Esterline Leach International
Buena Park, CA 90622
Sep 01, 2006 Model EPM-112 provides power to heating elements while monitoring temperature of windshield, and features 2 control channels, each with 2 independent temperature sensor inputs. Each control channel is rated for providing 1.4 kW to windshield heating elements. Measuring 96 x 80 x 43 mm, 28 Vdc unit weighs 600 g and has -55 to +85°C temperature range. Unit also features continuous BIT as well as over-current/temperature protection.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Aug 31, 2006 Featuring integral fan that blows air through linear field of flat aluminum fins, Juneau ATS-405 Active Heat Sink delivers thermal resistance of 0.51°C/W with thermal grease. Developed to cool Freescale processors in restricted height enclosures, Anchorage ATS-474 Passive Heat Sink features maxiFLOW(TM) angled fin technology with thermal resistance of 1.05°C/W in air velocity of 100 lfm and 0.49°C/W in air velocity of 400 lfm.

Roberts-Gordon, Inc.
Buffalo, NY 14240
Aug 28, 2006 Negative pressure VANTAGE® NP provides even heat distribution from vacuum design with uniform tube temperatures. With inputs from 40,000-200,000 Btu/h and tube lengths from 10-80 ft, heater is suitable for variety of building sizes. Burner box includes protective enclosure allowing minimal heat exposure to electrical controls. Heater can be designed as unitary model in straight, U-tube, or L configurations, or as multiburner model in herringbone, flag, and T configurations.

Induction Atmospheres LLC
Rochester, NY 14624
Aug 25, 2006 Designed for open-air brazing and soldering in lean manufacturing environment, AB-1 occupies 5 x 6 ft footprint and includes 4- or 6-position indexing table. It can be configured with up to 3 brazing stations as well as robotic part loading and unloading. Front panel start/stop push buttons place system in PLC-controlled auto run mode, with full manual control available for process development. Typical brazing cycle times are under 20 sec/part and can be as fast as 3 sec/part.

Weather-Rite, Inc.
Minneapolis, MN 55401
Aug 25, 2006 Available in natural gas or propane gas models, WEATHER-RITE(TM) BH unitary heater features aluminized steel tubing and direct spark ignition. Parabolic reflector design directs heat downward, gently bathing people, floors, and objects in warmth. Available in inputs from 40,000-200,000 BTU/h and in tube lengths from 10-80 ft, heater provides design flexibility with straight, U, or L configurations.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Aug 24, 2006 With EchoTherm(TM) Model HS40, programming is done through front panel membrane switch and full-function LCD. Measuring 8 x 8 in., ceramic glass heater plates offer chemical resistance and can be heated from ambient to 450°C in less than 3 min. Plate surface or solution temperature can be controlled using PID control loop to 1°C of target, and accuracy is 1% of reading using platinum RTD circuitry. Controlled by optical coupler to 10 rpm, stirring speed ranges from 100-1,500 rpm.

Roberts-Gordon, Inc.
Buffalo, NY 14240
Aug 22, 2006 Offered in air volumes from 1,000-60,000 cfm and inputs from 0.1-6.5 Mbtu/hr, direct-fired COMBAT® DF-Series provides multiple installation options, including indoor and outdoor as well as vertical and horizontal configurations. Galvanized steel heaters are available in natural gas or propane gas models with 30:1 fully modulating burner and double-width, double-inlet, forward-curved centrifugal fan that puts 100% of available heat in air stream.

Grieve Corporation, The
Round Lake, IL 60073-2898
Aug 21, 2006 Featuring 36 x 60 x 60 in. workspace, No. 973 has 40 kW installed in Incoloy sheathed tubular elements and integrates 4,200 cfm recirculating blower that provides combination horizontal/vertical airflow to workload. Onboard, motorized roller rack has 2 levels of 4 in. dia rollers, each supported by metallized carbon bearings and driven by sprockets and roller chain. Each level of rollers holds two 20 in. dia stainless steel perforated drums, rotating at 6 rpm, which carry workload.

Space-Ray
Charlotte, NC 28236
Aug 21, 2006 Available in natural and propane gas with tube lengths from 15-80 ft, LTS Series straight tube infrared heaters come in 19 models and in more than 100 different configurations. Corner reflectors and 90° elbows allow mounting near walls, doors, or corners. Certified for horizontal and vertical venting, heaters can be horizontally mounted for max 75 ft sidewall venting. They are also certified for incline mounting on up to 2 ½ pitch roof surface.

Watlow
St. Louis, MO 63146
Aug 04, 2006 Able to be operated up to 1,112°F, ULTRAMIC(TM) 600 features thermally conductive aluminum nitride ceramic composition paired with thermally matched heating element. Monolithic, geometrically stable structure exhibits minimal porosity and has integrated thermocouple configuration that optimizes reliability of sensor/heater interface. Product can be designed and manufactured in 2D flat or ring forms and machined to meet specific design requirements.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Aug 01, 2006 Measuring 9 mm in height, Model EX2 is suited for use inside enclosures where space is limited. Case-to-ambient thermal resistance is 1.8°C/W within air velocity of 600 fpm. Unit can be securely attached to component with double-sided, thermally conductive adhesive tape. No mechanical hardware is required.

Lee Industries, Inc.
Philipsburg, PA 16866
Jul 28, 2006 Portable, custom-designed Tanks and Kettles can be supplied with scraped-surface agitators along with high-shear and propeller mixers for applications to 2 million cps. Available with jacketing and insulation, vessels can be designed for pressure/vacuum services in addition to normal atmospheric operation. Ranging in size from 1 gal lab units to larger scale production equipment, units can include casters and push handles with pipe frame carts or flat caster plates.

IMS Company
Chagrin Falls, OH 44023
Jul 27, 2006 Designed with ceramic cores and alloy tubing to maximize heat transfer, Hot Stix Cartridge Heaters feature high-purity magnesium oxide packing for even heat distribution. Heater leads can withstand temperatures up to 842°F. Hot Stix GP Heaters are suitable for most heating applications, while ¼ in. diameter IN Heaters are designed for internally heated nozzle applications, and TC Heaters include built-in Type J thermocouple.

Despatch Industries
Lakeville, MN 55044
Jun 29, 2006 Paint Sample Baking Tool utilizes multiple variables and chamber-in-chamber design to accurately replicate paint curing process. Via software, users can adjust oven parameters to simulate characteristics of any type of production oven (radiant, direct gas heated, or electric convection) and replicate environmental conditions surrounding specific production facility. Features include monitoring ports, variable air flow velocity, and adjustable incoming dew point air.

Induction Atmospheres LLC
Rochester, NY 14624
Jun 28, 2006 Utilizing solid-state induction heating technology, Model VF-20 heats parts of virtually any shape in high-temperature, high-vacuum environment. It requires less than 8 minutes to reach 1,900°F and cools down to 400°F in less than 20 minutes. Furnace operates at high vacuum or partial pressure of inert gas. Chamber has base vacuum of 5 x 10^-6 Torr with leak-up rate of less than 1 micron/hour.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Jun 28, 2006 Designed for cooling applications where quiet operation is required, 4200 Series provides up to 4,500 W of heat removal and can maintain process temperatures from 61-104°F with 2.0°F stability or better. Units transfer waste heat directly to facility's water supply via liquid-to-liquid heat exchanger. Temperature is controlled via microprocessor-based controller, which automatically compensates for variations in temperature or flowrate of facility water.

Corning Cable Systems
Hickory, NC 28603-0489
Jun 21, 2006 Utilizing radiant heating technology, Heat Shrink Oven rapidly shrinks heat-shrink splice protectors ranging from single-fiber to 12-fiber ribbon. Heat radiation is emitted from heating element onto elliptical mirror where fiber with heat-shrink installed is placed in focal point. LED status display indicates heating, cooling, and time for removal. Oven is available as stand-alone unit as well as with OptiSplice(TM) Premier M90i Fusion Splicer and X77 14K Series Fusion Splicers.

Lucifer Furnaces, Inc.
Warrington, PA 18976 2088
May 31, 2006 Designed for 2,450°F operation, HS Series employs silicon carbide heating elements, which are controlled off line with SCR power supply that automatically compensates for changes in element resistance. Furnace chamber is lined with ceramic fiber and heats to 2,200°F in 55 min. Available in single and dual chamber models in sizes from 6 x 6 x 12 in. to 12 x 18 x 24 in., furnaces feature heavy gauge sheet steel construction, platinum/rhodium thermocouple, and double-pivot horizontal swing door.

Pfannenberg
Lancaster, NY 14086
May 30, 2006 Side mount heat exchangers, designed for complete outside or inside cabinet installation, are available in cooling capacities from 650-5,000 W. Suited for use in various industries, they provide thermal management of electrical and electronic enclosures. Each unit features integrated temperature monitoring and compact design with thermostat and solenoid valve for temperature control. Products are sealed and maintenance-free with NEMA 12 rating.

SciLabware (formerly Barloworld Scientific)
Staffordshire ST15 0SA  United Kingdom
May 17, 2006 Equipped with chemical- and temperature-resistant ceramic top, microprocessor-controlled Model CB162 uses magnets and motor to produce stirring speed up to 1,500 rpm with volumes up to 15 liters. Independent safety circuit protects against overheating, and internal electronic components are protected against corrosion. HOT warning light flashes whenever plate temperature is above 50°C and will operate even when hotplate is turned off and is still connected to power.