PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Mar 05, 2010 Designed to accommodate work habits and requirements of laboratory personnel, touch-screen operated refrigerating/heating and heat-only baths are offered with temperature ranges as broad as -40 to +200°C and temperature stabilities as precise as ±0.005°C. There are 6 different temperature controllers, including 2 programmable models, and ergonomic features include swiveling control head, integral lid docking system, and corrosion- and chemical-resistant top plate.

Synventive Molding Solutions    Peadody, MA 01960
Mar 05, 2010 Available with both thermal gate and valve gate options, model 06E threaded/screw fit manifold hot runner nozzle has leak-proof design and 6 mm flow bore with 20 mm mold cut-out. Externally heated solution, designed for shot weights up to 100 g per nozzle, is available in 60-200 mm lengths. Intended for valve gate hot runner systems, model PNC30 pneumatic bolt-on actuator facilitates hot runner installation in mold by providing plug-and-play capability.

Fluorotherm Polymers, Inc.    Parsippany, NJ 07054
Mar 01, 2010 PVDF frame Immersion Coil Heat Exchangers feature standard tubing coils consisting of either FEP for use with steam pressures up to 30 psig or PFA tubing, which is rated up to 60 psig. Corrosion resistant products are suited for use in cases where tank or bath temperatures exceed 150° F, and can operate up to temperatures of 210° F.

BorgWarner    Auburn Hills, MI 48326
Feb 19, 2010 Installed in air conditioning system and connected to vehicle's 400 V electrical system, cabin heaters achieve 3,000 W output to effectively defrost windshields and provide warm, comfortable driving environment for drivers and passengers. Each is designed with high-voltage connection as well as ceramic components and can be modified for all-electric and hybrid vehicles with various electrical system voltages.

Asahi/America    Malden, MA 02148
Feb 17, 2010 Able to withstand aggressive chemicals over extended period of time, Polytetra electric heaters feature stainless steel electrical conductor and electrical cord sheathed in PFA. Connections from conductor to cord are housed within water-tight, machined PTFE block for corrosion resistance. Available in standard models from 120-600 V and 350-4,000 W of continuous power, heaters are offered in standard lengths from 3-15 ft and can be factory bent in any custom shape.

ACE Production Technologies    Spokane Valley, WA 99216
Jan 29, 2010 KISS Selective Soldering machines are offered with N2 Spot Pre-Heater, which allows focus and control of superheated nitrogen on small, user-defined area of electronics assembly. Preheater controls, in conjunction with nozzle and nitrogen cap design, allows user to program delivery of right amount of nitrogen, with proper profile, through nozzle before solder can begin to flow. It also offers proportionate control of parameters such as ramp-to-temperature, volume of flow, and dwell time.

Grieve Corporation, The    Round Lake, IL 60073-2898
Jan 25, 2010 Intended for heating parts, including those with emissions of flammable solvents, No. 991 offers 28 x 24 x 18 in. workspace and employs 4 kW installed in Nichrome wire elements. Construction includes Type 304, 2B finish stainless steel interior; brushed #4 stainless steel exterior; and 2 in. insulated walls. Purge timer and powered forced exhauster with powered forced airflow safety switch are also included, along with 2 oven shelves and leg support stand.

Novellus Systems, Inc.    San Jose, CA 95134
Jan 20, 2010 Used in manufacturing of advanced logic devices at 45 nm and below, SOLA xT modifies physical characteristics of previously deposited film through exposure to UV light and heat. System features customizable optics assembly, on-board UV monitoring, and advanced algorithms to maintain stable wafer-to-wafer performance. With multi-station sequential processing architecture, system allows independent control of temperature, wavelength, and intensity at each station.

Infinity    Worcester, MA 01604
Jan 15, 2010 Available up to 16 kW with process temperatures to 600°C, Compact Resistive Element Heaters Generation 2 replace bulky conventional electric heaters in semiconductor, pharmaceutical, and food industries. Units are available with or without factory turnkey control package, and are designed to withstand no-flow or non-submerged operation for short periods of time without burning out.

Process Technology    Mentor, OH 44060
Jan 05, 2010 Available in 120, 208, and 240 V models, Quartz Infrared Heating Elements have heavy wall quartz sheath and ceramic insulators that provide positive electrical insulation. Elements are capable of reaching full heat in 40-65 sec and offer watt densities of 50 W/in². Suited for curing, baking, and drying applications, elements contain nickel chrome resistance wire with peak wavelength of 2.55 microns, max power density of 1.3-1.75 kW/ft², and heat/cool response time of 1-2 min.

Grieve Corporation, The    Round Lake, IL 60073-2898
Dec 22, 2009 Rated to 2,000°F, electrically heated No. 954 features 30 x 48 x 30 in. workspace and 57 kW, supported by vacuum-formed ceramic fiber, installed in nickel chrome wire coils to heat load. Roof-mounted, heat-resistant alloy recirculating fan is powered by 1 hp motor with V-belt drive, and 100 lb capacity alloy loading cart has cast alloy roller rails. Construction also features motor-operated vertical lift door, 7 in. thick insulated walls, and 6½ in. floor insulation.

Cemline    Cheswick, PA 15024
Dec 11, 2009 Designed for operating using either energy from external solar collector or as dual-energy source unit, Solar Water Heaters use solar controller and double walled brazed plate heat exchanger to maximize heat transfer. Additional heating source, using boiler water, steam, or electricity, can be use in situations where solar energy is lacking or unavailable. They are available in variety of storage tank volumes from 120-680 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

Etip, Inc.    North Aurora, IL 60542
Nov 24, 2009 Universal Filter Preheater(TM) consists of flexible silicone/fiberglass heating pad that wraps around metal filter housing to maintain full contact and evenly transmit heat quickly through metal of filter housing to prevent diesel and bio-diesel fuel gelling in cold weather. Held in place by springs and nylon ties, 4 x 7 in. product converts metal filter housing into heating element and draws 85 W. It is offered in several voltages and designed to fit diameter of 2.5-4 in.

Grieve Corporation, The    Round Lake, IL 60073-2898
Nov 24, 2009 Used to dry ceramic parts, No. 1018 electrically heated oven has 180 kW installed in Incoloy-sheathed tubular heating elements and 40 ft x 18 in. x 18 in. workspace. Three 3 hp recirculating blowers provide airflow to workload, which can be accessed via any of 3 independent doors. Oven contains 12 in. wide, ½ in. stainless steel flat wire conveyor belt with 1/3 hp motor drive, 30 in. long open belt loading zone, and 60 in. long open unloading zone.

Centorr/Vacuum Industries, Inc.    Nashua, NH 03062
Nov 16, 2009 Featuring compact furnace layout with construction on structural steel base, MIM-Vac(TM) M is offered in 18 x 18 x 36 or 48 in. sizes to meet demands of metal injection molding (MIM) industry. Use of Molybdenum alloys in hot zone and retort offer creep resistance, high recrystallization temperatures, and long service life, while Sweepgas(TM) technology promotes consistent gas flow dynamics over all parts. Dry mechanical pumping system with T/P binder condensing trap is also featured.

Hotwatt    Danvers, MA 01923
Nov 13, 2009 Featuring swaged construction and 300 stainless steel sheath with precision dimensions, Superwatt® Heaters ensure efficient heat transfer and tight and stable contact when inserted in end-use equipment. Units have heliarc welds, ceramic caps, and high-temperature fiberglass insulated leads. Resistant to shock and vibration, heaters are suitable for life- and bio-science applications, as well as plastics molding, adhesive dispensing, and instrumentation.

Emerson Network Power    St. Louis, MO 63136
Nov 12, 2009 Mounted in moveable door, which is fixed to frame attached to rear of rack, Liebert XDR removes heat from IT racks before it enters data center. Microchannel unit relies on server fans for hot air movement across cooling coil, utilizing pumped refrigerant which eliminates danger of equipment damage from water leakage. Accommodating new and existing racks, Liebert XDR cools up to 20 kW of rack load, even in environments that are not arranged in hot aisle/cold aisle configuration.

Paragon Industries, L.P.    Mesquite, TX 75149
Nov 09, 2009 Operating from standard household outlet, SC-1 jewelry kiln fires PMC, Art Clay Silver, decals, china paint, and glass. Ceramic fiber firing chamber is wrapped in steel inner case, and layer of air separates inner case from slotted outer steel case. Weighing 15 lb, kiln has 6 x 3¾ x 3 in. interior and digital temperature controller that offers Single Speed and 8-segment Ramp-Hold modes. Product is designed as traveling kiln for seminar teachers or artists with limited work space.

Mitsubishi Electric & Electronics USA, Inc. - HVAC Advanced Products Div.    Suwanee, GA 30024
Oct 27, 2009 Available in indoor and outdoor versions, STAR LINEUP P-Series A30/A36 models feature H2i® hyper-heating capabilities that provide heating down to -13°F. Units also offer moisture removal and optimized HSPF. Ducted PEAD-A indoor model features adjustable return from rear to bottom, quiet operation as low as 30 dB(A), multiple fan speeds, and built-in drain pump.

Grieve Corporation, The    Round Lake, IL 60073-2898
Oct 22, 2009 With 26½ x 2 x 2½ ft workspace, 500°F Model No. 1007 utilizes 60 kW Nichrome wire heating elements and three 3 hp recirculating blowers totaling 9,000 cfm to provide horizontal rear-to-front airflow to workload. Oven has 4 in. insulated walls, aluminized steel interior and exterior, motor-operated rear-hinged door, and compressed air manifold with 8 connections. Designed to NEMA 12 standards, oven includes digital programming temperature controller and 16-point strip chart recorder.