AccuWeb, Inc.
Madison, WI 53707
Jun 02, 2004 WideArrayâ„¢ Edge Detector detects web edges passing through 18.4 in. wide edge detection range. When positioned on opposite sides of web in center guiding mode, detection range is doubled, providing 36.8 in. fully compensated detection. Wide detection range allows operators to change guide point or web width without manual adjustment. Detector is available in ultrasonic and infrared models.

AccuWeb, Inc.
Madison, WI 53707
Mar 17, 2004 Suited for printing, coating, and laminating operations that require spark-free environments, brushless web guide actuator directs electrical current to motor windings electronically. Design creates no sparks and reduces maintenance by eliminating need for brush replacement. It interfaces with Micro 4000® NET network-compatible controller and compensated array edge detectors.

Davis-Standard Corp.
Pawcatuck, CT 06379-2313
Feb 20, 2004 Horizontal 3-roll stack allows for casting, laminating, and sheet processes due to its ability to integrate different payoffs and winders. Machine is available in sizes from 12–30 in. wide, with single- and twin-screw extruders, in single- and multi-layer configurations. Each roll is independently servo driven, with precise roll dimensions and roll gaps available. Unit is suited for use by processors of complex applications requiring low melt-strength materials.

Nexen Group, Inc.
Vadnais Heights, MN 55127
Dec 04, 2003 Offered as pre-configured system that maintains steady web tension, RSD250 Dancer Unwind Package contains RSD250 controller, EN50 pressure converter, air filter, DPS60 dancer position sensor, and all cables and air line tubing. Controller uses air pressure to increase/decrease pneumatic brake torque, allowing dancer roller to remain at mid-travel position. User can set RSD250 for momentary or maintained start/stop signal, adapting to any tension situation.

i2S Line Scan
Niskayuna, NY 12309-0028
Nov 28, 2003 FLAW SCAN SYSTEM detects 0.3mm² defects on 2 m wide webs, running at 200 m/min. It contains embedded hardware and software with i2S technology for real-time defect detection on continuous web products. Features include real-time display and roll-map, statistical analysis of defect content, and power defect classification tool. Programmable alarm settings are offered for each defect class. Applications include paper, nonwovens, plastic films, metal-foil manufacturing.

SIMCO Industrial Static Control
Hatfield, PA 19440 1998
Jun 09, 2003 Neutro-Vac System incorporates vacuum system and static control to clean and neutralize static charges from web materials. System is comprised of vacuum hood assembly connected via ducting to dust collector. Hood assembly options include non-contact, contact, intrinsically safe non-contact, contact with compressed air, and Pneumatic Lift option. Pneumatic Lift moves hood up to 4 in., accommodating applications where extra room under hood is required for threading web.

Nexen Group, Inc.
Vadnais Heights, MN 55127
Apr 10, 2003 Microprocessor-based RSD200 Dancer Arm Controller incorporates adaptive control algorithm and maintains constant tension by compensating for tension disturbances. PC-based setup and calibration eliminates need for potentiometers and manual adjustments. Automatic, closed-loop system includes digital dancer position controller, EN50 electro-pneumatic transducer, DPS 30 or 60 dancer position sensor, and power supply.

COGNEX
Natick, MA 01760 2059
Feb 10, 2003 SmartView®, with OPC interface, ensures real-time inspection control and data access between surface inspection system and business/production/quality systems in mill. ODBC data access allows remote access to inspection data from mill information systems and third-party production data-management applications. System combines line-scan cameras, camera support unit, lighting, and image processing/analysis tools to detect and classify defects in papers, metals, non-wovens, and other materials.

Convertech
Wharton, NJ 07885 1800
Jan 16, 2003 Hand Crank Mechanical Shafts, available in diameters of 70 mm and larger, are designed specifically for narrow-web applications. Products are suited for light loads and provide moderate torque.

Martin Automatic, Inc.
Rockford, IL 61103 1202
Dec 23, 2002 Model SSBSC-IR performs butt splices at zero speed with single-sided tape always applied to same side of web. Splices may be made between labels, while single roller dancer maintains process speed during splicing operation. Product is available in various web widths and roll diameters.

Double E Co., Inc.
West Bridgewater, MA 02379
Nov 05, 2002 Model RK31 remote web guide controller is equipped to control up to 10 web guides at same time. It connects to web guide driver(s) using single Serial BUS RS485 cable to facilitate electrical installation requirements. Controller can receive signals from ultrasonic, infrared, and camera sensors for line, center, or edge guiding. RK31 includes LCD display that communicates instructions for initial calibration and for setting web guide parameters.

Invensys
Foxboro, MA 02035
Sep 27, 2002 Real-time, in-process Inspection Accelerator, designed to accelerate material processing, offers high-speed image capturing, processing, and analysis for defect and anomaly detection. It also provides classification, visualization, enunciation, tracking, and marking for unpatterned, continuous sheet and web materials. System inspects web speeds of more than 3000 fpm, web widths of more than 30 ft, and defect resolutions of less than 0.5 mm.

Dover Flexo Electronics, Inc.
Rochester, NH 03867
Sep 26, 2002 MAC MultiAmplifier Card and IMUX Tension Multiplexer provide multi-point tension monitoring. MAC amplifies signals from up to 8 tension transducers or load cells, and supplies corresponding number of 0 to 10 Vdc signals. Signals may be used as inputs to drives, PLCs, or other control devices. Additional 0 to 1 mA or 0 to l00 microA signal is supplied as meter output. IMUX can select and display up to 32 inputs from MACs or other tension amplifier devices.

Double E Co., Inc.
West Bridgewater, MA 02379
Mar 20, 2002 Double E/Re web guiding system utilizes 3-zone system with zero point centered in dead zone. Dead zone is flanked by slow and standard zones. System adjusts web if it moves away from zero point into slow or standard zones in exact proportion to problem. DC stepper motor requires little or no maintenance. Options include digital microprocessor control panels and edge, center, and line guide sensors.

Nexen Group, Inc.
Vadnais Heights, MN 55127
Mar 14, 2002 Dancer Control System includes RSD100 digital dancer position controller, EN50 electro-pneumatic transducer, DPS 30 or 60 dancer position sensor, and power supply. RSD 100 interfaces with brake, clutch or motor drive to provide stable web tension. Dancer position sensors accurately measure rotational movement of dancer arm. EN50 electro-pneumatic transducer allows RSD to interface directly with air engaged brakes/clutches.

Webex, Inc.
Neenah, WI 54957 1026
Dec 17, 2001 Air Turn bars flip web over or change its path 90 deg. Bars fit above or below other machinery, eliminating need for additional machine length. Multiple styles and configurations, including low-inertia and low-tension models, are avilable. Components are sized to meet application needs and have custom-drilled and grooved surfaces. Air turn bars, with adjustable alignment, install easily and can be built to accommodate any speed range.