ºC, stirring ranges of 100-1,500 rpm, and 2 memory keys to store settings. Available in 100, 115 and 230 Vac with 3-wire ac line cord, units are CE compliant.

Datapaq Inc.    Wilmington, MA 01887
Jan 27, 2006 With thermal barrier and data logger connected to survey arms, CAB (Controlled Atmosphere Brazing) Surveyor system helps ensure furnace meets conditions for optimum brazing. System captures baseline profile of furnace, and once baseline is achieved, limits are set to ensure conditions around profile are working within specification. Wizard driven software allows setup and analysis of profiles, and color light indicators specify whether run was within specification.

Grieve Corporation, The    Round Lake, IL 60073-2898
Jan 16, 2006 With workspace dimensions of 48 x 48 x 36 in., No. 935 electrically-heated, 500°F oven integrates all safety equipment onboard for handling flammable solvents. Its 12 kW installed in Nichrome wire heating elements powers oven, while 600 cfm, ½ hp recirculating blower provides universal front-to-rear airflow pattern. Construction includes aluminized steel exterior and Type 430 stainless steel interior. Oven also incorporates 10 in. dia circular chart recorder and SCR power controller.

Watlow    St. Louis, MO 63146
Jan 09, 2006 Constructed of thin, lightweight organic polymer film, Polyimide Heaters operate in environments as low as -319°F and are suited for applications requiring low outgassing in vacuum, or resistance to radiation, fungus, and chemicals. Designed for applications requiring up to 1,100°F, Etched Foil Silicone Rubber Heaters are 0.030 in. thick and insulated with mica sheet. Hybrid flexible heaters are silicone rubber heaters with bonded polyimide power flex-lead.

Ulvac Technologies, Inc.    Methuen, MA 01844
Dec 30, 2005 Suited for high-temperature materials testing and analysis, tabletop MILA-3000 heats samples using IR gold image furnace with programmable digital temperature controller; clean, atmosphere-controlled, quartz glass vacuum chamber; and gas controller. Mini-Lamp Annealing system can be used for various heating and cooling experiments, with its controlled heating rates of 50°C/sec, temperature uniformity of ±2°C, and 1 kW power consumption for 20 mm³ samples.

Modine Mfg. Co.    Racine, WI 53403 2552
Dec 30, 2005 With BTU inputs of 30,000, 45,000, 60,000, and 75,000, Hot Dawg® Model HDS draws combustion air from outside, optimizing seasonal heating efficiency and minimizing concerns about dusty, dirty, or humid applications. Operating with natural gas or propane, unit features tubular heat-exchanger design and is certified for residential and commercial use. Applications include greenhouses, tool sheds, wet garages, and hostile environments.

Grieve Corporation, The    Round Lake, IL 60073-2898
Dec 28, 2005 With workspace dimensions of 72 x 36 x 48 in., No. 939 is heated by 700,000 BTU modulating natural gas burners with floor-mounted combustion air blower. Insulated walls are made with 5 in. of 2,300°F ceramic fiber and 2 in. of 1,700° ceramic fiber. Measuring 7 in. thick, floor comprises 4½ in. 2,300°F firebrick and 2½ in. 1,900°F block insulation. Furnace includes manually operated vertical lift door, digital temperature controller, and fused disconnect switch.

Minco    Minneapolis, MN 55432
Dec 26, 2005 Flexible Heaters Prototype Design Kit includes 12 flexible heaters in polyimide and silicon rubber insulation, 100 ohm platinum RTD sensor, and PSA and Silicone RTV adhesive. Non-invasive Sensors Design Kit comes with 5 Thermal-Ribbon, Thermal-Tab, and Bolt-on RTDs to accurately sense temperatures, as well as miniature TempTran(TM) temperature transmitter with 4-20 mA output and silicone stretch tape. Both provide instructional tutorial for experimenting and prototyping.

Speedline Technologies Inc.    Franklin, MA 02038
Dec 08, 2005 With max temperature of 662°F, lead (Pb)-free OmniFlex(TM) 10 Reflow Oven features variable-speed, closed-loop blower control; power limiting, balanced gas flow; and dual-chamber heating design. Process width is 20 in., heated length is 148 in., and and cooling length is 50.5 in. Lead (Pb)-free Electrovert VectraElite(TM), combined with UltraFill nozzles and upper High Velocity Convection pre-heat module, incorporates ServoJet spray fluxer and roll-out solder pot design.

BI Technologies Corp.    Fullerton, CA 92835-1051
Nov 30, 2005 Incorporating measurement circuitry for precise temperature control, Planar Resistive Heaters are available in surface mount, through hole, and custom-profiled models. They offer resistance ranges from 0.1 ohm to 100 k Ω with tolerances to ±1%, TCRs to ±100 ppm/°C, and operating temperature of -55 to +155°C. Applications include outdoor keypads, LCD displays, and disk drives as well as military systems, medical equipment, and external cameras.

Grieve Corporation, The    Round Lake, IL 60073-2898
Nov 25, 2005 Featuring 44 x 30 x 60 in. workspace, No. 944 is constructed with 6 in. insulated walls, aluminized steel exterior, and Type 430 stainless steel interior. It uses 30 kW installed in Incoloy-sheathed tubular heating elements to heat load and 2,000 cfm, 2 hp recirculating blower to provide horizontal airflow to workload. Oven also features onboard digital indicating temperature controller, manual reset excess temperature controller, and 10 in. dia circular chart recorder.

Orison Marketing, LLC    Abilene, TX 79608
Nov 22, 2005 Without using corrosive salts or toxic glycol, IceClear+ prevents ice from bonding to concrete to facilitate removal of snow and ice from driveways and walkways. Non-toxic, non-corrosive product will not stain or damage lawns, shrubs, or concrete. It can be applied 1-2 hr prior to storm as pretreatment, or with pressure sprayer to completely penetrate ice layer.