Spectro Coating
Leominster, MA 01453
Jun 19, 2008 With nanotechnology finishing that withstands 150,000 double rubs, Primo 150 Upholstery Fabrics are suited for manufacturers of commercial, hospitality, and residential furniture and automotive, RV, and marine interiors as well as gaming surfaces. Textured fabrics can be cleaned using mild soap and warm water. Available in 55 in. rolls, upholstery fabrics are made using environmentally friendly water-based and low VOC chemicals.

Milliken & Co.
Spartanburg, SC 29304
Feb 26, 2008 Designed for industrial workwear, Amplitude(TM) is constructed of cotton/nylon blend designed to help mitigate potential injuries due to electric arc and flash fire exposure. This flame resistant fabric is processed ammonia-free and promotes freedom of movement through stretch. It offers Hazard Risk Category 2 electric arc protection for NFPA 70E, ASTM F1506, and OSHA 1910.269 compliance as well as flash fire NFPA 2112.

Spectro Coating
Leominster, MA 01453
Jan 18, 2008 Eliminating need for separate hanging panels and hardware, Spectro Two-in-One(TM) Drapery Fabric features one panel with fabric on front and blackout on back. Sunlight, temperature, and noise insulating drapery can be produced to coordinate with any interior design theme. Meeting NFPA 701 (2004), 100% blackout window treatment is suited for architects, interior designers, and converters and distributors of hospitality fabrics, motorhome interiors, and yacht builders.

DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
Oct 22, 2007 Featuring inherent flame resistance that will not diminish through laundering, bleaching, or wear, DuPont(TM) Protera(TM) fabrics are engineered to protect against electric arc hazards. They meet NFPA 70E Category 2 and National Electrical Safety Code (NESC) requirements while promoting comfort for electricians in industrial segments as well as utility workers. Garments made with this material do not require special laundry processing.

Diolen Industrial Fibers
ARNHEM 6800 TC  Netherlands
Sep 17, 2007 Made with Fortron® polyphenylene sulfide, high-tenacity Diofort® is inherently flame-retardant and chemical resistant. It can be combined with glass, carbon, and other polymer fibers to yield blended fabrics. In addition to reinforcing hydraulic oil hoses in power steering systems where it reduces noise and vibration, product can be applied in fuel lines and charge-air coolers to provide resistance to high pressure and temperature while allowing flexibility.

Kimberly-Clark Professional
Roswell, GA 30076
Aug 02, 2007 WypAll Microfiber Cloths feature Microban Antimicrobial Product Protection that removes bacteria from non-porous surfaces and helps prevent cross-contamination between surfaces. When bacteria come in contact with cloth, Microban penetrates cell wall of bacteria making it unable to function, grow, and reproduce. Thick, heavy, durable, and absorbent cloths hold up to 8x their weight in liquid and prevent bacterial growth even after repeated laundering.

Honeywell International, Inc.
Morristown, NJ 07960-4648
Jun 28, 2007 Transparent to radar, Spectra Shield® II fiber-based material is made from ultra-high molecular weight polyethylene using gel-spinning process. It exhibits resistance to chemicals, waters, and UV light as well as vibration damping, flex fatigue, and internal fiber-friction characteristics. Material is used for ballistic protection and security applications, from bullet-resistant vests, breastplates, and helmets to combat vehicles and military aircraft.

DuPont
Research Triangle Park, NC 27709-4425
Nov 15, 2006 Engineered to meet NFPA 70E Category 2 requirements, DuPont(TM) Protera(TM) Fabrics provide more comfort and longer lifecycle than FR cotton nylon blends. Inherent flame resistance will not diminish through laundering or bleaching and will not require special laundry processing. Available in fabric weights of 6.5 and 8.0 oz/sq-yd, Protera fabrics come in medium blue, khaki, and navy blue colors.

Safety Systems Corp.
Roselle, IL 60172
Oct 27, 2006 Offering natural flame resistance with no melt or drip characteristics, driFIRE(TM) line of hybrid performance wear is engineered to provide moisture management and comfort. They utilize moisture management performance of Dri-release® technology to deliver optimum balance of moisture-wicking and fast-drying performance. Garments combine soft feel with environmentally friendly odor neutralizing properties of FreshGuard®.

CMI Enterprises
Miami, FL 33014
Oct 13, 2006 With Dimensions Fabrics featuring Nanocide(TM) Antimicrobial, hospitals, clinics, dental offices, and nursing homes can provide environment that is essentially risk-free of contamination. Nanotechnology permanently embeds nanoparticles into surface area of product. When recommended cleaning instructions are followed, nanoparticles cannot be washed away, worn off, or depleted over time.

Norplex Micarta
Postville, IA 52162
Jul 03, 2006 Manufactured from woven aramid fiberglass fabric combined with phenolic compound, NP193PM has ambient flexural strength of 45,000 psi and hot flexural strength of 33,000 psi. Proprietary additive works as lubricant, minimizing friction and lowering operating temperatures by 50°. Suited for compressor vane applications, composite features dimensional stability that prevents pump blades from warping and causing pump to malfunction or disrupt vacuum seal.

E47
Broken Arrow, OK 74012
Feb 02, 2006 Featuring Smart Silver(TM) nanotechnology, Anti-Odor Fabrics include single-ply polyester at 4-5.5 oz/yd; plaited or double-ply polyester at 4-5.5 oz/yd; fleece in 100, 200, and 300 g, micro-denier and 4-way stretch; and athletic woven and twill at 5-9 oz/yd. SmartSilver additive permanently bonds to fibers without altering native characteristics. Applications include footwear, sporting goods, and industrial products such as helmets, gloves, uniforms, and upholstery.

Ferrari Textiles Corp.
Pompano Beach, FL 33069
Nov 29, 2005 Suited for new buildings, renovations, or building extensions, Stamisol FT 371 is rated with M1, B1, and Euroclass Bs2d0 fire classifications and withstands temperatures from -22 to 158°F. Controlled biaxial weaving performed on polyester scrim during coating process ensures dimensional stability in warp and weft directions. Custom-fitted to specific structure, composite textile acts as insulating barrier in cold weather and provides protection from sun in warmer months.

Pars Mfg. Co.
Ambler, PA 19002-4717
Dec 02, 2004 Manufactured from texturized fiberglass yarn, heat-resistant PARGLASS cloth contains no compound, cement, or wire and will not burn or smolder. It retains 25% of tensile strength, even when service conditions reach 1,000°F, and will not swell, shrink, deteriorate, or change chemically. Available in weights from 8.5–40 oz/yd², product can be aluminized on one side for thermal reflection or have brass or stainless steel wire inserts for increased tensile strength.

Johns Manville
Denver, CO 80202
Nov 17, 2004 LinaTex offers fabricators and installers abuse-resistant insulation for lining sheet metal air ducts. It is made from 100% post-industrial recycled, long strand fiberglass bonded with thermosetting resin. Airstream surface is protected from damage during fabrication by black fiberglass mat surface, and edge-coating covers leading edges per NAIMA/SMACNA requirements. Liner complies with ASTM C 1071 thermal and acoustical performance standards.

Johns Manville
Denver, CO 80202
Oct 20, 2004 Available in 4 mm fiber lengths for thermoplastics such as PA, PP, PBT, and SMA, ThermoFlow® strands exhibit processing, mechanical, and matrix bonding properties suited for extrusion applications. Product features minimal fines and bulk density as well as uniform bundle size and shape. Featuring consistent glass content, strands are suited for automotive, electrical and consumer goods applications.

Glen Raven Inc.
Glen Raven, NC 27217
Oct 12, 2004 Featuring NFPA70E Hazard Risk Category Rating of Class 2, GlenGuard™FR 6 oz fabric consists of blend of fibers, including Kermel® aramid, and is engineered to provide comfort and moisture management to help keep wearer cool and dry. Offering abrasion resistance, fabric is UL certified and meets Canadian Standards CGSB 155.20 for industrial flash fire protection. It is also in compliance with Canadian Wildland Firefighting standard CGSB 155.22.

Linq Industrial Fabrics, Inc.
Summerville, SC 29483 9665
Jul 14, 2004 CROHMIQ® Type D Fabric features humidity-independent coating with components that cannot wash off, migrate to surface, or contaminate bulk product inside FIBC. CROHMIQ fabrics offer protection against incendiary electrostatic discharges, and FIBCs do not require grounding. Fabric is suited for bulk storage or transport of dry food, and complies with Federal Food, Drug, and Cosmetic Act and applicable food additive regulations of FDA.

Linq Industrial Fabrics, Inc.
Summerville, SC 29483 9665
Oct 22, 2003 CROHMIQ® WHITE™ Type D static protective fabric, for manufacture of flexible intermediate bulk containers (FIBCs), is white with distinctive blue highlight yarns. It eliminates hazardous static discharges without requirement of grounding and with no special FIBC construction techniques. Fabric is offered in weights of 3.0 and 6.5 oz/yd².

Plastomer Products Division
Newtown, PA 18940 1803
Sep 17, 2003 PLASTOLON™ Fibers, available in flat format, can also be twisted in single or multiple strands to provide threads measuring from 600 denier and higher. Physical properties include thermal resistance to 550°F, resistance to intense UV exposure, and low co-efficient of friction. In particulate filtration applications, dust collector bags made with PLASTOLON™ Filtration Fibers withstand extreme operating temperatures and chemical environments.